|
186 | Geometric Primitives | Definite Bug | 3.70 RC1 | Very Low | Low | numeric precision problem with polygon start/end points | Closed | |
3.70 RC2 |
Task Description
polygon objects comprised of multiple “sub-polygons” don’t work properly if start/end points of sub-polygons do not exactly match, as can be demonstrated by the following code:
#default { texture { pigment { rgb 1 } finish { ambient 1.0} } }
camera {
orthographic
up 3.5*y
right 3.5*x*image_width/image_height
location <0,0,-4>
look_at <0,0,0>
}
polygon { 8,
// outer triangle
0.70 * < cos( 0 *pi/180),sin( 0 *pi/180),0>
0.70 * < cos(120 *pi/180),sin(120 *pi/180),0>
0.70 * < cos(240 *pi/180),sin(240 *pi/180),0>
0.70 * < cos(360 *pi/180),sin(360 *pi/180),0>
// inner triangle
0.35 * < cos( 0 *pi/180),sin( 0 *pi/180),0>
0.35 * < cos(120 *pi/180),sin(120 *pi/180),0>
0.35 * < cos(240 *pi/180),sin(240 *pi/180),0>
0.35 * < cos(360 *pi/180),sin(360 *pi/180),0>
}
Note that the end points /should/ be identical. There are however some minor rounding differences, which mess up polygon computations. Compare with the following code, which leads to the desired results:
polygon { 8,
// outer triangle
0.70 * < cos( 0 *pi/180),sin( 0 *pi/180),0>
0.70 * < cos(120 *pi/180),sin(120 *pi/180),0>
0.70 * < cos(240 *pi/180),sin(240 *pi/180),0>
0.70 * < cos( 0 *pi/180),sin( 0 *pi/180),0>
// inner triangle
0.35 * < cos( 0 *pi/180),sin( 0 *pi/180),0>
0.35 * < cos(120 *pi/180),sin(120 *pi/180),0>
0.35 * < cos(240 *pi/180),sin(240 *pi/180),0>
0.35 * < cos( 0 *pi/180),sin( 0 *pi/180),0>
}
Code inspection shows that the polygon insideness testing code tests for precise equality of the points, whereas the general policy of POV-Ray is to accept slight rounding differences.
|
|
185 | Other | Definite Bug | 3.70 beta 41 | Very Low | Very Low | wrong message about image resolution | Closed | |
3.70 RC2 |
Task Description
‘povray -H10 -W20 myscene.pov’ will generate a file with a picture 10 pixels high and 20 pixels wide, BUT in the message pane it displays
Image resolution.....20 by 10 (rows 1 to 20, columns 1 to 10)
instead of
Image resolution.....20 by 10 (rows 1 to 10, columns 1 to 20)
or
Image resolution.....20 by 10 (columns 1 to 20, rows 1 to 10)
|
|
184 | Radiosity | Definite Bug | 3.70 RC1 | Very Low | Low | Too many pretrace steps when pretrace_start < pretrace_ ... | Closed | |
3.70 RC2 |
Task Description
If pretrace_start is set below pretrace_end, POV-Ray will run a high number of pretrace steps (without changing pretrace resolution).
|
|
183 | Texture/Material/Finish | Possible Bug | 3.70 beta 40 | Very Low | Low | cutaway_textures broken with child unions | Tracked on GitHub | |
Future release |
Task Description
When using cutaway_textures in a CSG object that has union children, results are not as expected; instead, surfaces in the union children that have no explicit texture will be rendered with the default texture instead. This is not the case for e.g. difference children.
Example:
#default { texture { pigment { rgb 1 } } }
camera {
right x*image_width/image_height
location <0,1.5,-4>
look_at <0,1,0>
}
light_source { <500,500,-500> color rgb 1 }
#declare U = union {
sphere { <0,-0.1,-1>, 0.3 }
sphere { <0, 0.1,-1>, 0.3 pigment { color red 1 } }
}
intersection {
sphere { <0,0,0>, 1 pigment { color green 1 } }
object { U }
cutaway_textures
rotate y*90
}
When declaring U as an intersection instead, the results are as expected, with the surface of the first sphere in U being rendered with the texture defined in the outer intersection.
