POV-Ray

‘povray -H10 -W20 myscene.pov’ will generate a file with a picture 10 pixels high and 20 pixels wide, BUT in the message pane it displays

Image resolution.....20 by 10 (rows 1 to 20, columns 1 to 10)

instead of

Image resolution.....20 by 10 (rows 1 to 10, columns 1 to 20)

or

Image resolution.....20 by 10 (columns 1 to 20, rows 1 to 10) 

UV-mapped textures for parametrics are broken in POV-Ray 3.70 RC3, in cases where two (or more) parametrics overlap in a scene.

In the following scene, note how the texture per se is always taken properly from whichever parametric is in front, while the UV coordinates are erroneously taken always from the red parametric where both overlap, no matter whether it is in front or back.

camera {
  location  <0.0, 1.5, -3.0>
  direction 1.5*z
  right     x*image_width/image_height
  look_at   0
}

light_source { <-30, 30, -30> color rgb 1 }

#declare Param = parametric {
  function { u*v*sin (15*v) },
  function { v },
  function { u*v*cos (15*v) }
  0, 1
  contained_by { box { -1,1 } }
  accuracy 0.002
  precompute 15 x,y,z
  rotate 180*x
  translate  <0.3,0.5,0>
}

object {
  Param
  uv_mapping
  texture {
    pigment {
      gradient x frequency 3
      color_map {
        [0 color red .5 ]
        [1 color red 1 ]
      }
    }
  }
}

object {
  Param
  uv_mapping
  texture {
    pigment {
      gradient x frequency 7
      color_map {
        [0 color green .5 ]
        [1 color green 1 ]
      }
    }
  }
  rotate y*180
}

POV-Ray 3.62 renders the scene properly.

As this bug has been found during code inspection, the uderlying cause has already been identified; I’m currently working on a fix.

POV-Ray fails to accept UTF-8 encoded files with a leading Byte Order Mark.

According to the code it was intended to recognize a leading BOM (or, more precisely, leading non-ASCII code sequences) and automatically switch to UTF-8, so this must be considered a bug rather than a missing feature.

The configure script for unix uses a dumb string compare to test whether libpng version is 1.2.5 or higher, leading it to reject (for instance) libpng 1.2.27 and unnecessarily compile and statically link the older libpng version it comes with.

The following SDL code causes a hard crash during parsing if _3024_dot_dat is undefined:

light_source {
    <0, 0, 0>
    color rgb 0.5*<1,0.905882,0.211765>
    fade_distance 500
    fade_power 1.6
    looks_like {_3024_dot_dat texture {
        pigment { rgbf <1,0.905882,0.211765,0.90> }
        finish { ambient 0.6 diffuse 0 phong 0.5 phong_size 40
            reflection 0.9
            refraction 1 ior 1.25
            }
        }
}    } 

The following scene reders differently with POV-Ray 3.7.0.RC3 than with POV-Ray 3.6.2:

camera
{
    right x*image_width/image_height
    location  <0, 0, -5>
    look_at   <0, 0, 0>
}

light_source
{
    <0,0,0>
    color rgb 1
    looks_like
    {
        box {
            <-1,-1,-0.1>, <1,1,0.1>
            pigment { wood }
            finish { ambient 5.0 diffuse 0 specular 0 phong 0 reflection 0 }
            scale 0.5
        }
    }
    translate <1,0,0>
}

plane
{
    <0, 1, 0>, -1
    texture
    {
        pigment { color rgb <0.5, 0.5, 0.55> }
        finish { specular 1.0 }
    }
}

See attachments for the output. As can be seen, POV-Ray 3.7 does translate the shape of the looks_like object along with the light source, but fails to translate the textures.

If pretrace_start is set below pretrace_end, POV-Ray will run a high number of pretrace steps (without changing pretrace resolution).

