|
55 | Image format | Definite Bug | 3.70 beta 32 | Very Low | Medium | Output_Alpha=on doesn't work as documented | Closed | |
|
Task Description
I have installed POV-Ray 3.7 beta 34 on Windows 7 The setting ‘Output_Alpha=on’ doesn’t work as documented. With this setting the Background appear black and the scene is transparent.
Check with this Code:
camera {
location <3, 3, -3>
direction <0, 0, 2.9>
look_at <0, 0, 0>
right 1.0*x
}
light_source { < 3, 3, -3> color red 1 green 1 blue 1 }
sphere
{
<0,0,0> 0.8
pigment {color rgb<1,1,0>}
finish
{
ambient 0.2
diffuse 0.8
}
}
and with this ini file:
Input_File_Name=C:\Users\dfv_rei1\AppData\Local\Temp\Cuadrigula\PreviewObject.pov
Output_File_Name=C:\Users\dfv_rei1\AppData\Local\Temp\Cuadrigula\PreviewObject.tga
Output_File_Type=t
Output_Alpha=on
Bits_Per_Color=24
+W121 +H121
+a0.3
+q11
+a
|
|
56 | Texture/Material/Finish | Possible Bug | 3.70 beta 34 | Very Low | Medium | Crackle pattern in some situations can cause runaway me ... | Closed | |
|
Task Description
(This happens as of beta 34)
The following scene will cause POV-Ray to allocate memory until all available memory is used, resulting in an Out of Memory error message:
#declare n1 = normal
{
crackle .5
scale 0.001
accuracy 0.0001
}
#declare n2 = normal
{
bumps 0
}
camera
{
location <0, 0.2, -1>
look_at <0.4, 0.3, 1>
focal_point <0.4, 0.3-.0, 1>
blur_samples 25
confidence .9
variance 0
aperture .05
}
light_source
{
<-10, 10,-5>, rgb 1.5
area_light x*2,y*2,7,7 orient adaptive 2
}
sphere{ <0, 0, 0>, 0.5 pigment {color rgbf <0.85,1,.95,1>}
interior
{
ior 1.5
fade_color rgb <0.0, 0.5, 0.0>
fade_power 2
fade_distance 10.5
dispersion 1.1
dispersion_samples 100
}
normal {
checker normal{n2} normal{n1}
scale 0.1
warp { spherical }
}
translate z*1
}
|
|
57 | Texture/Material/Finish | Definite Bug | 3.70 beta 34 | Very Low | Medium | Compressed TIFF image_map renders all transparent | Closed | |
|
Task Description
The attached TIFF file was created with IC using compression. When used in an image_map, POV-Ray 3.7.0.beta.34 on Windows XP x64 renders the image all transparent, while POV-Ray 3.6.2 renders the file fine. The same effect can be seen with LZW-compressed TIFF files created with Adobe Photoshop 6.0.
Uncompressed TIFF files created with either IC or Photoshop render fine in both versions of POV-Ray.
Stepping through the code of POV-Ray 3.7.0 shows that the same code path is taken regardless of compression, but the libtiff library returns different alpha channel values, indicating a problem in that library. POV-Ray 3.7 still uses libtiff 3.6.1, whereas the POV-Ray 3.6 branch has been updated to libtiff 3.8.2, which according to the change history includes a few alpha-related changes.
|
|
61 | Other | Definite Bug | 3.70 beta 34 | Low | Medium | Dispersion does not give proper results | Closed | |
|
Task Description
Source code inspection during examination of issues with the scene published at http://povray.sitewww.ch/?p=177 show the following issues with current (beta.34) implementation of dispersion in POV-Ray 3.7:
While this still allows to use dispersion for artistic effect, it is neither physically realistic, nor does it match 3.6 behavior.
|
|
93 | Photons | Definite Bug | 3.70 beta 36 | Very Low | Medium | Photons are unnaturally amplified by pass_through objec ... | Closed | |
3.70 release |
Task Description
The following scene shows how photons are “boosted” by pass_through objects; removing one of the boxes will reduce the effect; the effect can be seen with 3.6 as well as current betas:
global_settings {
max_trace_level 10 // makes a difference!
