Function use in image maps is broken.

The following should result in a white and green checkered unit square, but is transparent.

camera {
   location  <0.0, 0.5, -4.0>
   direction 1.5*z
   right     x*image_width/image_height
   look_at   <0.0, 0.0,  0.0>
}

background {rgb <1,1,1>}

light_source {
  <-30, 10, -30>           
  color rgb <1, 1, 1> 
}

plane {y,-1 pigment{checker rgb <1,0,0> rgb <1,0.5,0.5> }}

plane {y,-0.99 
 pigment {
  image_map { 
   function 10,10 { 
    pigment {checker rgb <0,1,0>, rgb <1,1,1> scale 0.1}
   }
   once 
  }
  rotate <90,0,0>
 }
}

The parser is failing to read the .tiff file extension from the input string...

bump_map { tiff "earth03_hf2.tiff" }

Results in file not found, but

bump_map { tiff "earth03_hf2" }

will find the file. It might be that it’s not a three character extension?

The following files were garbled in changelist #4648 by stripping all line terminators, making the files unusable:

• .../scenes/advanced/cats/cattext.inc
• .../scenes/animations/life/blink4.inc
• .../scenes/animations/life/walker.inc

Line terminators of these files were already problematic in previous versions of the file, having been CR-only.

The following files changed with #4648 should be reviewed closely as well, as they were previously CR-only, too, and at least some of them exhibit some peculiarities regarding line and/or file terminators:

• .../scenes/animations/pentmap/pentmap.ini
• .../scenes/animations/pentmap/pentmap.pov
• .../scenes/animations/slinky/slnk.ini
• .../scenes/incdemo/metals/metals.doc
• .../scenes/incdemo/stones/stones.doc
• .../scenes/incdemo/woods/morewood.doc
• .../scenes/incdemo/woods/woods.doc
• .../scenes/textures/pigments/skies/skies.doc

It appears that reflective bounces from blobs are
not incrementing the trace level, causing self-
reflecting hall of mirror portions to stall renders.

I have installed POV-Ray 3.7 beta 34 on Windows 7
The setting ‘Output_Alpha=on’ doesn’t work as documented. With this setting the Background appear black and the scene is transparent.

Check with this Code:

camera {
   location  <3, 3, -3>
   direction <0, 0, 2.9>
   look_at   <0, 0, 0>
   right 1.0*x
}
light_source { < 3, 3, -3> color red 1 green 1 blue 1 }
sphere 
{
   <0,0,0> 0.8
   pigment {color rgb<1,1,0>}
   finish
   {
      ambient 0.2
      diffuse 0.8
   }
}

and with this ini file:

Input_File_Name=C:\Users\dfv_rei1\AppData\Local\Temp\Cuadrigula\PreviewObject.pov
Output_File_Name=C:\Users\dfv_rei1\AppData\Local\Temp\Cuadrigula\PreviewObject.tga
Output_File_Type=t
Output_Alpha=on
Bits_Per_Color=24
+W121 +H121
+a0.3
+q11
+a

The attached TIFF file was created with IC using compression. When used in an image_map, POV-Ray 3.7.0.beta.34 on Windows XP x64 renders the image all transparent, while POV-Ray 3.6.2 renders the file fine. The same effect can be seen with LZW-compressed TIFF files created with Adobe Photoshop 6.0.

Uncompressed TIFF files created with either IC or Photoshop render fine in both versions of POV-Ray.

Stepping through the code of POV-Ray 3.7.0 shows that the same code path is taken regardless of compression, but the libtiff library returns different alpha channel values, indicating a problem in that library. POV-Ray 3.7 still uses libtiff 3.6.1, whereas the POV-Ray 3.6 branch has been updated to libtiff 3.8.2, which according to the change history includes a few alpha-related changes.

Source code inspection during examination of issues with the scene published at http://povray.sitewww.ch/?p=177 show the following issues with current (beta.34) implementation of dispersion in POV-Ray 3.7:

• The same adjustment to the IOR that is applied at the very first dispersion interface is erroneously applied to all subsequent interfaces.

• As an exception, dispersion adjustment is erroneously not applied to any interface defined by the surface of a non-dispersing object embedded into a dispersing object.

