The ability to specify an exact name for output images during animations would be great. As it is, POV-Ray appends a numerical designation to each image (e.g. image001.png, image002.png, etc. Overriding this behavior would allow certain tasks to be accomplished without cluttering the hard drive. For instance, an image could be rendered over and over again. Certain things like cellular automata, ripple tank simulations and feedback fractals could be performed without the resulting long list of images in a given directory.

The command line option could be in the form of +oefile/+Output_File_Name_Exact=file or some such.

source/png_pov.cpp included in povray-3.6.1 contains calls to an internal function of libpng (png_write_finish_row) which was removed from the public interface quite a while ago, so linking fails.

Also, in the 1.4 releases of libpng, the info_struct “trans” member was renamed to trans_alpha. This causes a compilation error in the same file.

A suggestion for the solution:
a) remove the png_write_finish_row prototype and function call
b) add something like:
#if PNG_LIBPNG_VER < 10400
#define trans_alpha trans
#endif
and change
cmap[index].Transmit = 255 - r_info_ptr→trans[index];
to
cmap[index].Transmit = 255 - r_info_ptr→trans_alpha[index];
(two occurrences).

Macros are finicky about how you type your code. What works outside macros sometimes fails inside them. For more information see the threads:

“Problems with macro (3.6)”, in p.a-u, 06-09-10
“Bad operands”, in p.g, 05-20-10

Still not sure *what* exactly the problem was, but one of my workarounds ended up working.

In POV 3.6 you could set the Statistic_File option to a custom file and folder path. In the beta I get an “Cannot open file” error. Has the feature been intentionally removed or did it become broken?

The documentation entries for shapes.inc, shapes_old.inc, shapes2.inc, shapesq.inc, etc. should have thumbnails next to the object descriptions.

In the tray icon, I’d like to see the render progress indicated somehow icon itself. Either a set of numbers (percents), or a change in color of the icon (e.g. from top to bottom). Something like the attached images.

Windows allows you to associate programs with file extensions using the “Open with” file manager right-click menu extension.

I’m running Windows 7 64bit, and installed the 64 bit versions of 3.6.2 and the beta appropriately.

A couple of problems that I haven’t tested very thoroughly:

1. If you have both POV 3.6.2 and the beta installed at the same time, you can no longer using this dialog change the association to the beta once it has been created for 3.6.2. There’s no error or anything; it just opens the file inside 3.6.2 instead. Maybe because both versions appear as “POV-Ray for Windows” to this dialog? Would adding the version number to the name fix things? Anything I can do on my end of things to resolve this?

2. In POV-Ray 3.6.2, I can use this dialog to open *.inc, *.txt and other files in POV-Ray, but only if POV-Ray isn’t already running. If POV-Ray is already running I get an “Only /EDIT and /RENDER may be passed to previous instance” error. Files with the *.pov extension open properly regardless, without any error. I am unable to test this in the beta at the moment due to the first problem unfortunately. Could someone please test this with the beta and confirm whether the behavior also exists?

3. With the POV-Ray 3.7 beta, entering the following command in the command prompt results in the same error:

   "C:\Program Files\POV-Ray for Windows v3.7\bin\pvengine64.exe" "D:\Working\Povray\GearHead\LoadingScreen\btr_maanji.pov"

If I change it to the following it works however:

   "C:\Program Files\POV-Ray for Windows v3.7\bin\pvengine64.exe" /EDIT "D:\Working\Povray\GearHead\LoadingScreen\btr_maanji.pov"

Is this error/behavior really necessary? Would it be OK to instead change the behavior when the /EDIT flag is omitted in the
command-line such that the file is opened in the editor by default, without throwing an error?

Currently, cameras placed inside object or union statements will halt the render with an error. Take for instance the following case:

#local temp_camera_1 = camera
{
  orthographic
  location  z*-12
  direction  z
  up    y
  right    x*image_width/image_height
  scale    32
}

#local temp_light_1 = light_source
{
  0
  color rgb 1
  translate <-30, 30, -30>
}

#local temp_light_2 = light_source
{
  0
  color rgb 1
  translate <-30, 30, +30>
}

union
{
  object {temp_light_1}
  object {temp_light_2}
//  camera {temp_camera_1}  // doesn't work!!!
}

//object {temp_camera_1}  // doesn't work!!!
camera {temp_camera_1}  // works!!!