photons { spacing 0.02 }
}
camera {
right x*image_width/image_height
location <0,2.6,-10>
look_at <0,0.75,0>
}
light_source {
<500,500,150>
color rgb 1.3
photons {
refraction on
reflection on
}
}
sky_sphere {
pigment {
gradient y
color_map {
[0.0 rgb <0.6,0.7,1.0>]
[0.7 rgb <0.0,0.1,0.8>]
}
}
}
plane {
y, 0
texture { pigment { color rgb <1.0, 0.8, 0.6> } }
}
#declare M_Glass=
material {
texture {
pigment {rgbt 1}
finish {
ambient 0.0
diffuse 0.05
specular 0.6
roughness 0.005
reflection { 0.1, 1.0 fresnel on }
conserve_energy
}
}
interior {
ior 1.5
fade_power 1001
fade_distance 0.9
fade_color <0.5,0.8,0.6>
}
}
sphere {
<1.1,1,-1.3>, 1
material { M_Glass }
photons {
target 1.0
refraction on
reflection on
}
}
cylinder {
<-1.2,0.01,0.8>, <-1.2,2.5,0.8>, 1
material { M_Glass }
photons { // photon block for an object
target 1.0
refraction on
reflection on
}
}
box {
<2.4,0,-2.3>, <2.6,4,-0.3>
material { M_Glass }
photons { pass_through }
}
box {
<2.9,0,-2.3>, <3.1,4,-0.3>
material { M_Glass }
photons { pass_through }
}
|
|
144 | Image format | Compatibility Issue | 3.6 | Very Low | Medium | povray compatibility issue with png-1.4 | Closed | |
3.70 beta 39 |
Task Description
source/png_pov.cpp included in povray-3.6.1 contains calls to an internal function of libpng (png_write_finish_row) which was removed from the public interface quite a while ago, so linking fails.
Also, in the 1.4 releases of libpng, the info_struct “trans” member was renamed to trans_alpha. This causes a compilation error in the same file.
A suggestion for the solution: a) remove the png_write_finish_row prototype and function call b) add something like: #if PNG_LIBPNG_VER < 10400 #define trans_alpha trans #endif and change cmap[index].Transmit = 255 - r_info_ptr→trans[index]; to cmap[index].Transmit = 255 - r_info_ptr→trans_alpha[index]; (two occurrences).
|
|
155 | Runtime error | Definite Bug | 3.70 beta 38 | Very Low | Medium | Not able to run --benchmark | Closed | |
3.70 beta 39 |
Task Description
Compiled on linux (revision #5066), ./configure COMPILED_BY=”###” –disable-io-restrictions
the command: povray –benchmark
is failing: Failed to parse INI file
povray –version
povray: this pre-release version of POV-Ray for Unix expires in 27 day(s) and 5 hour(s) POV-Ray 3.7.0.beta.38
This is a time-limited beta test version which expires 31 Dec 2010. General distribution is strongly discouraged.
Copyright 1991-2003 Persistence of Vision Team Copyright 2003-2010 Persistence of Vision Raytracer Pty. Ltd.
Built-in features:
I/O restrictions: disabled
X Window display: enabled (using SDL)
Supported image formats: gif tga iff ppm pgm hdr png jpeg tiff openexr
Unsupported image formats: -
Compilation settings:
Build architecture: x86_64-unknown-linux-gnu
Built/Optimized for: x86_64-unknown-linux-gnu (using -march=native)
Compiler vendor: gnu
Compiler version: g++ 4.4.3
Compiler flags: -pipe -Wno-multichar -Wno-write-strings -fno-enforce-eh-specs -s -O3 -ffast-math -march=native -pthread
|
|
157 | Include files | Definite Bug | 3.70 beta 37a | Very Low | Medium | Warnings when parsing include file provided by distribu ... | Closed | |
3.70 beta 39 |
Task Description
Include file golds.inc still provides warnings when parsed, a shame for a standard include file. (colors.inc is ok, I did not test the other includes)
File '/usr/local/share/povray-3.7/include/golds.inc' line 118: Parse Warning:
Expected pure RGB color expression, unexpected filter and transmit components
will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 119: Parse Warning:
Expected pure RGB color expression, unexpected filter and transmit components
will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 129: Parse Warning:
Expected pure RGB color expression, unexpected filter and transmit components
will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 130: Parse Warning:
Expected pure RGB color expression, unexpected filter and transmit components
will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 140: Parse Warning:
Expected pure RGB color expression, unexpected filter and transmit components
will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 141: Parse Warning:
Expected pure RGB color expression, unexpected filter and transmit components
will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 151: Parse Warning:
Expected pure RGB color expression, unexpected filter and transmit components
will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 152: Parse Warning:
Expected pure RGB color expression, unexpected filter and transmit components
will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 162: Parse Warning:
Expected pure RGB color expression, unexpected filter and transmit components
will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 163: Parse Warning:
Expected pure RGB color expression, unexpected filter and transmit components
will have no effect.