While this still allows to use dispersion for artistic effect, it is neither physically realistic, nor does it match 3.6 behavior.

Reported by cshake + pov @ gmail . com in p.beta-test, 14th december 2009

I wrote a simple script to convert fractint color maps to povray color_maps so I could use ApoMap to make nice fractal colors for pov, but I ran into
“Parse Error: Blend_Map too long.” The map has entries from 0/255 up to 255/255 (inclusive). I looked up the documentation which says that color_maps can have from 2 to 256 entries, and this is exactly 256 entries.
I’m posting this in beta-test because I assume that the documentation is correct for v3.6, and that a previous version can handle 256 entries.

The following scene shows how photons are “boosted” by pass_through objects; removing one of the boxes will reduce the effect; the effect can be seen with 3.6 as well as current betas:

global_settings {
  max_trace_level 10 // makes a difference!
  photons { spacing 0.02 }
}

camera {
  right x*image_width/image_height
  location  <0,2.6,-10>
  look_at   <0,0.75,0>
}

light_source {
  <500,500,150>
  color rgb 1.3
  photons {
    refraction on
    reflection on
  }
}

sky_sphere {
  pigment {
    gradient y
    color_map {
      [0.0 rgb <0.6,0.7,1.0>]
      [0.7 rgb <0.0,0.1,0.8>]
    }
  }
}

plane {
  y, 0
  texture { pigment { color rgb <1.0, 0.8, 0.6> } }
}

#declare M_Glass=
material {
  texture {
    pigment {rgbt 1}
    finish {
      ambient 0.0
      diffuse 0.05
      specular 0.6
      roughness 0.005
      reflection { 0.1, 1.0 fresnel on }
      conserve_energy
    }
  }
  interior {
    ior 1.5
    fade_power 1001
    fade_distance 0.9
    fade_color <0.5,0.8,0.6>
  }
}


sphere {
  <1.1,1,-1.3>, 1
  material { M_Glass }
  photons {
    target 1.0
    refraction on
    reflection on
  }
}

cylinder {
  <-1.2,0.01,0.8>, <-1.2,2.5,0.8>, 1
  material { M_Glass }
  photons {  // photon block for an object
    target 1.0
    refraction on
    reflection on
  }
}

box {
  <2.4,0,-2.3>, <2.6,4,-0.3>
  material { M_Glass }
  photons { pass_through }
}

box {
  <2.9,0,-2.3>, <3.1,4,-0.3>
  material { M_Glass }
  photons { pass_through }
}

Compiled on linux (revision #5066),
./configure COMPILED_BY=”###” –disable-io-restrictions

the command: povray –benchmark

is failing:
Failed to parse INI file

povray –version

I/O restrictions:          disabled
X Window display:          enabled (using SDL)
Supported image formats:   gif tga iff ppm pgm hdr png jpeg tiff openexr
Unsupported image formats: -

Build architecture:  x86_64-unknown-linux-gnu
Built/Optimized for: x86_64-unknown-linux-gnu (using -march=native)
Compiler vendor:     gnu
Compiler version:    g++ 4.4.3
Compiler flags:      -pipe -Wno-multichar -Wno-write-strings -fno-enforce-eh-specs -s -O3 -ffast-math -march=native -pthread 

Include file golds.inc still provides warnings when parsed, a shame for a standard include file.
(colors.inc is ok, I did not test the other includes)

File '/usr/local/share/povray-3.7/include/golds.inc' line 118: Parse Warning:
 Expected pure RGB color expression, unexpected filter and transmit components
 will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 119: Parse Warning:
 Expected pure RGB color expression, unexpected filter and transmit components
 will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 129: Parse Warning:
 Expected pure RGB color expression, unexpected filter and transmit components
 will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 130: Parse Warning:
 Expected pure RGB color expression, unexpected filter and transmit components
 will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 140: Parse Warning:
 Expected pure RGB color expression, unexpected filter and transmit components
 will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 141: Parse Warning:
 Expected pure RGB color expression, unexpected filter and transmit components
 will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 151: Parse Warning:
 Expected pure RGB color expression, unexpected filter and transmit components
 will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 152: Parse Warning:
 Expected pure RGB color expression, unexpected filter and transmit components
 will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 162: Parse Warning:
 Expected pure RGB color expression, unexpected filter and transmit components
 will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 163: Parse Warning:
 Expected pure RGB color expression, unexpected filter and transmit components
 will have no effect.