Changing this behavior would make it possible to more easily apply transformations to scene objects and the camera at the same time in situations where the scene’s frame of reference is in motion relative to the rest of the scene, for instance in animations.

clipka anonymous@anonymous.org wrote:
> Am 29.06.2010 04:27, schrieb jberry02:
>
> > First, note that this is the Windows version.
> > Second the issue is not with opening the ini file, but with opening the scene
> > file from within the ini file.
> >
> > I have a scene.ini file, that has a line:
> >
> > Input_File_Name=scene
> >
> > under POV-Ray 3.5 *and* POV-Ray 3.6, the scene defined in the file scene.pov is
> > rendered properly using the parameters specified in the scene.ini file. The ini
> > file is opened from the POV-Ray GUI, and run using the “Run” button.
> >
> > under POV-Ray 3.7, I get an error - I originally thought that it was simply not
> > looking for scene.pov (i.e., it wasn’t adding the .pov extension when trying to
> > open the scene file), but looking closer the error is *actually*:
> >
> > Input file ‘C:\[...]\scene’ not found; cannot determine I/O permission for
> > write.
> > Failed to start render: Cannot open file.
> >
> > In other words, it appears that the problem is that it isn’t adding the default
> > ..pov extension when it is trying to do the I/O permission check. I do not have
> > any special I/O permisssions configured for any version of POV-Ray (I get the
> > pop-up dialogs), and this is a change in behavior from 3.6 to the current beta
> > of 3.7. The scene.pov file is not in any of the POV-Ray directories - it is in
> > a separate tree where I keep my scene files.
>
> Having looked at it in a debugger, I can confirm that there is a
> problem, and that you don’t seem to be far off the mark:
>
> The error occurs when POV-Ray tries to determine the I/O permissions for
> the /output/ file. If that isn’t explicitly specified with a path,
> POV-Ray will try to get the path from the input file; however, it will
> take the unprocessed parameter (in the sample case “scene”) rather than
> the file name POV-Ray makes of it (”scene.pov”), and then attempts to
> get the full /long/ path name of the file (remember the good old 8.3
> filenames for compatibility with 16-bit programs?), which only works
> when the file exists.
>
> Would you mind submitting a bug report to <http://bugs.povray.org>?

Installation script (from sources) when run with a classical “sudo make install” would create povray.ini & povray.conf in $HOME/.povray/3.7 (so far so fine) with the owner as root and the permission to readonly for the real user.

Same goes for the owner of the 3.7 directories tree : .povray & .povray/3.7 are created with root owner, despite being in $HOME of the performing user.

Please fix ?

Compiled on linux (revision #5066),
./configure COMPILED_BY=”###” –disable-io-restrictions

the command: povray –benchmark

is failing:
Failed to parse INI file

povray –version

I/O restrictions:          disabled
X Window display:          enabled (using SDL)
Supported image formats:   gif tga iff ppm pgm hdr png jpeg tiff openexr
Unsupported image formats: -

Build architecture:  x86_64-unknown-linux-gnu
Built/Optimized for: x86_64-unknown-linux-gnu (using -march=native)
Compiler vendor:     gnu
Compiler version:    g++ 4.4.3
Compiler flags:      -pipe -Wno-multichar -Wno-write-strings -fno-enforce-eh-specs -s -O3 -ffast-math -march=native -pthread 

A df3 file is written, with header 00 00 00 00 00 00 and no data (hypothetically valid df3 file).
This file is used as density file for media, using interpolation. This causes a crash once Pov-Ray starts rendering the pixels that contain media.
All pixels rendered before that render fine. Using no interpolation does not cause a crash.

Sample Scene:
#fopen out “random.df3” write
#write (out, uint16be <0,0,0>)
#fclose out

box{0,1 pigment{rgbt 1} hollow interior{media{
density{density_file df3 “random.df3” interpolate 1}}}} // interpolate 2 also crashes, interpolate 0 does not.