|
|
168 | Texture/Material/Finish | Definite Bug | 3.70 beta 38 | Very Low | Medium | noise_generator default broken | Closed | |
3.70 beta 40 |
Task Description
[Original Title: “texture_map interpolation does not work correctly for some patterns”]
The below test scene should yield identical textures T_STRAND1 and T_STRAND2 but this is not the case. Reported and verified in
http://news.povray.org/povray.general/thread/%3C4cbd804b%241%40news.povray.org%3E/
The problem seems to affect bozo, bumps, dents, granite, spotted, and maybe wrinkles. The problem was reported earlier in
http://news.povray.org/povray.beta-test/thread/%3C48112367%241%40news.povray.org%3E
with a comment that 3.6 gives the expected results
#declare C_STRAND = color rgb 1;
#declare C_CLEAR = color rgb 0;
#declare T_STRAND = texture
{
pigment {color C_STRAND}
}
#declare T_CLEAR = texture
{
pigment {color C_CLEAR}
}
#declare T_STRANDS1 = texture
{
pigment
{
granite scale 2 color_map
{
[0.0 color C_STRAND]
[0.5 color C_CLEAR]
[1.0 color C_CLEAR]
}
}
}
#declare T_STRANDS2 = texture
{
granite scale 2 texture_map
{
[0.0 T_STRAND]
[0.5 T_CLEAR]
[1.0 T_CLEAR]
}
}
plane
{
z, 10
texture {T_STRANDS1}
//texture {T_STRANDS2}
}
|
|
198 | Parser/SDL | Definite Bug | 3.70 RC3 | Very Low | Medium | Missing closing brace in function definition causes mem ... | Closed | |
3.70 RC4 |
Task Description
Given the following two statements, a missing closing brace in the function declaration fn should throw a parse exception; instead it causes a memory access violation when trying to use fn in the second delcaration:
#local fn = function {
pigment { image_map { png "MultiPassBlobs3.png" gamma 1 map_type 0 once }}
#local clr = fn(0,0,0);
|
|
209 | Geometric Primitives | Definite Bug | 3.70 RC3 | Very Low | Medium | Weighted texture of CSG | Closed | |
3.70 RC4 |
Task Description
in change #3319, csg got a new computation for its weighted textures.
But I’m confused by the computation of the weight: (circa end of csg.cpp file)
COLC weight = 1.0f / min(COLC(textures.size() - firstinserted), 1.0f);
I would have used a max() rather than a min().
It is transparent when there is only one texture, but:
should there be no texture (an error...): it would be a division by 0
should there be more than 1, the weight of each would be 1. which is without consequence UNLESS there is already some other textures in the list. The right value (from previous code) was 1/n
Or did I get a confusion about min() ?
min(0,1) == 0 min(4,1) == 1
Using max would protect against the division by 0 and the right value when multiple textures are used.
Any thought ?
|
|
210 | Geometric Primitives | Definite Bug | 3.70 RC3 | Low | Medium | UV mapping broken for parametric | Closed | |
3.70 RC4 |
Task Description
UV-mapped textures for parametrics are broken in POV-Ray 3.70 RC3, in cases where two (or more) parametrics overlap in a scene.
In the following scene, note how the texture per se is always taken properly from whichever parametric is in front, while the UV coordinates are erroneously taken always from the red parametric where both overlap, no matter whether it is in front or back.
camera {
location <0.0, 1.5, -3.0>
direction 1.5*z
right x*image_width/image_height
look_at 0
}
light_source { <-30, 30, -30> color rgb 1 }
#declare Param = parametric {
function { u*v*sin (15*v) },
function { v },
function { u*v*cos (15*v) }
0, 1
contained_by { box { -1,1 } }
accuracy 0.002
precompute 15 x,y,z
rotate 180*x
translate <0.3,0.5,0>
}
object {
Param
uv_mapping
texture {
pigment {
gradient x frequency 3
color_map {
[0 color red .5 ]
[1 color red 1 ]
}
}
}
}
object {
Param
uv_mapping
texture {
pigment {
gradient x frequency 7
color_map {
[0 color green .5 ]
[1 color green 1 ]
}
}
}
rotate y*180
}
POV-Ray 3.62 renders the scene properly.
As this bug has been found during code inspection, the uderlying cause has already been identified; I’m currently working on a fix.
|
|
213 | Parser/SDL | Definite Bug | 3.70 RC3 | Very Low | Medium | Missing check for ios failbit/badbit: endless loop whil ... | Closed | |
3.70 RC4 |
Task Description
Hello,
this bug report relates to this thread: http://news.povray.org/povray.beta-test/thread/%3Cweb.4e0064d9a3970d212b256d410%40news.povray.org%3E/
In /unix/unixoptions.cpp around line 817:
while ( !Stream.eof() )
{
// get and preprocess line
std::getline(Stream, line);
line = pre_process_conf_line(line);
++line_number;
// skip empty line
if(line.length() == 0)
continue;
[...]
}
`Stream.eof()` could never be true as well as `line.length()` always can be zero, leading to an endless loop. In my case, the problem occurred due to my ~/.povray/3.7/povray.conf being a directory instead of a file.
To fix the problem, one has to consolidate this loop by not only checking for eofbit, but also for failbit and badbit of `Stream`. The getline() method on a directory does not set the eofbit, but it sets fail and bad (test: http://codepad.org/RiZGo3ia). According to http://www.cplusplus.com/reference/iostream/ios/operatornot/ fail and bad can be checked for by `!Stream`. A simple `if (!Stream) break;` within the loop fixes the problem (patch file attached).