There is a confirmed bug when writing jpg file format with the current linux build (beta39). when specifying +fj output format the following error occurs:

JPEG parameter struct mismatch: library thinks size is 372, caller
expects 376
JPEG parameter struct mismatch: library thinks size is 372, caller
expects 376
Render failed

this has been confirmed on ubuntu 10.4 and openSuSe 11.2 (assuming 32 bit version) as openSuSe 11.2 64-bit reports no problem

there has been a proposed fix to ~smp/source/base/image/jpeg.cpp that appears to work, however it requires some additional work to make it a platform (linux) and compiler (gcc) specific fix.

From post in povray.general (circa 29 september 2010: “Maximum Resolution of Renders?”)

The ultimate goal would be a 41000×41000 image. However each time I have attempted to render that Pov-Ray has crashed on
me. Even when using a single, simple test object (a plain white sphere that
should use a single pixel). So I think this is running into a program limitation
at present.

It won’t be for the faint hearted: a 30500 x 30500 does still produces the bug, but you’d better have 24 GB of true ram to test it.
(it’s a render of a few “real” minutes if you do not swap, for any very quick scene (a 305 x 305 in 0.117s moved to 220s for 30500×30500 on my system when corrected))

With core-dumped enable, the issue is pointed in the creator of PixelContainer.
The problem is due to the resize() parameter: despite the parameter being a size_t (8 bytes long on 64bits), the computation ( h * w * 5 ) use unsigned int for h & w (and signed int for 5).

As a consequence, the value of resize is computed as a signed int... havoc might happen when the signed bit (#31) is propagated to the #63 to #32 of size_t... vector does not enjoy a negative value for resize (and destroy itself: no iterator on coming soon call! hence the crash when the values in the vector are to be initialised)

30500²: (in hex)

1 15 3C 71 50 floats
4 54 F1 C5 40 bytes

Basic solution: promote the 5 to an unsigned long, forcing the computation to happen on unsigned long, avoiding promotion of silly sign-bit, and keeping the resize’s value as a good number.

aka: resize( w * h * 5) becomes resize ( w * h * 5ul )

This solution has been tested and seems fine (it’s just that in base/image/image.cpp, there is a lot of resize()!).
For all resize(), the “ul” must be added. (and that means also that resize( w * h ) must be rewritten as ( w * h * 1ul ). )

[Original Title: “texture_map interpolation does not work correctly for some patterns”]

The below test scene should yield identical textures
T_STRAND1 and T_STRAND2 but this is not the case. Reported
and verified in

http://news.povray.org/povray.general/thread/%3C4cbd804b%241%40news.povray.org%3E/

The problem seems to affect bozo, bumps, dents, granite, spotted,
and maybe wrinkles. The problem was reported earlier in

http://news.povray.org/povray.beta-test/thread/%3C48112367%241%40news.povray.org%3E

with a comment that 3.6 gives the expected results

#declare C_STRAND = color rgb 1;

#declare C_CLEAR  = color rgb 0;

#declare T_STRAND = texture
{
  pigment {color C_STRAND}
}

#declare T_CLEAR = texture
{
  pigment {color C_CLEAR}
}

#declare T_STRANDS1 = texture
{
  pigment
  {
    granite scale 2 color_map
    {
      [0.0 color C_STRAND]
      [0.5 color C_CLEAR]
      [1.0 color C_CLEAR]
    }
  }
}

#declare T_STRANDS2 = texture
{
  granite scale 2 texture_map
  {
    [0.0 T_STRAND]
    [0.5 T_CLEAR]
    [1.0 T_CLEAR]
  }
}

plane
{
  z, 10
  texture {T_STRANDS1}
  //texture {T_STRANDS2}
} 

I/O Restriction defaults are not being properly set on a fresh install of POVWIN.

See this thread for more information.

Given the following two statements, a missing closing brace in the function declaration fn should throw a parse exception; instead it causes a memory access violation when trying to use fn in the second delcaration:

#local fn = function { 
  pigment { image_map { png "MultiPassBlobs3.png" gamma 1 map_type 0 once }} 
#local clr = fn(0,0,0);

in change #3319, csg got a new computation for its weighted textures.