System: Win7 x64, 3.7 Beta 38

Include file golds.inc still provides warnings when parsed, a shame for a standard include file.
(colors.inc is ok, I did not test the other includes)

File '/usr/local/share/povray-3.7/include/golds.inc' line 118: Parse Warning:
 Expected pure RGB color expression, unexpected filter and transmit components
 will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 119: Parse Warning:
 Expected pure RGB color expression, unexpected filter and transmit components
 will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 129: Parse Warning:
 Expected pure RGB color expression, unexpected filter and transmit components
 will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 130: Parse Warning:
 Expected pure RGB color expression, unexpected filter and transmit components
 will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 140: Parse Warning:
 Expected pure RGB color expression, unexpected filter and transmit components
 will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 141: Parse Warning:
 Expected pure RGB color expression, unexpected filter and transmit components
 will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 151: Parse Warning:
 Expected pure RGB color expression, unexpected filter and transmit components
 will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 152: Parse Warning:
 Expected pure RGB color expression, unexpected filter and transmit components
 will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 162: Parse Warning:
 Expected pure RGB color expression, unexpected filter and transmit components
 will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 163: Parse Warning:
 Expected pure RGB color expression, unexpected filter and transmit components
 will have no effect.

value is erroneously clipped to the range 0..1 before being displayed

Test bug for checking features of flyspray.

...for instance nVidia’s CUDA architecture, discussed here and other places.

General consensus is that it’s not worth the effort if only a partial set of POV-Ray’s features are possible.

There is a confirmed bug when writing jpg file format with the current linux build (beta39). when specifying +fj output format the following error occurs:

JPEG parameter struct mismatch: library thinks size is 372, caller
expects 376
JPEG parameter struct mismatch: library thinks size is 372, caller
expects 376
Render failed

this has been confirmed on ubuntu 10.4 and openSuSe 11.2 (assuming 32 bit version) as openSuSe 11.2 64-bit reports no problem

there has been a proposed fix to ~smp/source/base/image/jpeg.cpp that appears to work, however it requires some additional work to make it a platform (linux) and compiler (gcc) specific fix.

The text object isn’t working with /usr/share/fonts/truetype/freefont/FreeSans.ttf. Used to work - taken from an old .pov file of mine.

Rebuilt from
http://www.povray.org/redirect/www.povray.org/ftp/pub/povray/Official/Unix/povray-3.6.tar.bz2

$ povray +ifonttest.pov +ofonttest.png

Persistence of Vision™ Ray Tracer Version 3.6.1 (g++ 4.4.3 @
x86_64-unknown-linux-gnu)
This is an unofficial version compiled by:
darxus [at] chaosreignscom

.....

File: fonttest.pov Line: 8
Parse Warning: Character 101 (0×65) not found in /usr/share/fonts/truetype/freefont/FreeSans.ttf
File: fonttest.pov Line: 8
Parse Warning: Character 115 (0×73) not found in /usr/share/fonts/truetype/freefont/FreeSans.ttf

Verification that the problem is not in the .ttf file, this works (imagemagick):

convert -background lightblue -fill blue -pointsize 48 -font
/usr/share/fonts/truetype/freefont/FreeSans.ttf label:test fonttest.png

Problem verified when compiled from source on Ubuntu Lucid. Also exists in Ubuntu binaries from Lucid and Hardy.

no warning is issued when an object/primitive has no pigment type given

I’d like to request the ability to create a date/time stamp on output images so that new renders don’t always overwrite old ones. Thanks.

Hi,

I have a problem with photons. The following stripped down code simulates a
slide projector:

#include "colors.inc"

global_settings {
  #if (1)   // switch photons on/off
    photons { count 1000000 }
  #end
}

camera { location <0, 0, 200> sky<0,1,0> look_at <0,200,-200> angle 90 }

// projection screen
plane { z, -200 texture { pigment { White } finish{ diffuse 1 ambient 0.1} } }

// slide
polygon {
  5, <0,0,0>, <1,0,0>,<1,1,0>,<0,1,0>,<0,0,0>
  pigment { image_map {jpeg "s7_0.9_320.jpg" interpolate 2 filter all 1.0 } }
  translate <-0.5, 0.2, -0.3>
  photons { target refraction on reflection off collect off }
}

// projector lamp
light_source { <0, 0, 0>  color <1,1,1> }

——————————————-

A point light source projects through a image_map onto a screen.

Without photons the projected image is ok:
http://img838.imageshack.us/i/test4woph.png/

With photons the left and right bottom corners of the image will be clipped:
http://img101.imageshack.us/i/test4wph.png/

The size of clipped corners depends on the y-offset in the translate command.