When running make on Linux, the backend source files (and possibly others?) are apparently compiled twice: first from the .../source/backend/ directory, and another time from the .../source/ directory. As an example, here are the corresponding lines for sphsweep.cpp:

g++ -DHAVE_CONFIG_H -I. -I../.. -I../.. -I../../source -I../../source -I../../source/base -I../../unix -I../../vfe 
-I../../vfe/unix -pthread -I/usr/include/OpenEXR    -pthread -I/usr/include  -pipe -Wno-multichar -Wno-write-strin
gs -fno-enforce-eh-specs -s -O3 -ffast-math -pthread -MT sphsweep.o -MD -MP -MF .deps/sphsweep.Tpo -c -o sphsweep.
o `test -f 'shape/sphsweep.cpp' || echo './'`shape/sphsweep.cpp

g++ -DHAVE_CONFIG_H -I. -I..  -I.. -I../source/backend -I../source/base -I../source/frontend -I../unix -I../vfe -I.
./vfe/unix -pthread -I/usr/include/OpenEXR    -pthread -I/usr/include  -pipe -Wno-multichar -Wno-write-strings -fno
-enforce-eh-specs -s -O3 -ffast-math -pthread -MT sphsweep.o -MD -MP -MF .deps/sphsweep.Tpo -c -o sphsweep.o `test 
-f 'backend/shape/sphsweep.cpp' || echo './'`backend/shape/sphsweep.cpp

This is especially annoying on platforms that are rather slow at compiling.

original posting from povray.beta-test:

I get this error message:
"Parse Error: bad allocation  Render failed"
- after the code below has been running for about 3 seconds.

// ===== 1 ======= 2 ======= 3 ======= 4 ======= 5 ======= 6 ======= 7

#version 3.7;

#while (true)
  #local Fn = function { transform { translate <0, 0, 0> } }
  #undef Fn
#end // while

// ===== 1 ======= 2 ======= 3 ======= 4 ======= 5 ======= 6 ======= 7

I'm using POV-Ray for Windows - Version 3.7.0.RC3.msvc9-sse2.win32
The operating system is Windows XP.

With the code above, the error messages has so far appeared every time
right after 3318K tokens have been parsed. But with other versions of
my code, the error message does not always show up. (Sometimes the
render finishes and sometimes the parsing stops at different "times".)

[...]

Other users report no error message, but memory consumption rising to about 1.2 GB.

When aborting a render when there are unfinished blocks among finished ones, under certain conditions some of those blocks are skipped when continuing the render later.

Automatic removal of user-specified bounding boxes cannot be disabled in current POV-Ray 3.7 betas; the Remove_Bounds ini file setting and the +/-UR command line option are silently ignored.

Blobs are currently limited to 1,000,000 components (with each cylindrical component counting as three: one cylinder + two end hemispheres); this limit may have served a historic purpose, but is now entirely arbitrary: The remaining code is limited only by the available RAM and the numeric limits of the int data type. The arbitrary maximum components limit per blob should therefore be removed.

Aside from unnecessarily limiting the power of the blob component, another drawback of the current test is that it is only performed after parsing of all the blob’s components, potentially hours after the limit had actually been reached.

In pvengine.cpp (file revision 154), lines 4003-4006 are exact duplicates of lines 3999-4002:

3997    case KEYWORD_LOOKUP_MESSAGE :
3998         hh_aklink.pszKeywords = (LPCSTR) lParam ;

3999         if (strncmp (hh_aklink.pszKeywords, "oooo", 4) == 0)
4000           hh_aklink.pszKeywords = ""  ;
4001         if (strncmp (hh_aklink.pszKeywords, "//", 2) == 0)
4002           hh_aklink.pszKeywords = ""  ;

4003         if (strncmp (hh_aklink.pszKeywords, "oooo", 4) == 0)
4004           hh_aklink.pszKeywords = ""  ;
4005         if (strncmp (hh_aklink.pszKeywords, "//", 2) == 0)
4006           hh_aklink.pszKeywords = ""  ;

4007         HtmlHelp (NULL, engineHelpPath, HH_KEYWORD_LOOKUP, (DWORD_PTR) &hh_aklink) ;
4008         return (true) ;

This duplication appears pretty much useless to me - or am I missing something?