Are there more missing checks on iostreams like this in the code? :) They should definitely be fixed.
Furthermore, one could think about using the boost filesystem library to be able to distinguish files and directories to provide good error messages.
Hope that helps,
Jan-Philip Gehrcke
|
|
267 | Geometric Primitives | Definite Bug | 3.70 RC6 | Very Low | Medium | Bug in "sor" Primitive Leads to Random Black Artefacts ... | Closed | |
3.70 RC7 |
Task Description
Recently, I have been rendering an animation with POV-Ray 3.7 RC 6 using radiosity, photons and backside illumination. Many frames contained artefacts like in the attached image file. Trying to eliminate those artefacts I observed the following:
Rendering the same frame several times did not reproduce the artefacts or reproduced them differently. I.e., when I rendered a second (third, fourth, ...) time with +SF100 +EF100, the black space in the image was somewhere else or in some cases disappeared.
With radiosity turned off, no such artefacts have happened since, even in the scenes where they happened with radiosity turned on.
Turning off photons with radiosity still turned on did not remove the artefacts.
Rendering with one thread on one CPU core instead of two threads on two cores did not change anything except the rendering time.
Changing the radiosity settings I have not tried thoroughly, but at least raising or lowering count or error_bound does not seem to have any effect on this.
While POV-Ray was rendering, no other memory-intensive or CPU-intensive programs were running and POV-Ray itself did not report any error (just the usual warnings that some of the used features could change in future versions etc.). Render priotity was set to “high”.
|
|
9 | Parser/SDL | Feature Request | 3.70 beta 32 | Very Low | Low | Add support for tuning brightness of image-mapped sky s ... | Closed | |
3.70 RC4 |
Task Description
Adjusting the brightness of an image-mapped sky sphere, although not an uncommon task especially when using HDR light probes, currently is cumbersome at best, as it is not possible to specify a “finish { ambient ... }” statement.
To simplify tuning a sky sphere’s brightness, I suggest introducing a “brightness FLOAT” modifier (defaulting to 1.0) to either the sky_sphere block or (as a more versatile solution) the image_map statement.
|
|
19 | Texture/Material/Finish | Feature Request | 3.70 beta 32 | Very Low | Low | AOI pattern | Closed | |
3.70 beta 37 |
Task Description
Adding an AOI pattern is asked for fairly frequently.
|
|
36 | Documentation | Definite Bug | Not applicable | Very Low | Low | GuMax | Closed | |
|
Task Description
After a recent update on the POV-Wiki the GuMax skin doesn’t recognize MediaWiki:Common.css entries.
|
|
46 | Light source | Unimp. Feature/TODO | 3.70 beta 32 | Very Low | Low | area_illuminate in area lights is not taking fade_dista ... | Closed | |
3.70 RC4 |
Task Description
It seems that the new area_illuminate flag for area lights does not take into account fade_power and fade_distance. The illumination falloff is still being calculated from the center of the light_source.
Here’s some relevant code:
camera{
location<0,10,-10>
look_at 0
}
plane{y,0 pigment{rgb 1}}
light_source{
y*.1,100
area_light x*10, z*1, 8, 8
jitter
area_illumination
fade_power 2 fade_distance 1
}
|
|
49 | Texture/Material/Finish | Possible Bug | 3.70 beta 32 | Very Low | Low | number_of_waves default value not properly initialized | Closed | |
|
Task Description
When rendering a series of scenes (e.g. animation, or render queue in POV-Ray for Windows), number_of_waves is not properly reset to its default value between scenes, causing the parameter to default to the value set by the previous scene.
For instance, rendering the following scenes from a queue will cause “arches.pov” to be rendered differently the second time:
scenes\textures\finishes\arches.pov
scenes\textures\normals\normavg.pov
scenes\textures\finishes\arches.pov (again!)
|
|
52 | Parser/SDL | Possible Bug | 3.70 beta 32 | Very Low | Low | inside() function does not accept meshes despite valid ... | Closed | |
|
Task Description
The parser does not accept mesh objects (or CSG objects including a mesh object) as a parameter to the inside() built-in function, reporting error “Solid object identifier expected”, even if the mesh is “solidified” by specifying an inside_vector.