The povray Version is:
Persistence of Vision™ Ray Tracer Version 3.6.1 (Debian (x86_64-linux-gnu-g+
+ 4.3.3 @ x86_64-pc-linux-gnu))
(the 3.7 beta has the same problem)

I posted this question in the general news group and got an answer by Christian Froeschlin,
who could reproduce the problem and suggested as workaround to divide the slide into small stripes

http://news.povray.org/povray.general/thread/%3Cweb.4c972bdffcc128eac947b6de0%40news.povray.org%3E/

This works, but doesn’t explain the problem.

Does anyone have an idea, whats wrong?

Many thanks,
Corvin

the quick_color feature doesn’t work when +qN or Quality=N is set to 5 or below

From post in povray.general (circa 29 september 2010: “Maximum Resolution of Renders?”)

The ultimate goal would be a 41000×41000 image. However each time I have attempted to render that Pov-Ray has crashed on
me. Even when using a single, simple test object (a plain white sphere that
should use a single pixel). So I think this is running into a program limitation
at present.

It won’t be for the faint hearted: a 30500 x 30500 does still produces the bug, but you’d better have 24 GB of true ram to test it.
(it’s a render of a few “real” minutes if you do not swap, for any very quick scene (a 305 x 305 in 0.117s moved to 220s for 30500×30500 on my system when corrected))

With core-dumped enable, the issue is pointed in the creator of PixelContainer.
The problem is due to the resize() parameter: despite the parameter being a size_t (8 bytes long on 64bits), the computation ( h * w * 5 ) use unsigned int for h & w (and signed int for 5).

As a consequence, the value of resize is computed as a signed int... havoc might happen when the signed bit (#31) is propagated to the #63 to #32 of size_t... vector does not enjoy a negative value for resize (and destroy itself: no iterator on coming soon call! hence the crash when the values in the vector are to be initialised)

30500²: (in hex)

1 15 3C 71 50 floats
4 54 F1 C5 40 bytes

Basic solution: promote the 5 to an unsigned long, forcing the computation to happen on unsigned long, avoiding promotion of silly sign-bit, and keeping the resize’s value as a good number.

aka: resize( w * h * 5) becomes resize ( w * h * 5ul )

This solution has been tested and seems fine (it’s just that in base/image/image.cpp, there is a lot of resize()!).
For all resize(), the “ul” must be added. (and that means also that resize( w * h ) must be rewritten as ( w * h * 1ul ). )

[Original Title: “texture_map interpolation does not work correctly for some patterns”]

The below test scene should yield identical textures
T_STRAND1 and T_STRAND2 but this is not the case. Reported
and verified in

http://news.povray.org/povray.general/thread/%3C4cbd804b%241%40news.povray.org%3E/

The problem seems to affect bozo, bumps, dents, granite, spotted,
and maybe wrinkles. The problem was reported earlier in

http://news.povray.org/povray.beta-test/thread/%3C48112367%241%40news.povray.org%3E

with a comment that 3.6 gives the expected results

#declare C_STRAND = color rgb 1;

#declare C_CLEAR  = color rgb 0;

#declare T_STRAND = texture
{
  pigment {color C_STRAND}
}

#declare T_CLEAR = texture
{
  pigment {color C_CLEAR}
}

#declare T_STRANDS1 = texture
{
  pigment
  {
    granite scale 2 color_map
    {
      [0.0 color C_STRAND]
      [0.5 color C_CLEAR]
      [1.0 color C_CLEAR]
    }
  }
}

#declare T_STRANDS2 = texture
{
  granite scale 2 texture_map
  {
    [0.0 T_STRAND]
    [0.5 T_CLEAR]
    [1.0 T_CLEAR]
  }
}

plane
{
  z, 10
  texture {T_STRANDS1}
  //texture {T_STRANDS2}
} 

I used POV-Ray to make an animation of my Morgan driving around a slalom course. (If you are curious, you can see the output on youtube under my user name, nojonushi.) To make the long swooping fenders I used Mike William’s SweepSpline macro.

The code rendered the 1189 frames in one go with no problems. But the wheels in that animation do not rotate, so I then added code to rotate the wheels. In the calculations I added I used a #while loop to step through the spline containing the route coordinates and total up the distance traveled. Running POV-Ray on this file produced a random number of images and then issued an error, e.g.