Currently, output image is buffered using POV-Ray’s RGBFT color model and floating point values, leading to a memory consumption of 20 bit per pixel. This is an unproportionally large memory footprint, given that the only further processing performed on the buffered data is conversion of the data to the desired output file format, which will typically use only 3 bytes per pixel (at most 12 bit per pixel).

The situation can be improved by choosing the output image buffer container based on the desired output file format and parameters. To this end, the following code changes should be made:

• Bundle image file format handler code into classes (typically one per file format)
• Include a method to determine the best data container type for the image buffer
• Instantiate the desired image file format handler object prior to rendering, querying the handler object for an image buffer

In addition to picking a suitable image data container from the already existing palette, careful design might also allow to use custom containers to directly pass the data to a library (in case the library provides its own buffering anyway), or write it directly to the output file (e.g. when writing image data to stdout). To make this compatible with multithreaded rendering, the following changes would have to be made:

• Add code to detect when a row of SMP blocks has been finished, and call a certain method on the image handler object
• Design the custom containers in such a way that they can buffer any number of unfinished SMP block rows as needed

In some cases it may be desirable to run POV-Ray from a batch file, without causing it to “steal the focus”.

I suggest making this dependant on whether POV-Ray is run with the /EXIT parameter.

When choosing PPM output with a bit depth other than 8 bits per color channel (e.g. +FP16), POV-Ray messes up the colors (see thread news://news.povray.org:119/4babb48f$1@news.povray.org)

The following (bogus) SDL code causes POV-Ray 3.7 beta to crash hard with an access violation:

#include "fubar.inc"
Bar(42)
#macro FooBar() #end

//fubar.inc
#macro Foo(Fnord) #end
#macro Bar(Ignord) Foo(23 #end

The following code is erroneously accepted by POV-Ray (tested with 3.7.0.beta.36):

pigment{
  slope { x }
  checker
}

The result is a checker pattern.

Apparently there is an EXIT statement missing in the slope-pattern parsing code in parstxtr.cpp.

The following scene shows how photons are “boosted” by pass_through objects; removing one of the boxes will reduce the effect; the effect can be seen with 3.6 as well as current betas:

global_settings {
  max_trace_level 10 // makes a difference!
  photons { spacing 0.02 }
}

camera {
  right x*image_width/image_height
  location  <0,2.6,-10>
  look_at   <0,0.75,0>
}

light_source {
  <500,500,150>
  color rgb 1.3
  photons {
    refraction on
    reflection on
  }
}

sky_sphere {
  pigment {
    gradient y
    color_map {
      [0.0 rgb <0.6,0.7,1.0>]
      [0.7 rgb <0.0,0.1,0.8>]
    }
  }
}

plane {
  y, 0
  texture { pigment { color rgb <1.0, 0.8, 0.6> } }
}

#declare M_Glass=
material {
  texture {
    pigment {rgbt 1}
    finish {
      ambient 0.0
      diffuse 0.05
      specular 0.6
      roughness 0.005
      reflection { 0.1, 1.0 fresnel on }
      conserve_energy
    }
  }
  interior {
    ior 1.5
    fade_power 1001
    fade_distance 0.9
    fade_color <0.5,0.8,0.6>
  }
}


sphere {
  <1.1,1,-1.3>, 1
  material { M_Glass }
  photons {
    target 1.0
    refraction on
    reflection on
  }
}

cylinder {
  <-1.2,0.01,0.8>, <-1.2,2.5,0.8>, 1
  material { M_Glass }
  photons {  // photon block for an object
    target 1.0
    refraction on
    reflection on
  }
}

box {
  <2.4,0,-2.3>, <2.6,4,-0.3>
  material { M_Glass }
  photons { pass_through }
}

box {
  <2.9,0,-2.3>, <3.1,4,-0.3>
  material { M_Glass }
  photons { pass_through }
}