(see news://news.povray.org:119/4a983716@news.povray.org)
|
|
64 | Image format | Feature Request | Not applicable | Very Low | Low | Add "POV-Ray" metatags to images | Closed | |
3.70 beta 41 |
Task Description
Add metatags to output images identifying the file as having been created using POV-Ray.
|
|
67 | Texture/Material/Finish | Definite Bug | All | Very Low | Low | alpha channel in image map is ignored for shadows | Closed | |
3.70 beta 37 |
Task Description
In the following scene, the mesh object will always cast a fully-opaque shadow, even if the image has an alpha channel:
camera {
location <0.5, 1.0, -1.0>
look_at <0.5, 0.0, 0.5>
}
light_source { <0, 30, 0> color rgb 1 }
mesh {
triangle { <0,0,0>, <1,0,0>, <1,0,1> uv_vectors <0,0>, <1,0>, <1,1> }
triangle { <0,0,0>, <1,0,1>, <0,0,1> uv_vectors <0,0>, <1,1>, <0,1> }
texture { pigment { uv_mapping image_map {png "FOOBAR.png"} } }
}
plane { y, -0.1 pigment { color rgb 1 } }
The following modification to the texture will give the expected results:
texture { uv_mapping pigment { image_map {png "FOOBAR.png"} } }
The problem can be observed with both POV-Ray 3.7 (tested with beta.34), as well as 3.6 (tested with 3.6.2).
|
|
88 | Image format | Definite Bug | 3.70 beta 36 | Very Low | Low | File output code does not properly handle negative colo ... | Closed | |
3.70 beta 37 |
Task Description
File output code for virtually all file formats performs gamma correction on unclipped color values, which leads to issues when color values happen to be negative for some reason and gamma does not happen to be an integer value such as 1.0 or 2.0. As a consequence, subsequent steps (clipping and converting to integer) apparently produce compiler-dependent results. Compiled with Microsift or Intel compilers, POV-Ray seems to write zero brightness in such cases, while compiled with g++ 4.4 (and possibly other compilers) it seems to write full brightness instead.
(See thread news://news.povray.org:119/4ba819f6@news.povray.org for examples.)
The proper solution should be to apply gamma correction after clipping.
|
|
89 | Image format | Definite Bug | 3.70 beta 36 | Very Low | Low | PPM output garbled for bit depths other than 8 bits | Closed | |
3.70 beta 37 |
Task Description
When choosing PPM output with a bit depth other than 8 bits per color channel (e.g. +FP16), POV-Ray messes up the colors (see thread news://news.povray.org:119/4babb48f$1@news.povray.org)
|
|
97 | Other | Possible Bug | 3.70 beta 36 | Very Low | Low | Forward-slash pathnames not fully supported in Windows ... | Closed | |
3.70 beta 38 |
Task Description
The current Windows version of POV-Ray does not fully support forward slashes in pathnames; specifically, POV-Ray fails to recognize drive letters when followed by a forward slash, e.g. “C:/foo/bar.pov” or “C:/foo\bar.pov”, rejecting such names for e.g. Input_File_Name.
|
|
100 | Texture/Material/Finish | Definite Bug | 3.70 beta 36 | Very Low | Low | cutaway_textures | Closed | |
3.70 beta 37 |
Task Description
When using cutaway_textures the differenced part traces black. Simple scene file attached.
|
|
101 | Include files | Feature Request | 3.70 beta 36 | Very Low | Low | woodmaps.inc dependency | Closed | |
3.70 beta 38 |
Task Description
woodmaps.inc depends on colors.inc, more specifically the definition of the color “Clear” perhaps a #ifndef colors.inc belongs in woodmaps.inc or probably more correctly changing the call of “Clear” to rgbf 1
|
|
103 | Image format | Definite Bug | 3.70 beta 37 | Very Low | Low | JPEG output does not conform to baseline JFIF standard | Closed | |
3.70 beta 38 |
Task Description
POV-Ray 3.7-generated JPEG image output files do not conform to the JFIF standard. Most importantly, the files written do not use the standard YCbCr color model (they seem to use plain RGB instead), nor do they have a proper JFIF tag.
As a consequence, some software may be unable to read the generated JPEG files properly. In addition, it seems that POV-Ray mixes up the Red and Blue channels.
|
|
107 | Parser/SDL | Definite Bug | 3.70 beta 37 | Very Low | Low | Failed to parse INI file, over network | Closed | |
3.70 beta 38 |
Task Description
I can no longer run a Myfile.ini over a network, on a different computer.
Possiblely related to:
http://bugs.povray.org/task/97 FS#97 (Forward-slash pathnames not fully supported in Windows version)
- Cannot open INI file ‘\\STEPHEN-POVRAY\Bishop3d\Objects\Industrial_enclosure\Telco_enclosure_extra.ini’. Failed to start render: Failed to parse INI file
|
|
110 | Sample scenes | Definite Bug | 3.70 beta 37a | Very Low | Low | Sample Lathe Scenes no Longer work in 3.7 | Closed | |
3.70 beta 38 |
Task Description
The following line in the lathe1a.pov, lathe1b.pov, and lathe1c.pov appears to have an error in it.
<3.6.9>, <4, 1.1>, <3.4, 2>, <3, 1>, <2, 1>,
Although it works in version 3.6, only in 3.7 does a render time error ocurr.