 0:00:00 Processing Frame 456 of 1189
 0:00:00 Parsing

File: mogslalom.pov Line: 1918
Parse Warning: Patch objects not allowed in intersection.
File: mogslalom.pov Line: 2988
File Context (5 lines):

                object {
                SweepSpline(TFSpline,

Parse Error: Identifier expected, incomplete function call or spline call found instead.

Most of the parameters for the macro are missing. But this is after successfully generating, in this case, 455 images.

I have attached a text file with set-up and sample code that has given the error on two different machines.

Currently, output image is buffered using POV-Ray’s RGBFT color model and floating point values, leading to a memory consumption of 20 bit per pixel. This is an unproportionally large memory footprint, given that the only further processing performed on the buffered data is conversion of the data to the desired output file format, which will typically use only 3 bytes per pixel (at most 12 bit per pixel).

The situation can be improved by choosing the output image buffer container based on the desired output file format and parameters. To this end, the following code changes should be made:

• Bundle image file format handler code into classes (typically one per file format)
• Include a method to determine the best data container type for the image buffer
• Instantiate the desired image file format handler object prior to rendering, querying the handler object for an image buffer

In addition to picking a suitable image data container from the already existing palette, careful design might also allow to use custom containers to directly pass the data to a library (in case the library provides its own buffering anyway), or write it directly to the output file (e.g. when writing image data to stdout). To make this compatible with multithreaded rendering, the following changes would have to be made:

• Add code to detect when a row of SMP blocks has been finished, and call a certain method on the image handler object
• Design the custom containers in such a way that they can buffer any number of unfinished SMP block rows as needed

Bounding box computation for CSG intersection appears to be broken when one member is an arbitrarily transformed plane.

// +W640 +H480 +MB1

#include "transforms.inc"

camera {
  location  <-0.2, 0.5, -4.0>
  direction 1.5*z
  right     x*image_width/image_height
  look_at   <0.0, 0.0,  0.0>
}

sky_sphere {
  pigment {
    gradient y
    color_map {
      [0.0 rgb <0.6,0.7,1.0>]
      [0.7 rgb <0.0,0.1,0.8>]
    }
  }
}

light_source {
  <0, 0, 0>            // light's position (translated below)
  color rgb <1, 1, 1>  // light's color
  translate <-30, 30, -30>
}

plane {
  y, -1
  pigment { color rgb <0.7,0.5,0.3> }
}

intersection {
  sphere {
    0.0, 1 }
  plane { -x, 0 transform { Shear_Trans(x,y+x*0.3,z) } }
  texture {
    pigment {
      radial
      frequency 8
      color_map {
        [0.00 color rgb <1.0,0.4,0.2> ]
        [0.33 color rgb <0.2,0.4,1.0> ]
        [0.66 color rgb <0.4,1.0,0.2> ]
        [1.00 color rgb <1.0,0.4,0.2> ]
      }
    }
    finish{
      specular 0.6
    }
  }
  rotate -y*5
}

In some cases it may be desirable to run POV-Ray from a batch file, without causing it to “steal the focus”.

I suggest making this dependant on whether POV-Ray is run with the /EXIT parameter.

I/O Restriction defaults are not being properly set on a fresh install of POVWIN.

See this thread for more information.

Tested with beta 40. Also affect version 3.6.1 as reported in the discution group.

When using radiosity and emissive media. Any object, or part of, that is inside the media container is not affected by the illumination comming from the media.

When using scattering media, the light scattered by the media also don’t affect objects that are inside it’s container.

http://news.povray.org/povray.newusers/thread/%3C4cf8fe22%241%40news.povray.org%3E/

At the moment in the Poly Object the maximum power is 15. The mathematics for converting the three parametric equations for x, y and z into a formula for the Poly Object require that the equations are squared several times given max-powers of 4, 8 and even 16. I’ve one eqaution that needs power 16. At the moment this is just one power short. Please raise this to 16. That’s all I ask for.

unixoptions.cpp has a getenv(”HOME”) that does an assignment without checking to see if getenv returns NULL.

This causes an immediate and unceremonious segfault in those situations where $HOME is not set such as in the case where povray is launched by a daemon.

Best solution might be to set the home to /tmp and print a warning message about $HOME not being set.

FileBackedPixelContainer uses a FILE* to manage the backing store and under Linux/Unix defines fseek64 to be a kind of incantation of lseek64.