|
|
182 | Texture/Material/Finish | Definite Bug | 3.70 beta 40 | Low | High | multi-textured blobs in intersections / differences bro ... | Closed | |
3.70 beta 41 |
Task Description
Multi-textured blobs are broken with 3.7 beta 40 when used inside an intersection, as can be demonstrated by the following scene:
#default { texture { pigment { rgb 1 } } }
camera {
right x*image_width/image_height
location <0,1.5,-4>
look_at <0,1,0>
}
light_source { <500,500,-500> color rgb 1 }
difference { blob {
threshold 0.6
sphere { < 0.75, 0, 0>, 1, 1 texture { pigment { color red 1 } } }
sphere { <-0.375, 0.65, 0>, 1, 1 texture { pigment { color green 1 } } }
sphere { <-0.375, -0.65, 0>, 1, 1 }
} }
With POV-Ray 3.7.0 beta 40, the entire blob is rendered with the default texture.
The same problem can be seen with “difference” or “merge” instead of “intersection”.
Omitting the CSG “envelope”, using “union”, or assigning the blob to a variable first and then using it inside an intersection, will yield the expected result.
POV-Ray 3.62 renders all variants as expected.
According to initial analysis, the problem appears to be caused by the dual use of the “MULTITEXTURE_FLAG”, which is used in CSG to indicate use of the “cutaway_textures” feature, and in blobs to indicate per-element texturing. (The same flag is also used in meshes to indicate per-face or per-vertex texturing, so similar problems are to expected there.)
My proposal is to use an entirely separate flag for the “cutaway_textures” feature (the blob and mesh can safely continue to share the MULTITEXTURE_FLAG).
|
|
181 | Backend | Unimp. Feature/TODO | 3.70 beta 40 | Very Low | Medium | Unimplemented, altered or missing features to document ... | Tracked on GitHub | |
|
Task Description
This is a list of unimplemented features and things to fix with respect to 3.7 vs 3.6 compatibility. They either need to be fixed in code, or failing that, to be documented prior to release.
Create_INI works differently from 3.6. Prior versions of POV-Ray would write all options to the file, even if they were not supplied by the user (non-supplied options would take the default value). Currently in 3.7, only supplied options are written, because the front-end does not send unused options to the back-end. The proper fix for this would be to have a set of defines that establish the defaults all in one place (currently we rely on hard-coded values scattered around the code), and for the Output_INI_Option() function to look up and use the default when not supplied. As this is not likely to be done before 3.7 release, we need to document it as a temporary situation.
The following messages are marked as ‘currently not supported by code’ in povmsgid.h. We need to check where this comment is correct and if so the docs need to be updated to indicate this (for items that are already documented). Some items may be re-implemented later, and some may never be:
kPOVAttrib_TestAbort
kPOVAttrib_TestAbortCount
kPOVAttrib_VideoMode
kPOVAttrib_Palette
kPOVAttrib_DisplayGammaType
kPOVAttrib_FieldRender
kPOVAttrib_OddField
kPOVAttrib_AntialiasGammaType
kPOVAttrib_LightBuffer
kPOVAttrib_VistaBuffer
kPOVAttrib_DrawVistas
This bug should be edited to add/remove items as time goes by.
|
|
180 | Runtime error | Definite Bug | 3.70 beta 40 | Very Low | High | lseek64(fileno(fd), ...) is not the same as fseek64(fd, ... | Closed | |
3.70 RC1 |
Task Description
FileBackedPixelContainer uses a FILE* to manage the backing store and under Linux/Unix defines fseek64 to be a kind of incantation of lseek64.
Since fseek64 and fseek64 have return values that are logical opposites this causes an exception to be thrown.
Moreover since the buffer size on a FILE is quite a bit smaller than a line of pixels (in terms of bytes), mostly what’s being done in this function is a lot of sloshing of bytes that don’t do much... which is to say that the intended caching mechanism is getting a very low hit rate now that povray is working in 32×32 pixel per-thread chunks.
The cache miss problem and the volume of bytes read/written grows exponentially as the size of the image grows.
Attached is a replacement function that seems to be working well and should produce a performance increase even under Windows. I originally went with simply fixing the fseek/lseek problem but saw a 10% decrease in render time on 2048×1024-sized images when I made the cache target smaller.
|
|
179 | Runtime error | Definite Bug | 3.70 beta 40 | Very Low | High | unix version segfaults when $HOME not set | Closed | |
3.70 beta 41 |
Task Description
unixoptions.cpp has a getenv(”HOME”) that does an assignment without checking to see if getenv returns NULL.
This causes an immediate and unceremonious segfault in those situations where $HOME is not set such as in the case where povray is launched by a daemon.