But I’m confused by the computation of the weight: (circa end of csg.cpp file)

COLC weight = 1.0f / min(COLC(textures.size() - firstinserted), 1.0f);

I would have used a max() rather than a min().

It is transparent when there is only one texture, but:

• should there be no texture (an error...): it would be a division by 0
• should there be more than 1, the weight of each would be 1. which is without consequence UNLESS there is already some other textures in the list. The right value (from previous code) was 1/n

Or did I get a confusion about min() ?

min(0,1) == 0
min(4,1) == 1

Using max would protect against the division by 0 and the right value when multiple textures are used.

Any thought ?

UV-mapped textures for parametrics are broken in POV-Ray 3.70 RC3, in cases where two (or more) parametrics overlap in a scene.

In the following scene, note how the texture per se is always taken properly from whichever parametric is in front, while the UV coordinates are erroneously taken always from the red parametric where both overlap, no matter whether it is in front or back.

camera {
  location  <0.0, 1.5, -3.0>
  direction 1.5*z
  right     x*image_width/image_height
  look_at   0
}

light_source { <-30, 30, -30> color rgb 1 }

#declare Param = parametric {
  function { u*v*sin (15*v) },
  function { v },
  function { u*v*cos (15*v) }
  0, 1
  contained_by { box { -1,1 } }
  accuracy 0.002
  precompute 15 x,y,z
  rotate 180*x
  translate  <0.3,0.5,0>
}

object {
  Param
  uv_mapping
  texture {
    pigment {
      gradient x frequency 3
      color_map {
        [0 color red .5 ]
        [1 color red 1 ]
      }
    }
  }
}

object {
  Param
  uv_mapping
  texture {
    pigment {
      gradient x frequency 7
      color_map {
        [0 color green .5 ]
        [1 color green 1 ]
      }
    }
  }
  rotate y*180
}

POV-Ray 3.62 renders the scene properly.

As this bug has been found during code inspection, the uderlying cause has already been identified; I’m currently working on a fix.

Hello,

this bug report relates to this thread: http://news.povray.org/povray.beta-test/thread/%3Cweb.4e0064d9a3970d212b256d410%40news.povray.org%3E/

In /unix/unixoptions.cpp around line 817:

while ( !Stream.eof() )
{
	// get and preprocess line
	std::getline(Stream, line);
	line = pre_process_conf_line(line);
	++line_number;
	// skip empty line
	if(line.length() == 0)
		continue;
        [...]
}

`Stream.eof()` could never be true as well as `line.length()` always can be zero, leading to an endless loop. In my case, the problem occurred due to my ~/.povray/3.7/povray.conf being a directory instead of a file.

To fix the problem, one has to consolidate this loop by not only checking for eofbit, but also for failbit and badbit of `Stream`. The getline() method on a directory does not set the eofbit, but it sets fail and bad (test: http://codepad.org/RiZGo3ia). According to http://www.cplusplus.com/reference/iostream/ios/operatornot/ fail and bad can be checked for by `!Stream`. A simple `if (!Stream) break;` within the loop fixes the problem (patch file attached).

Are there more missing checks on iostreams like this in the code? :) They should definitely be fixed.

Furthermore, one could think about using the boost filesystem library to be able to distinguish files and directories to provide good error messages.

Hope that helps,

Jan-Philip Gehrcke

I reinstall a system, (so ~/.povray was not existant), and then
installed povray from sources, as a normal user (excepted the
installation step):

$ ./configure ...
$ make
$ make check
$ sudo make install

I find these steps pretty much standard.

The problem I’m noticing is that the $HOME/.povray hierarchy get owned
by root (hey, it’s *MY* directory !). There is a chown in the Makefile
for the target files (povray.ini & povray.conf), as well as subtree but:

* povowner & povgroup are hard coded to 0 (I would expect a copy of the
owner & group of $HOME, wouldn’t I ?)