Since fseek64 and fseek64 have return values that are logical opposites this causes an exception to be thrown.

Moreover since the buffer size on a FILE is quite a bit smaller than a line of pixels (in terms of bytes), mostly what’s being done in this function is a lot of sloshing of bytes that don’t do much... which is to say that the intended caching mechanism is getting a very low hit rate now that povray is working in 32×32 pixel per-thread chunks.

The cache miss problem and the volume of bytes read/written grows exponentially as the size of the image grows.

Attached is a replacement function that seems to be working well and should produce a performance increase even under Windows. I originally went with simply fixing the fseek/lseek problem but saw a 10% decrease in render time on 2048×1024-sized images when I made the cache target smaller.

If pretrace_start is set below pretrace_end, POV-Ray will run a high number of pretrace steps (without changing pretrace resolution).

‘povray -H10 -W20 myscene.pov’ will generate a file with a picture 10 pixels high and 20 pixels wide, BUT in the message pane it displays

Image resolution.....20 by 10 (rows 1 to 20, columns 1 to 10)

instead of

Image resolution.....20 by 10 (rows 1 to 10, columns 1 to 20)

or

Image resolution.....20 by 10 (columns 1 to 20, rows 1 to 10) 

polygon objects comprised of multiple “sub-polygons” don’t work properly if start/end points of sub-polygons do not exactly match, as can be demonstrated by the following code:

#default { texture { pigment { rgb 1 } finish { ambient 1.0} } }

camera {
  orthographic
  up 3.5*y
  right 3.5*x*image_width/image_height
  location  <0,0,-4>
  look_at   <0,0,0>
}

polygon { 8,
  // outer triangle
  0.70 * < cos(  0 *pi/180),sin(  0 *pi/180),0>
  0.70 * < cos(120 *pi/180),sin(120 *pi/180),0>
  0.70 * < cos(240 *pi/180),sin(240 *pi/180),0>
  0.70 * < cos(360 *pi/180),sin(360 *pi/180),0>

  // inner triangle
  0.35 * < cos(  0 *pi/180),sin(  0 *pi/180),0>
  0.35 * < cos(120 *pi/180),sin(120 *pi/180),0>
  0.35 * < cos(240 *pi/180),sin(240 *pi/180),0>
  0.35 * < cos(360 *pi/180),sin(360 *pi/180),0>
}

Note that the end points /should/ be identical. There are however some minor rounding differences, which mess up polygon computations. Compare with the following code, which leads to the desired results:

polygon { 8,
  // outer triangle
  0.70 * < cos(  0 *pi/180),sin(  0 *pi/180),0>
  0.70 * < cos(120 *pi/180),sin(120 *pi/180),0>
  0.70 * < cos(240 *pi/180),sin(240 *pi/180),0>
  0.70 * < cos(  0 *pi/180),sin(  0 *pi/180),0>

  // inner triangle
  0.35 * < cos(  0 *pi/180),sin(  0 *pi/180),0>
  0.35 * < cos(120 *pi/180),sin(120 *pi/180),0>
  0.35 * < cos(240 *pi/180),sin(240 *pi/180),0>
  0.35 * < cos(  0 *pi/180),sin(  0 *pi/180),0>
}

Code inspection shows that the polygon insideness testing code tests for precise equality of the points, whereas the general policy of POV-Ray is to accept slight rounding differences.

When POV-Ray 3.70 is run on a terminal, on an unix shell, and the user hits ctrl-Z to suspend (stop) POV-Ray, rather than stopping as expected, POV-Ray just reports that it did receive the signal, as if to laugh at the user “I’m not obeying your puny stop attempts”. It

The default action (as happens if the SIGTSTP signal is not trapped) would be much better, and is usually safe also in multithread programs.
It takes actual effort to _ignore_ the TSTP signal (namely, to trap that signal), so the current behavior is definitely a dysfeature, probably an oversight by whoever programmed the signal handler.

Also, when the terminal window is resized, POV-Ray needlessly reports that it received a signal number so-and-so (the number of SIGWINCH), adding irrelevant noise to its terminal output. Both signals (SIGTSTP and SIGWINCH) should simply be excluded from the signal trapping mask. I guess there are also other signals that are needlessly captured. It would be better to capture only those signals that an action is needed for.