Scene source should be adjusted to the following
<3.6, 0.9>, <4, 1.1>, <3.4, 2>, <3, 1>, <2, 1>,
|
|
111 | Parser/SDL | Definite Bug | 3.70 beta 37a | Very Low | Low | Remove_Bounds=off / -UR does not work properly | Closed | |
3.70 beta 38 |
Task Description
Automatic removal of user-specified bounding boxes cannot be disabled in current POV-Ray 3.7 betas; the Remove_Bounds ini file setting and the +/-UR command line option are silently ignored.
|
|
112 | Image format | Definite Bug | 3.70 beta 37a | Very Low | Low | OpenEXR alpha is only written when it shouldn't be | Closed | |
3.70 beta 38 |
Task Description
OpenEXR output currently writes an alpha channel when Output_Alpha=off (-UA), and does not write an alpha channel when Output_Alpha=on (+UA), i.e. doing it just the wrong way round.
|
|
114 | Preview | Definite Bug | 3.70 beta 37a | Very Low | Low | Mosaic Preview not displaying properly | Closed | |
|
Task Description
Mosaic preview display didn’t work as expected, given these command line options: +sp64 +ep16. The preview was solid colored instead of the coarse preview that you’d expect.
I’ve tested a fix to unix/disp_sdl.cpp from clipka and it appears to work.
|
|
116 | Texture/Material/Finish | Definite Bug | 3.70 beta 37a | Very Low | Low | assertion fails when using "filter all" with small-pale ... | Closed | |
3.70 beta 38 |
Task Description
When using “filter all VALUE” with an image_map using a 4-bit (16-color) paletted bmp image, debug builds of POV-Ray fail with an assertion.
According to code analysis, other paletted image formats with <256 palette entries are also likely to be affected; similar assertion fails can be expected when using the “filter INDEX, VALUE” feature on such files with an index exceeding the palette size. “transmit” shows the same flaws.
|
|
122 | Parser/SDL | Feature Request | 3.70 beta 37a | Very Low | Low | #ELSEIF statement | Closed | |
3.70 beta 38 |
Task Description
Request an #ELSEIF statement in POV SDL.
|
|
137 | Include files | Feature Request | 3.70 beta 37a | Very Low | Low | atand function | Closed | |
3.70 beta 38 |
Task Description
There already exist atan, atan2 and atan2d functions, why not atand?
|
|
156 | Other | Definite Bug | 3.70 beta 38 | Very Low | Low | Crash when reading from DF3 file with no data, using in ... | Closed | |
3.70 RC4 |
Task Description
A df3 file is written, with header 00 00 00 00 00 00 and no data (hypothetically valid df3 file). This file is used as density file for media, using interpolation. This causes a crash once Pov-Ray starts rendering the pixels that contain media. All pixels rendered before that render fine. Using no interpolation does not cause a crash.
Sample Scene: #fopen out “random.df3” write #write (out, uint16be <0,0,0>) #fclose out
box{0,1 pigment{rgbt 1} hollow interior{media{ density{density_file df3 “random.df3” interpolate 1}}}} // interpolate 2 also crashes, interpolate 0 does not.
System: Win7 x64, 3.7 Beta 38
|
|
158 | Other | Definite Bug | 3.70 beta 38 | Very Low | Low | Antialias Gamma reporting error | Closed | |
3.70 beta 39 |
Task Description
value is erroneously clipped to the range 0..1 before being displayed
|
|
165 | Photons | Definite Bug | 3.6 | Very Low | Low | photon problem: image of projected image_map is clipped ... | Closed | |
3.70 RC4 |
Task Description
Hi,
I have a problem with photons. The following stripped down code simulates a slide projector:
#include "colors.inc"
global_settings {
#if (1) // switch photons on/off
photons { count 1000000 }
#end
}
camera { location <0, 0, 200> sky<0,1,0> look_at <0,200,-200> angle 90 }
// projection screen
plane { z, -200 texture { pigment { White } finish{ diffuse 1 ambient 0.1} } }
// slide
polygon {
5, <0,0,0>, <1,0,0>,<1,1,0>,<0,1,0>,<0,0,0>
pigment { image_map {jpeg "s7_0.9_320.jpg" interpolate 2 filter all 1.0 } }
translate <-0.5, 0.2, -0.3>
photons { target refraction on reflection off collect off }
}
// projector lamp
light_source { <0, 0, 0> color <1,1,1> }
——————————————-
A point light source projects through a image_map onto a screen.
Without photons the projected image is ok: http://img838.imageshack.us/i/test4woph.png/
With photons the left and right bottom corners of the image will be clipped: http://img101.imageshack.us/i/test4wph.png/
The size of clipped corners depends on the y-offset in the translate command.
The povray Version is: Persistence of Vision™ Ray Tracer Version 3.6.1 (Debian (x86_64-linux-gnu-g+ + 4.3.3 @ x86_64-pc-linux-gnu)) (the 3.7 beta has the same problem)
I posted this question in the general news group and got an answer by Christian Froeschlin, who could reproduce the problem and suggested as workaround to divide the slide into small stripes
http://news.povray.org/povray.general/thread/%3Cweb.4c972bdffcc128eac947b6de0%40news.povray.org%3E/
This works, but doesn’t explain the problem.