The code to attenuate transmitted photons according to surface texture was apparently duplicated during refactoring of the source code for version 3.7. Behavior has changed from 3.6 to 3.7 (beta.36) accordingly, as can be demonstrated with the following scene:

global_settings {
  assumed_gamma 1.0
  max_trace_level 10
  photons { spacing 0.02 }
}

camera {
  right x*image_width/image_height
  location  <0,2.6,-10>
  look_at   <0,0.75,0>
}

light_source {
  <500,300,150>
  color rgb 1.3
  photons {
    refraction on
    reflection on
  }
}

sky_sphere {
  pigment {
    gradient y
    color_map {
      [0.0 rgb <0.6,0.7,1.0>]
      [0.7 rgb <0.0,0.1,0.8>]
    }
  }
}

plane {
  y, 0
  texture { pigment { color rgb <1.0, 0.8, 0.6> } }
}

#declare M_Glass=
material {
  texture {
    pigment {rgbt 1}
    finish {
      ambient 0.0
      diffuse 0.05
      specular 0.6
      roughness 0.005
      reflection { 0.1, 1.0 fresnel on }
      conserve_energy
    }
  }
  interior {
    ior 1.5
    fade_power 1001
    fade_distance 0.9
    fade_color <0.5,0.8,0.6>
  }
}

#declare M_PseudoGlass2=
material {
  texture {
    pigment {rgbf <0.8,0.2,0.2,0.8>}
    finish {
      ambient 0.0
      diffuse 0.05
      specular 0.6
      roughness 0.005
      reflection { 0.1, 1.0 fresnel on }
      conserve_energy
    }
  }
  interior {
    ior 1.0
  }
}

sphere {
  <1.1,1,-1.3>, 1
  material { M_Glass }
  photons {
    target 1.0
    refraction on
    reflection on
  }
}

box {
  <2.4,0,-2.3>, <2.6,4,0.3>
  material { M_PseudoGlass2 }
  photons { target 1.0 refraction on reflection on }
}

According to the docs, the panoramic camera...

[...] uses a type of cylindrical projection to be able to use viewing angles larger than 180 degrees with a tolerable lateral-stretching distortion. The angle keyword is used to determine the viewing angle.

However, current implementation differs (and probably always has): The angle keyword has no effect, and the effective viewing angle is fixed to 180 degrees. Also note that this behaviour is identical to the spherical camera with angle 180,180, making the panoramic camera obsolete.

I propose to deprecate the “panoramic” keyword; should the keyword be encountered in a camera block, the code for the spherical camera should be used instead, except that the angle setting should be forced to 180,180; this should be accompanied by a parse warning.

POV-Ray 3.7 does not show output options, such as:

Output Options
  Image resolution 640 by 480 (rows 1 to 480, columns 1 to 640).
  Output file: D:\foo\test.png, 24 bpp PNG
  Graphic display......On  (gamma: 2.2)
  Mosaic preview.......Off
  CPU usage histogram..Off
  Continued trace......Off

(the above is what 3.6 used to show)

Setting File_Gamma=1.0 produces unexpectedly bright output files for most output file formats, as if File_Gamma was set to 2.2 instead.

The underlying problem is a bug that, when File_Gamma is set to exactly 1.0, causes the encoding gamma function to be undefined, which was not meant to happen in current versions, and instead was reserved for future versions to signal that a file-format-specific default encoding gamma should be used. The image file output handlers already support this, most of them choosing the sRGB transfer function, giving roughly the same output as setting File_Gamma=2.2.

As a preliminary workaround, users may want to set File_Gamma=1.02 (any value smaller than 0.99 or greater than 1.01 should do).

OpenEXR output currently writes an alpha channel when Output_Alpha=off (-UA), and does not write an alpha channel when Output_Alpha=on (+UA), i.e. doing it just the wrong way round.

polygon objects comprised of multiple “sub-polygons” don’t work properly if start/end points of sub-polygons do not exactly match, as can be demonstrated by the following code:

#default { texture { pigment { rgb 1 } finish { ambient 1.0} } }

camera {
  orthographic
  up 3.5*y
  right 3.5*x*image_width/image_height
  location  <0,0,-4>
  look_at   <0,0,0>
}

polygon { 8,
  // outer triangle
  0.70 * < cos(  0 *pi/180),sin(  0 *pi/180),0>
  0.70 * < cos(120 *pi/180),sin(120 *pi/180),0>
  0.70 * < cos(240 *pi/180),sin(240 *pi/180),0>
  0.70 * < cos(360 *pi/180),sin(360 *pi/180),0>

  // inner triangle
  0.35 * < cos(  0 *pi/180),sin(  0 *pi/180),0>
  0.35 * < cos(120 *pi/180),sin(120 *pi/180),0>
  0.35 * < cos(240 *pi/180),sin(240 *pi/180),0>
  0.35 * < cos(360 *pi/180),sin(360 *pi/180),0>
}

Note that the end points /should/ be identical. There are however some minor rounding differences, which mess up polygon computations. Compare with the following code, which leads to the desired results:

polygon { 8,
  // outer triangle
  0.70 * < cos(  0 *pi/180),sin(  0 *pi/180),0>
  0.70 * < cos(120 *pi/180),sin(120 *pi/180),0>
  0.70 * < cos(240 *pi/180),sin(240 *pi/180),0>
  0.70 * < cos(  0 *pi/180),sin(  0 *pi/180),0>

  // inner triangle
  0.35 * < cos(  0 *pi/180),sin(  0 *pi/180),0>
  0.35 * < cos(120 *pi/180),sin(120 *pi/180),0>
  0.35 * < cos(240 *pi/180),sin(240 *pi/180),0>
  0.35 * < cos(  0 *pi/180),sin(  0 *pi/180),0>
}

Code inspection shows that the polygon insideness testing code tests for precise equality of the points, whereas the general policy of POV-Ray is to accept slight rounding differences.

When rendering a series of scenes (e.g. animation, or render queue in POV-Ray for Windows), number_of_waves is not properly reset to its default value between scenes, causing the parameter to default to the value set by the previous scene.

For instance, rendering the following scenes from a queue will cause “arches.pov” to be rendered differently the second time:

1. scenes\textures\finishes\arches.pov
2. scenes\textures\normals\normavg.pov
3. scenes\textures\finishes\arches.pov (again!)

Multi-textured blobs are broken with 3.7 beta 40 when used inside an intersection, as can be demonstrated by the following scene:

#default { texture { pigment { rgb 1 } } }

camera {
  right x*image_width/image_height
  location  <0,1.5,-4>
  look_at   <0,1,0>
}

light_source { <500,500,-500> color rgb 1 }

difference { blob {
  threshold 0.6
  sphere { < 0.75,   0,    0>, 1, 1 texture { pigment { color red 1 } } }
  sphere { <-0.375,  0.65, 0>, 1, 1 texture { pigment { color green 1 } } }
  sphere { <-0.375, -0.65, 0>, 1, 1 }
} }

With POV-Ray 3.7.0 beta 40, the entire blob is rendered with the default texture.

The same problem can be seen with “difference” or “merge” instead of “intersection”.

Omitting the CSG “envelope”, using “union”, or assigning the blob to a variable first and then using it inside an intersection, will yield the expected result.

POV-Ray 3.62 renders all variants as expected.

According to initial analysis, the problem appears to be caused by the dual use of the “MULTITEXTURE_FLAG”, which is used in CSG to indicate use of the “cutaway_textures” feature, and in blobs to indicate per-element texturing. (The same flag is also used in meshes to indicate per-face or per-vertex texturing, so similar problems are to expected there.)

My proposal is to use an entirely separate flag for the “cutaway_textures” feature (the blob and mesh can safely continue to share the MULTITEXTURE_FLAG).

Trace level is not handled properly with blobs using per-component reflective or refractive textures, leading to lockups. Stepping through the code, it seems that POV-Ray fails to properly mark the blob object as increasing the trace level.

(Until this bug is fixed, the issue can be worked around in most cases by assigning a reflective texture to the blob as a whole.)