I got a 29023 Segmentation fault ... but it was NOT repeatable. I reran the render job repeatedly and it displayed appropriate error message. I had renamed a texture identifier but missed an occurrence inside texture_map.

FYI: I did a build off the depot last evening.(21:13)

couple of observations:

if no photons are gathered (hey it happens ... my typo) when attempting to save a photon map the warning message just indicates that it couldn’t save the map, maybe the message could be enhanced to say something like: No photons were gathered so no map information was saved. At first I thought something had changed in my I/O restrictions (I’m writing to an image directory not current or work directory)

when reading a previously saved photon map there is no indication that it was read in other than the end stats showing a small amount of photon time. I don’t recall but didn’t v3.6 indicate that the a previously saved map was being used? Just for the heck of it I moved the map file aside and it did prove to me that it was indeed being input. Some sort of message at the time the file is read in might be helpful.

Using interpolated image_maps in functions results in pixel-sized dot-artifacts when using the functions back into pigments.

This problem doesn’t shows using the same code on POV-Ray 3.6.

I qualified it as “low severity” because is not going to happen to most users: it will show only when using some advances techniques, for example when you want to decompose an image_map into the RGB components, perform operations, and mixing them back with an averaged pigment (example attached).

Trying to build povray-3.6 against png-1.5 fails spectacularly.

.../include/png.h:666: error: forward declaration of ‘struct png_info_def’ png_pov.cpp:1405: error: invalid use of undefined type ‘struct png_info_def’

appears a lot in the output.

The problem is that png-1.5 hides structure members from public view.

Note, this is not the same problem as  FS#144 .

In the folder “ready made scenes”, there is the file “B0 - Basic scene 11 - pure white background.txt”.
The text string to be rendered lacks the “e” in “pure”. Unfortunately, this makes the typo visible in the “Insert menu” preview image.

If the “e” is added, the text needs to be scaled a bit smaller (0.43 instead of 0.44) to fit inside the view.

The following code contains a possible “fix” (whatever).
It would be great if someone could fix this easy issue:

text { ttf "arial.ttf", "pure white background", 0.02, 0.0 // thickness, offset
       texture{ pigment{ color rgb<1,0.6,0>*0.5 } 
                finish { phong 0.1 }
              } // end of texture

       scale<1,1.25,1>*0.43
       translate<-2.10,-0.30,0.00 >
      } // end of text object ---------------------------------------------

povray +Imesh_camera.pov +Omesh_camera.png +FN +W800 +H600 produces a “Failed to parse command-line option” error. when I rename my pov source file to ess_mesh_camera.pov it runs fine. seems to be pointing to a clash with the +im option. i also had another file that renaming it got me going.

While testing if the png support was working, I tried 3.7.0rc3 on NetBSD-5.99.45/amd64, and had the following problems:

1. lseek64 (used in source/base/image/image.cpp) is not portable, and not necessary on NetBSD (off_t there is large-file-safe)
2. unix/Makefile.am doesn’t add -lboost_thread to povray_LDADD, which breaks linking the executable.
3. vfe/unix/platformbase.cpp uses CLOCK_THREAD_CPUTIME_ID, which is not provided on NetBSD (I hacked around it by defining the symbol to “0”, but that’s of course not a correct fix).
4. vfe/unix/platformbase.cpp uses CLOCK_PROCESS_CPUTIME_ID, which is not provided on NetBSD – it’s called CLOCK_REALTIME like on FreeBSD, so we could just add defined(NetBSD) to the FreeBSD case, except for point 3.
5. vfe/unix/vfeplatform.cpp uses WEXITSTATUS. For this, sys/wait.h should be included. The obvious fix is
#ifdef HAVE_SYS_WAIT_H
# include <sys/wait.h>
#endif
but this also needs a check in the configure script.