Does anyone have an idea, whats wrong?
Many thanks, Corvin
|
|
166 | Texture/Material/Finish | Definite Bug | 3.70 beta 38 | Very Low | Low | quick_color does not work | Closed | |
|
Task Description
the quick_color feature doesn’t work when +qN or Quality=N is set to 5 or below
|
|
169 | Parser/SDL | Possible Bug | 3.6 | Very Low | Low | Error in Linux version using #while loop and SweepSplin ... | Closed | |
3.70 RC4 |
Task Description
I used POV-Ray to make an animation of my Morgan driving around a slalom course. (If you are curious, you can see the output on youtube under my user name, nojonushi.) To make the long swooping fenders I used Mike William’s SweepSpline macro.
The code rendered the 1189 frames in one go with no problems. But the wheels in that animation do not rotate, so I then added code to rotate the wheels. In the calculations I added I used a #while loop to step through the spline containing the route coordinates and total up the distance traveled. Running POV-Ray on this file produced a random number of images and then issued an error, e.g.
0:00:00 Processing Frame 456 of 1189
0:00:00 Parsing
File: mogslalom.pov Line: 1918 Parse Warning: Patch objects not allowed in intersection. File: mogslalom.pov Line: 2988 File Context (5 lines):
object {
SweepSpline(TFSpline,
Parse Error: Identifier expected, incomplete function call or spline call found instead.
Most of the parameters for the macro are missing. But this is after successfully generating, in this case, 455 images.
I have attached a text file with set-up and sample code that has given the error on two different machines.
|
|
184 | Radiosity | Definite Bug | 3.70 RC1 | Very Low | Low | Too many pretrace steps when pretrace_start < pretrace_ ... | Closed | |
3.70 RC2 |
Task Description
If pretrace_start is set below pretrace_end, POV-Ray will run a high number of pretrace steps (without changing pretrace resolution).
|
|
186 | Geometric Primitives | Definite Bug | 3.70 RC1 | Very Low | Low | numeric precision problem with polygon start/end points | Closed | |
3.70 RC2 |
Task Description
polygon objects comprised of multiple “sub-polygons” don’t work properly if start/end points of sub-polygons do not exactly match, as can be demonstrated by the following code:
#default { texture { pigment { rgb 1 } finish { ambient 1.0} } }
camera {
orthographic
up 3.5*y
right 3.5*x*image_width/image_height
location <0,0,-4>
look_at <0,0,0>
}
polygon { 8,
// outer triangle
0.70 * < cos( 0 *pi/180),sin( 0 *pi/180),0>
0.70 * < cos(120 *pi/180),sin(120 *pi/180),0>
0.70 * < cos(240 *pi/180),sin(240 *pi/180),0>
0.70 * < cos(360 *pi/180),sin(360 *pi/180),0>
// inner triangle
0.35 * < cos( 0 *pi/180),sin( 0 *pi/180),0>
0.35 * < cos(120 *pi/180),sin(120 *pi/180),0>
0.35 * < cos(240 *pi/180),sin(240 *pi/180),0>
0.35 * < cos(360 *pi/180),sin(360 *pi/180),0>
}
Note that the end points /should/ be identical. There are however some minor rounding differences, which mess up polygon computations. Compare with the following code, which leads to the desired results:
polygon { 8,
// outer triangle
0.70 * < cos( 0 *pi/180),sin( 0 *pi/180),0>
0.70 * < cos(120 *pi/180),sin(120 *pi/180),0>
0.70 * < cos(240 *pi/180),sin(240 *pi/180),0>
0.70 * < cos( 0 *pi/180),sin( 0 *pi/180),0>
// inner triangle
0.35 * < cos( 0 *pi/180),sin( 0 *pi/180),0>
0.35 * < cos(120 *pi/180),sin(120 *pi/180),0>
0.35 * < cos(240 *pi/180),sin(240 *pi/180),0>
0.35 * < cos( 0 *pi/180),sin( 0 *pi/180),0>
}
Code inspection shows that the polygon insideness testing code tests for precise equality of the points, whereas the general policy of POV-Ray is to accept slight rounding differences.
|
|
187 | Frontend | Feature Request | 3.70 beta 41 | Very Low | Low | POV-Ray 3.70 ignores SIGTSTP signal, noisy on SIGWINCH ... | Closed | |
3.70 RC2 |
Task Description
When POV-Ray 3.70 is run on a terminal, on an unix shell, and the user hits ctrl-Z to suspend (stop) POV-Ray, rather than stopping as expected, POV-Ray just reports that it did receive the signal, as if to laugh at the user “I’m not obeying your puny stop attempts”. It
The default action (as happens if the SIGTSTP signal is not trapped) would be much better, and is usually safe also in multithread programs. It takes actual effort to _ignore_ the TSTP signal (namely, to trap that signal), so the current behavior is definitely a dysfeature, probably an oversight by whoever programmed the signal handler.