Reflections in multi-layered textures are broken in 3.7 betas, as can be demonstrated with the following scene showing two reflective hemispheres on a checkered plane:

camera {
  location  <1.0, 0.5, -4.0>
  direction 1.5*z
  right     x*image_width/image_height
  look_at   <0.0, 0.0,  0.0>
}

sky_sphere {
  pigment {
    gradient y
    color_map {
      [0.0 rgb <0.6,0.7,1.0>]
      [0.7 rgb <0.0,0.1,0.8>]
    }
  }
}

light_source {
  <0, 0, 0>            // light's position (translated below)
  color rgb <1, 1, 1>  // light's color
  translate <-30, 30, -30>
}

default {
 finish { diffuse 0 ambient 0 specular 0 }
}

// ----------------------------------------

plane {               // checkered floor
  y, -1
  texture
  {
    pigment { checker color rgb 1 color blue 1 }
    finish{ diffuse 0.8 ambient 0.1 }
  }
}

// left hemisphere
intersection {
  sphere { 0, 1 }
  plane { x, -0.002 }
  texture {
    pigment { color rgb 1 }
    finish{ reflection { 0.5 } }
  }
  texture {
    pigment { color rgbt 1 }
    finish{ reflection { 0.4 } }
  }
  texture {
    pigment { color rgbt 1 }
    finish{ reflection { 0.1 } }
  }
}

// right hemisphere
intersection {
  sphere { 0, 1 }
  plane { -x, -0.002 }
  texture {
    pigment { color rgb 1 }
    finish{ reflection { 1.0 } }
  }
}

Note that the reflection parameters of the left, multi-layered hemisphere sum up to 1.0, i.e. the same value as used in the single layer in the right hemisphere.

The first attached file (test_3.6.2.png), rendered with POV-Ray 3.6.2, shows the expected output: Both hemispheres appear to have the same reflectivity.

The second attached file (test_3.7.0.beta37a.png), rendered with POV-Ray 3.7.0.beta.37a, shows a much brighter left (multi-layered) sphere.

As it turns out, in order to get the expected result with POV-Ray 3.7.0.beta.37a, the reflectivity of each layer must be divided by 3, 2 and 1, respectively (which obviously does not sum up to 1.0):

  ...
  texture {
    pigment { color rgb 1 }
    finish{ reflection { 0.5 / 3 } }
  }
  texture {
    pigment { color rgbt 1 }
    finish{ reflection { 0.4 / 2 } }
  }
  texture {
    pigment { color rgbt 1 }
    finish{ reflection { 0.1 / 1 } }
  }
  ...

The following scene demonstrates how media sampling method 3 gives inaccurate results with scattering media.

The scene shows four spheres with uniform media, using (left to right) sampling methods 1, 2 and 3 with default settings, and sampling method 3 with high minimum sample count, respectively.

Note how changing the sample count significantly affects the result, despite the media being uniform.

Code analysis shows that the root cause is an underestimation of the extinction effect on the light scattered by the media, corresponding in order of magnitude to half the distance between mandatory samples (as defined by minimum sample count).

The effect also leads to visible artifacts when nesting hollow objects inside the media, as can be demonstrated by un-commenting the four smaller spheres.

#version 3.7;

camera {
  perspective angle 25
  location  <0.0 , 0.0 ,-20.0>
  right     x*image_width/image_height
  look_at   <0.0 , 0.0 , 0.0>
}

light_source {
  <0,3000,-3000> color rgb 1
}

background { color rgb 0.5 }

plane {
  <0,1,0>, -1
  texture { pigment { checker color rgb<1,1,1>*1.2 color rgb<0.25,0.15,0.1>*0 } }
}

#declare T_Transparent = texture {
  pigment { color rgbt <1,1,1,1> } finish { diffuse 1 }
}

sphere { <-3,0,0>, 1.00 
  texture { T_Transparent }
  hollow
  interior {
    media {
      scattering { 1 color rgb 2 extinction 1 }
      method 1
    }
  }
}

sphere { <-1,0,0>, 1.00 
  texture { T_Transparent }
  hollow
  interior {
    media {
      scattering { 1 color rgb 2 extinction 1 }
      method 2
    }
  }
}

sphere { <1,0,0>, 1.00 
  texture { T_Transparent }
  hollow
  interior {
    media {
      scattering { 1 color rgb 2 extinction 1 }
      method 3
    }
  }
}

sphere { <3,0,0>, 1.00 
  texture { T_Transparent }
  hollow
  interior {
    media {
      scattering { 1 color rgb 2 extinction 1 }
      method 3
      samples 100
    }
  }
}