For getting povowner, I would suggest `stat -c “%u” $HOME`
For povgroup, `stat -c “%g” $HOME`

Are they portable enough ? (I could ask on Monday a Solaris system, but
I do not have bsd and the other flavours of unix)

(Stat is in section 1 of man, part of gnu coreutils, /usr/bin/stat)

Side note: This is fine to install for the local user, but new later
users could benefit also from a ~/.povray/3.7/ subtree ; what about also
filling the /etc/skel (when available) ? (and in /etc/skel, root owner
is fine!)

When using mesh_camera type ‘0’

The first line of the mesh output seems to be repeated resulting in incorrect light colour values.

If the first line of the texture is skipped then the values seem to be correct.

The documentation states mesh_camera 0 should produce 1 pixel per index but it currently seems to produce 1 lighting pixel per face.

This output seems fairly meaningless as using this data for vertex colours (presumably the intention for mesh_camera 0) would result in a flat shaded model.

Logically it would make more sense to output 1 pixel per vertex instead of 1 pixel per face. Another solution might 1 pixel per face index (as per documentation) although POV would need to record which indices had already been computed otherwise it could end up duplicating computation.

At the moment I’ve written a code workaround for my exporter which produces a special mesh but this is obviously a much more complex solution to a fairly simple problem.

Output images are 0.5 pixels too right and 0.5 pixels too down (mesh_camera_bug.pov).

The error is cumulative when image files are used again as texture (run 10 times mesh_camera_bug_reuse.pov).

This can be compensated by adjusting UV maps (mesh_camera_fix.pov and mesh_camera_fix_reuse.pov).

Tested with and without anti-aliasing.

Recently, I have been rendering an animation with POV-Ray 3.7 RC 6 using radiosity, photons and backside illumination. Many frames contained artefacts like in the attached image file. Trying to eliminate those artefacts I observed the following:

• Rendering the same frame several times did not reproduce the artefacts or reproduced them differently. I.e., when I rendered a second (third, fourth, ...) time with +SF100 +EF100, the black space in the image was somewhere else or in some cases disappeared.
• With radiosity turned off, no such artefacts have happened since, even in the scenes where they happened with radiosity turned on.
• Turning off photons with radiosity still turned on did not remove the artefacts.
• Rendering with one thread on one CPU core instead of two threads on two cores did not change anything except the rendering time.
• Changing the radiosity settings I have not tried thoroughly, but at least raising or lowering count or error_bound does not seem to have any effect on this.

While POV-Ray was rendering, no other memory-intensive or CPU-intensive programs were running and POV-Ray itself did not report any error (just the usual warnings that some of the used features could change in future versions etc.). Render priotity was set to “high”.

Due to a recent thread in povray.general (7th September 2013), I dive
into the code of height field creation.

There is 2 TODO in source/backend/support/imageutil.cpp, for
image_height_at() (circa line 512)

The first one is about using the index of palette-image: As far as *257
would indeed perform a better job to cover the full range than *256, it
would break backward compatibility with previous versions of povray (3.6
included) which only promoted the index as the Most significant byte,
keeping the least one at 0.

But on the second one, the new formula is plain wrong: (r*255+g)*255
should be (r*256+g)*255.
In previous versions, r*255 was the Most significant byte, and g*255 was
the least one.
Ergo, the value was r*255*256 + g*255, which can and should be only
factored as (r*256+g)*255;

I know it is damn late in the release schedule, but can that be either
be fixed before final official delivery or a memo added to the release
note that it would be fixed later and backward-bug will not be
maintained for that specific point (using rgb-8 or less bit per
channel-image for height field)

(it was not bugged in 3.6.1 nor before, it’s just that tiny little bit
of 3.7 that would should that bug)

If you look carefully at the attached pictures (povray +I... +H700 +W700 +A0.01) of scene and scene36, there is a significant difference at the top.
With 3.6, it matched exactly (hence the noise on the top pixels row) the view.
With 3.7, it cannot reach the top and leave a white area
(another difference is the slope on the side are also a bit more lower with 3.7, easier to spot when alternating the display of both pictures)

If you want to regenerate hf.png, it was rendered with povray 3.7RC7, +W400 +H400 +A0.01 +Ihf.pov

The white line at the bottom is expected, as the minimal value of the height field is “full green”

can not run POV-Ray on ubuntu 14.04, boost 1.54,

./configure COMPILED_BY=”Dmitry <my>”

...