Also, when the terminal window is resized, POV-Ray needlessly reports that it received a signal number so-and-so (the number of SIGWINCH), adding irrelevant noise to its terminal output. Both signals (SIGTSTP and SIGWINCH) should simply be excluded from the signal trapping mask. I guess there are also other signals that are needlessly captured. It would be better to capture only those signals that an action is needed for.
|
|
190 | Photons | Feature Request | 3.70 RC1 | Very Low | Low | photon message reporting | Closed | |
|
Task Description
couple of observations:
if no photons are gathered (hey it happens ... my typo) when attempting to save a photon map the warning message just indicates that it couldn’t save the map, maybe the message could be enhanced to say something like: No photons were gathered so no map information was saved. At first I thought something had changed in my I/O restrictions (I’m writing to an image directory not current or work directory)
when reading a previously saved photon map there is no indication that it was read in other than the end stats showing a small amount of photon time. I don’t recall but didn’t v3.6 indicate that the a previously saved map was being used? Just for the heck of it I moved the map file aside and it did prove to me that it was indeed being input. Some sort of message at the time the file is read in might be helpful.
|
|
191 | Texture/Material/Finish | Definite Bug | 3.70 RC1 | Very Low | Low | Using interpolated image_maps in functions results in p ... | Closed | |
3.70 RC4 |
Task Description
Using interpolated image_maps in functions results in pixel-sized dot-artifacts when using the functions back into pigments.
This problem doesn’t shows using the same code on POV-Ray 3.6.
I qualified it as “low severity” because is not going to happen to most users: it will show only when using some advances techniques, for example when you want to decompose an image_map into the RGB components, perform operations, and mixing them back with an averaged pigment (example attached).
|
|
197 | Other | Definite Bug | 3.70 RC3 | Very Low | Low | -J by itself does nothing | Closed | |
3.70 RC4 |
Task Description
The documentation says:
“-J Sets aa-jitter off”
However, it seems to have no effect. -J0 will turn off jittering.
|
|
200 | Geometric Primitives | Definite Bug | 3.70 RC3 | Very Low | Low | Calibri TrueType font garbled | Closed | |
3.70 RC4 |
Task Description
original post on povray.beta-test:
POV-Ray 3.7.0.RC3 on Slackware 13.0 x86_64.
I pointed povray to use the calibri.ttf font over on my Windows 7 partition.
The result is garbled - strange letters with accents appear instead of the
expected text. (KDE's kfontview opens calibri.ttf OK, with nothing strange).
Pointing povray to use other fonts of Win7, e.g. comic.ttf and arial.ttf, was
OK.
I solved the problem by pushing calibri.ttf through fontforge and resaving it
as mycalibri.ttf.
Cheers,
Peter
Confirmed with development version on Windows XP x64.
Possibly a similar problem as FS#162 .
|
|
201 | Parser/SDL | Unimp. Feature/TODO | 3.70 RC3 | Very Low | Low | repeated re-declaring of functions causes runaway memor ... | Closed | |
3.70 RC4 |
Task Description
original posting from povray.beta-test:
I get this error message:
"Parse Error: bad allocation Render failed"
- after the code below has been running for about 3 seconds.
// ===== 1 ======= 2 ======= 3 ======= 4 ======= 5 ======= 6 ======= 7
#version 3.7;
#while (true)
#local Fn = function { transform { translate <0, 0, 0> } }
#undef Fn
#end // while
// ===== 1 ======= 2 ======= 3 ======= 4 ======= 5 ======= 6 ======= 7
I'm using POV-Ray for Windows - Version 3.7.0.RC3.msvc9-sse2.win32
The operating system is Windows XP.
With the code above, the error messages has so far appeared every time
right after 3318K tokens have been parsed. But with other versions of
my code, the error message does not always show up. (Sometimes the
render finishes and sometimes the parsing stops at different "times".)
[...]
Other users report no error message, but memory consumption rising to about 1.2 GB.
|
|
203 | Radiosity | Definite Bug | 3.70 RC3 | Very Low | Low | Radiosity artifacts at low error_bound | Closed | |
3.70 RC4 |
Task Description
A scene of a hollow sphere viewed from the inside:
difference {
sphere { 0, 100 }
sphere { 0, 99 }
pigment { rgb 1 }
finish { ambient .4 }
}
global_settings {
radiosity {
error_bound .1
}
}
Rendering produces dark splotches at the centers of the pretrace blocks, as shown in the attached image. Blocks rendered earlier have darker splotches. They also differ in shape between renders even with +HR (but not with +WT1).
Turning “always_sample” on, changing “pretrace_end” to 0.01, or increasing “count” past 1000 makes them imperceptibly faint (they can still be seen by increasing image contrast).
This is possibly a bug, as 3.6 doesn’t produce these artifacts regardless of additional settings.
povray.beta-test thread
|