/*
sphere { <-3,0,0>,0.8 texture { T_Transparent } hollow }
sphere { <-1,0,0>,0.8 texture { T_Transparent } hollow }
sphere { < 1,0,0>,0.8 texture { T_Transparent } hollow }
sphere { < 3,0,0>,0.8 texture { T_Transparent } hollow }
*/

When using fade_distance and fade_power in combination with area_illumination, the light source fading is not applied to materials with subsurface scattering; see the following code for an example:

#version 3.7;
global_settings {
  assumed_gamma 1.0
  mm_per_unit 10
  subsurface { samples 200,20 }
}

camera {
  right x*image_width/image_height
  angle 30
  location  <0,1.5,-4>
  look_at   <0,0,0>
}

sky_sphere {
  pigment {
    gradient y
    color_map {
      [0.0 rgb <0.6,0.7,1.0>]
      [0.7 rgb <0.0,0.1,0.8>]
    }
  }
}

plane {
  y, 0
  texture {
    pigment {
      checker
      color rgb <1.0, 0.8, 0.6>
      color rgb <1.0, 0.0, 0.0>
      scale 0.5
    }
  }
}

light_source {
  <50,50,50>
  color rgb 30
  area_light 5*x,5*y,17,17 adaptive 1 jitter circular orient
  area_illumination on
  fade_distance 10
  fade_power 2
}

cylinder {
  <0,0,0>, <0,0.2,0> 1
  texture {
    pigment { color rgb 1 }
    finish {
      ambient 0
      diffuse 0.7
      specular albedo 0.3
      reflection { 0.3 fresnel }
      conserve_energy
      subsurface { translucency 0.1 }
    }
  }
  interior { ior 1.5 }
}

sphere {
  <0,0.4,0>, 0.2
  texture {
    pigment { color rgb <1,0.6,0.0> }
    finish {
      ambient 0
      diffuse 0.0
      specular albedo 0.8 metallic
      reflection { 1.0 metallic }
      conserve_energy
    }
  }
}

POV-Ray 3.7-generated JPEG image output files do not conform to the JFIF standard. Most importantly, the files written do not use the standard YCbCr color model (they seem to use plain RGB instead), nor do they have a proper JFIF tag.

As a consequence, some software may be unable to read the generated JPEG files properly. In addition, it seems that POV-Ray mixes up the Red and Blue channels.

As the following scene demonstrates, the “inverse” keyword produces unexpected results with quadrics.

Left: a sphere primitive as reference
Right: a sphere-shaped quadric primitive (sphere-shaped)

Top: plain
Bottom: inverse

The objects are clipped in half to better demonstrate the effect. Regular texture is shown in white, interior_texture in red; the surface normal of a selected point (blue) as returned by trace() is shown in green.

Note how the sphere’s surface normal, as well as the textures, are flipped when “inverse” is used (this is the intended standard behaviour of all objects), while the quadric’s normal and textures erroneously remain uchanged.

// +w800 +h600

#version 3.7;

global_settings{ assumed_gamma 1.0 }

#default{ finish { ambient 0.1 diffuse 0.9 specular 0.5 }} 

camera {
  perspective
  angle 40
  right     x*image_width/image_height
  location  <0,0,-10>
  look_at   <0,0,0>
}

light_source{ < 1000,3000,-3000> color rgb 1 }

background { color rgb 0.5 }

#declare T_White = texture { pigment { color rgb   1 } }
#declare T_Red   = texture { pigment { color red   1 } }
#declare T_Green = texture { pigment { color green 1 } }
#declare T_Blue  = texture { pigment { color blue  1 } }