Fixing all this, I get it to build, but core dump when run against the demo file from http://www.csb.yale.edu/userguides/graphics/povray/demo.pov.html.
Backtrace is
Program terminated with signal 11, Segmentation fault.
#0 0x00000000004ac479 in boost::gregorian::date::date ()
(gdb) bt
#0 0x00000000004ac479 in boost::gregorian::date::date ()
#1 0x00000000004d29f7 in boost::gregorian::date::date ()
#2 0x0000000000479a85 in std::vector<std::string, std::allocator<std::string> >::operator= ()
#3 0×0000000000461570 in std::vector<std::string, std::allocator<std::string> >::operator= ()
#4 0x00000000004656c7 in std::vector<std::string, std::allocator<std::string> >::operator= ()
#5 0x00000000005efc9f in Imf::TypedAttribute<std::string>::typeName ()
#6 0x00000000005fd890 in Imf::TypedAttribute<std::string>::typeName ()
#7 0x00000000005fe5d8 in Imf::TypedAttribute<std::string>::typeName ()
#8 0x000000000045d6dc in std::vector<std::string, std::allocator<std::string> >::operator= ()
#9 0x00007f7ffd80d9cf in thread_proxy ()

from /usr/pkg/lib/libboost_thread.so.1.45.0

#10 0x00007f7ffd00b24e in pthreadcreate_tramp (cookie=<value optimized out>)
at /archive/cvs/src/lib/libpthread/pthread.c:473
#11 0x00007f7ff8871780 in _lwp_park50 () from /usr/lib/libc.so.12

Please advise on how to proceed.

The documentation says:

“-J Sets aa-jitter off”

However, it seems to have no effect. -J0 will turn off jittering.

Given the following two statements, a missing closing brace in the function declaration fn should throw a parse exception; instead it causes a memory access violation when trying to use fn in the second delcaration:

#local fn = function { 
  pigment { image_map { png "MultiPassBlobs3.png" gamma 1 map_type 0 once }} 
#local clr = fn(0,0,0);

.../scenes/objects/fractal2.pov

in global_settings  "max_trace" should be "max_trace_level"

.../scenes/advanced/diffuse_back.pov

in global_settings  assumed_gamma statement should not be followed by a semicolon

.../scenes/advanced/blocks/stackernight.pov

in global_settings  "assummed_gamma" should be spelled "assumed_gamma"

.../scenes/portfolio/*.pov

in all files other than _empty.pov the parse stops at the lines containing "[frame_number-1]" I'm guessing it should be "[frame_number]-1"  

original post on povray.beta-test:

POV-Ray 3.7.0.RC3 on Slackware 13.0 x86_64.
I pointed povray to use the calibri.ttf font over on my Windows 7 partition.
The result is garbled - strange letters with accents appear instead of the
expected text. (KDE's kfontview opens calibri.ttf OK, with nothing strange).

Pointing povray to use other fonts of Win7, e.g. comic.ttf and arial.ttf, was
OK.

I solved the problem by pushing calibri.ttf through fontforge and resaving it
as mycalibri.ttf.

Cheers,
Peter

Confirmed with development version on Windows XP x64.

Possibly a similar problem as  FS#162 .

original posting from povray.beta-test:

I get this error message:
"Parse Error: bad allocation  Render failed"
- after the code below has been running for about 3 seconds.

// ===== 1 ======= 2 ======= 3 ======= 4 ======= 5 ======= 6 ======= 7

#version 3.7;

#while (true)
  #local Fn = function { transform { translate <0, 0, 0> } }
  #undef Fn
#end // while

// ===== 1 ======= 2 ======= 3 ======= 4 ======= 5 ======= 6 ======= 7

I'm using POV-Ray for Windows - Version 3.7.0.RC3.msvc9-sse2.win32
The operating system is Windows XP.

With the code above, the error messages has so far appeared every time
right after 3318K tokens have been parsed. But with other versions of
my code, the error message does not always show up. (Sometimes the
render finishes and sometimes the parsing stops at different "times".)

[...]

Other users report no error message, but memory consumption rising to about 1.2 GB.

A scene of a hollow sphere viewed from the inside:

difference {
    sphere { 0, 100 }
    sphere { 0, 99 }
    pigment { rgb 1 }
    finish { ambient .4 }
}

global_settings {
    radiosity {
        error_bound .1
    }
}

Rendering produces dark splotches at the centers of the pretrace blocks, as shown in the attached image. Blocks rendered earlier have darker splotches. They also differ in shape between renders even with +HR (but not with +WT1).

Turning “always_sample” on, changing “pretrace_end” to 0.01, or increasing “count” past 1000 makes them imperceptibly faint (they can still be seen by increasing image contrast).

This is possibly a bug, as 3.6 doesn’t produce these artifacts regardless of additional settings.

povray.beta-test thread