Libraries
---------
checking whether to link with cygwin DLL... no
checking whether to enable static linking... no
checking for the pthreads library -lpthreads... no
checking whether pthreads work without any flags... no
checking whether pthreads work with -Kthread... no
checking whether pthreads work with -kthread... no
checking for the pthreads library -llthread... no
checking whether pthreads work with -pthread... yes
checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE
checking if more special flags are required for pthreads... no
checking for boostlib >= 1.37... yes
checking whether the Boost::Thread library is available... yes
checking whether the boost thread library is usable... no
configure: error: in `/home/di/workspace2/povray-3.7-stable':
configure: error: cannot link with the boost thread library

log in attach file

The following paraboloid renders correctly:

intersection
{ quadric { <1, 0, 1>, <0, 0, 0>, <0, 1, 0>, -1 }
  cylinder { 0, y, 1 }
}

However, when I extend the clipping cylinder downward:

intersection
{ quadric { <1, 0, 1>, <0, 0, 0>, <0, 1, 0>, -1 }
  cylinder { -y, y, 1 }
}

the object disappears completely in POV-Ray 3.7 and 3.7.1. In POV-Ray
3.6.1, it renders as expected.

POV-Ray 3.7.0.unofficial (self-compiled with g++ 4.8, but completely unaltered)
POV-Ray 3.7.1-alpha.8150025.unofficial
openSUSE 13.2 GNU/Linux

This scene file illustrates the problem:

// +w480 +h240
#version 3.6; //[sic]

global_settings { assumed_gamma 1 }

camera
{ location <0, 1, -7.5958>
  look_at <0, 1, 0>
  right 2 * x
  up y
  angle 43.1038
}

#default { finish { diffuse 0.6 ambient rgb 0.15618 } }

light_source
{ <-4.3125, 9.6250, -7.4695>,
  rgb 6856.3
  fade_power 2 fade_distance 0.10417
  spotlight point_at <0, 1, 0> radius 45 falloff 90
}

box
{ -<9, 11, 9>, <9, 11, 9>
  pigment { rgb 1 }
}

plane
{ y, 0
  pigment { checker rgb 0.05 rgb 1 }
}

intersection
{ quadric { <1, 0, 1>, <0, 0, 0>, <0, 1, 0>, -1 }
  cylinder { 0, y, 1 }
  pigment { green 0.5 }
  translate <-1.25, 1, 0>
}

intersection
{ quadric { <1, 0, 1>, <0, 0, 0>, <0, 1, 0>, -1 }
  cylinder { -y, y, 1 }
  pigment { green 0.5 }
  translate <1.25, 1, 0>
}

On the right side, there should have been a cylinder capped with a paraboloid. A thread has been started in povray.bugreports. Jerome has started to look at it.

In unix distribution these scripts

• allscene.sh
• allanim.sh
• porfolio.sh

have the variable VERSION set to 3.6

The parser is missing extra period characters when it parses a float as a vector component.

#local sample = <0.0.0.1,0,0>;

Doesn’t generate an error, but should.

After a recent update on the POV-Wiki the GuMax skin doesn’t recognize MediaWiki:Common.css entries.

In POV-ray 3.7 beta 33 under Windows XP, the editor’s MRU list incorrectly handles files that have a comma in the pathname. Only the part of the name before the comma appears on the MRU list, but the rest of the name is left off.
Consequently, the file cannot be reopened via the MRU list. The file is also not reopened on launch if pov was closed with the file open. This also occurs in 3.6.1, I haven’t tried it under 3.6.2 yet.

Interestingly enough, a quick peek in the registry shows that both 3.6 and 3.7
are saving the entire path name correctly under HKEY_CURRENT_USER\Software\POV-Ray\v3.6\POV-Edit\Recent (or \v3.7\POV-Edit\Recent).

This seems to be limited strictly to the editor’s MRU list. The file can still be opened normally using the open dialog box. Calling POV-ray from the command line and using a file or path name with commas in it works correctly. Included files with commas in the path work correctly, and the Tools→Edit last rendered file/View last rendered file work correctly also.

To duplicate, save a file with a comma in the pathname (either in the directory
name or the filename itself). Close the file, then attempt to reopen it using the MRU list in the file menu.