#declare TopLeft     = sphere { 0, 1 }
#declare BottomLeft  = sphere { 0, 1 inverse }

#declare TopRight    = quadric { <1,1,1>, <0,0,0>, <0,0,0>, -1 }
#declare BottomRight = quadric { <1,1,1>, <0,0,0>, <0,0,0>, -1 inverse }

#macro Mac(Obj, P, D)
  union {
    #local N = <0,0,0>;
    #local O = <-0.6,0.4,-10>;
    #local Q = trace(Obj, O, D, N);
    #if (vlength(N) > 0)
      sphere { Q, 0.05 texture { T_Blue } }
      cylinder { Q, Q + N, 0.02 texture { T_Green } }
    #else
      cylinder { O, O + D*10000, 0.02 texture { T_Red } }
    #end
    object { Obj texture { T_White } interior_texture { T_Red } clipped_by { box { <-1,-1,-1>, <0,1,1> rotate y*30 } } }
    translate P
  }
#end

Mac(TopLeft,     <-1.2, 1.2, 0>, z)
Mac(TopRight,    < 1.2, 1.2, 0>, z)
Mac(BottomLeft,  <-1.2,-1.2, 0>, z)
Mac(BottomRight, < 1.2,-1.2, 0>, z)

As the following scene demonstrates, the “inverse” keyword produces unexpected results with fractals.

Left: a sphere primitive as reference
Right: a julia fractal

Top: plain
Bottom: inverse

The objects are clipped in half to better demonstrate the effect. Regular texture is shown in white, interior_texture in red; the surface normal of a selected point (blue) as returned by trace() is shown in green.

Note how the sphere’s surface normal, as well as the textures, are flipped when “inverse” is used (this is the intended standard behaviour of all objects), while the fractal’s normal and textures erroneously remain uchanged.

// +w800 +h600

#version 3.7;

global_settings{ assumed_gamma 1.0 }

#default{ finish { ambient 0.1 diffuse 0.9 specular 0.5 }} 

camera {
  perspective
  angle 40
  right     x*image_width/image_height
  location  <0,0,-10>
  look_at   <0,0,0>
}

light_source{ < 1000,3000,-3000> color rgb 1 }

background { color rgb 0.5 }

#declare T_White = texture { pigment { color rgb   1 } }
#declare T_Red   = texture { pigment { color red   1 } }
#declare T_Green = texture { pigment { color green 1 } }
#declare T_Blue  = texture { pigment { color blue  1 } }

#declare TopLeft     = sphere { 0, 1 }
#declare BottomLeft  = object { TopLeft inverse }

#declare TopRight    = julia_fractal{ <-0.083,0.0,-0.83,-0.025> quaternion sqr max_iteration 8 precision 20 scale 0.9 }
#declare BottomRight = object { TopRight inverse }

#macro Mac(Obj, P, D)
  union {
    #local N = <0,0,0>;
    #local O = <-0.6,0.4,-10>;
    #local Q = trace(Obj, O, D, N);
    #if (vlength(N) > 0)
      sphere { Q, 0.05 texture { T_Blue } }
      cylinder { Q, Q + N, 0.02 texture { T_Green } }
    #else
      cylinder { O, O + D*10000, 0.02 texture { T_Red } }
    #end
    object { Obj texture { T_White } interior_texture { T_Red } clipped_by { box { <-2,-2,-2>, <0,2,2> rotate y*30 } } }
    translate P
  }
#end

Mac(TopLeft,     <-1.2, 1.2, 0>, z)
Mac(TopRight,    < 1.2, 1.2, 0>, z)
Mac(BottomLeft,  <-1.2,-1.2, 0>, z)
Mac(BottomRight, < 1.2,-1.2, 0>, z)

Subsurface scattering must be made radiosity-aware.

The parser does not accept mesh objects (or CSG objects including a mesh object) as a parameter to the inside() built-in function, reporting error “Solid object identifier expected”, even if the mesh is “solidified” by specifying an inside_vector.

(see news://news.povray.org:119/4a983716@news.povray.org)