Trace level is not handled properly with blobs using per-component reflective or refractive textures, leading to lockups. Stepping through the code, it seems that POV-Ray fails to properly mark the blob object as increasing the trace level.

(Until this bug is fixed, the issue can be worked around in most cases by assigning a reflective texture to the blob as a whole.)

In the following scene, the mesh object will always cast a fully-opaque shadow, even if the image has an alpha channel:

camera {
  location  <0.5, 1.0, -1.0>
  look_at   <0.5, 0.0,  0.5>
}

light_source { <0, 30, 0> color rgb 1 }

mesh {
    triangle { <0,0,0>, <1,0,0>, <1,0,1> uv_vectors <0,0>, <1,0>, <1,1> }
    triangle { <0,0,0>, <1,0,1>, <0,0,1> uv_vectors <0,0>, <1,1>, <0,1> }
    texture { pigment { uv_mapping image_map {png "FOOBAR.png"} } }
}

plane { y, -0.1 pigment { color rgb 1 } }

The following modification to the texture will give the expected results:

    texture { uv_mapping pigment { image_map {png "FOOBAR.png"} } }

The problem can be observed with both POV-Ray 3.7 (tested with beta.34), as well as 3.6 (tested with 3.6.2).

File output code for virtually all file formats performs gamma correction on unclipped color values, which leads to issues when color values happen to be negative for some reason and gamma does not happen to be an integer value such as 1.0 or 2.0. As a consequence, subsequent steps (clipping and converting to integer) apparently produce compiler-dependent results. Compiled with Microsift or Intel compilers, POV-Ray seems to write zero brightness in such cases, while compiled with g++ 4.4 (and possibly other compilers) it seems to write full brightness instead.

(See thread news://news.povray.org:119/4ba819f6@news.povray.org for examples.)

The proper solution should be to apply gamma correction after clipping.

When choosing PPM output with a bit depth other than 8 bits per color channel (e.g. +FP16), POV-Ray messes up the colors (see thread news://news.povray.org:119/4babb48f$1@news.povray.org)

When using cutaway_textures the differenced part traces black. Simple scene file attached.

The #switch directive isn’t parsing correctly. In the following construct NO warning or error is generated:

#switch (RF)

case (0)
	rotate z*355
#break
case (144)
	rotate z*7.5
#break
case (216)
	rotate z*5
#break

#end

RF is a variable passed to the macro in which this construct resides. The first ‘case’ action IS executed, but none of the others are on successive calls to the macro. If I properly add ‘#’ to the second case the 1st and 2nd condition are executed but not the last. If ‘#’ is REMOVED from any of the break directives an error is generated and parsing halts.

POV-Ray 3.7-generated JPEG image output files do not conform to the JFIF standard. Most importantly, the files written do not use the standard YCbCr color model (they seem to use plain RGB instead), nor do they have a proper JFIF tag.

As a consequence, some software may be unable to read the generated JPEG files properly. In addition, it seems that POV-Ray mixes up the Red and Blue channels.

I can no longer run a Myfile.ini over a network, on a different computer.

Possiblely related to:

    http://bugs.povray.org/task/97   FS#97  (Forward-slash pathnames not fully supported in Windows version)

-
Cannot open INI file
‘\\STEPHEN-POVRAY\Bishop3d\Objects\Industrial_enclosure\Telco_enclosure_extra.ini’.
Failed to start render: Failed to parse INI file

The following line in the lathe1a.pov, lathe1b.pov, and lathe1c.pov appears to have an error in it.

  <3.6.9>, <4, 1.1>, <3.4, 2>, <3, 1>, <2, 1>,

Although it works in version 3.6, only in 3.7 does a render time error ocurr.

Scene source should be adjusted to the following

  <3.6, 0.9>, <4, 1.1>, <3.4, 2>, <3, 1>, <2, 1>,

Automatic removal of user-specified bounding boxes cannot be disabled in current POV-Ray 3.7 betas; the Remove_Bounds ini file setting and the +/-UR command line option are silently ignored.

OpenEXR output currently writes an alpha channel when Output_Alpha=off (-UA), and does not write an alpha channel when Output_Alpha=on (+UA), i.e. doing it just the wrong way round.