Best solution might be to set the home to /tmp and print a warning message about $HOME not being set.
|
|
178 | Texture/Material/Finish | Feature Request | 3.70 beta 39 | Very Low | Low | Modify metallic reflection code to better work with con... | Tracked on GitHub | |
|
Task Description
The combination of metallic reflection with conserve_energy causes the reflection to lose colour, as demonstrated by the following scene:
global_settings {
max_trace_level 10
}
camera {
right x*image_width/image_height
location <-2,2.6,-10>
look_at <0,0.75,0>
}
light_source {
<500,300,150>
color rgb 1.3
}
sky_sphere {
pigment {
gradient y
color_map {
[0.0 rgb <0.6,0.7,1.0>]
[0.7 rgb <0.0,0.1,0.8>]
}
}
}
plane {
y, 0
texture { pigment { color rgb 0.7 } }
}
#declare M=
material {
texture {
pigment {rgbt <1.0,0.7,0.2,0.99>}
finish {
ambient 0.0
diffuse 0.5
specular 0.6
roughness 0.005
reflection { 0.8, 1.0 metallic }
conserve_energy
}
}
interior { ior 1.5 }
}
box {
<-0.2,0,-2.3>, <0.0,4,0.3>
material { M }
rotate z*5
rotate x*2
}
|
|
177 | Light source | Feature Request | 3.70 beta 39 | Very Low | Low | Add support for conserve_energy to shadow computations | Tracked on GitHub | |
|
Task Description
The following scene gives a comparison of current conserve_energy handling in standard shadow computations vs. photons.
Note how the rather highly reflective slabs fail to cast shadows, except where the photons target sphere enforces computation of shadow brightness to be done by the photons algorithm.
For more realistic shadowing without the need to enable photons, I suggest do add proper conserve_energy handling to the shadow computation code (which shouldn’t be too much effort).
global_settings {
max_trace_level 10
photons { spacing 0.003 media 10 }
}
camera {
right x*image_width/image_height
location <-2,2.6,-10>
look_at <0,0.75,0>
}
light_source {
<500,300,150>
color rgb 1.3
photons {
refraction on
reflection on
}
}
sky_sphere {
pigment {
gradient y
color_map {
[0.0 rgb <0.6,0.7,1.0>]
[0.7 rgb <0.0,0.1,0.8>]
}
}
}
plane {
y, 0
texture { pigment { color rgb 0.7 } }
}
#declare M_Glass=
material {
texture {
pigment {rgbt 1}
finish {
ambient 0.0
diffuse 0
specular 0.2 // just to give a hint where the sphere is
}
}
interior { ior 1.0 }
}
#declare M_PseudoGlass=
material {
texture {
pigment {rgbt 1}
finish {
ambient 0.0
diffuse 0.5
specular 0.6
roughness 0.005
reflection { 0.3, 1.0 fresnel on }
conserve_energy
}
}
interior { ior 1.5 }
}
sphere {
<1.1,1,-1.3>, 1
material { M_Glass }
photons {
target 1.0
refraction on
reflection on
}
}
// behind target object
box {
<-0.2,0,-2.3>, <0.0,4,0.3>
material { M_PseudoGlass }
rotate z*1 // just to better see the reflection of the horizon
}
// before target object
box {
<2.4,0,-2.3>, <2.6,4,-0.3>
material { M_PseudoGlass }
photons { pass_through }
rotate z*1 // just to better see the reflection of the horizon
}
|
|
176 | Other | Feature Request | Not applicable | Very Low | Low | Raise maxpower of the Poly Oject to 16. | Closed | |
|
Task Description
At the moment in the Poly Object the maximum power is 15. The mathematics for converting the three parametric equations for x, y and z into a formula for the Poly Object require that the equations are squared several times given max-powers of 4, 8 and even 16. I’ve one eqaution that needs power 16. At the moment this is just one power short. Please raise this to 16. That’s all I ask for.
|
|
175 | Radiosity | Feature Request | 3.70 beta 39 | Very Low | Low | Radiosity. Emissive and scattering media don't illumina ... | Closed | |
|
Task Description
Tested with beta 40. Also affect version 3.6.1 as reported in the discution group.
When using radiosity and emissive media. Any object, or part of, that is inside the media container is not affected by the illumination comming from the media.
When using scattering media, the light scattered by the media also don’t affect objects that are inside it’s container.
http://news.povray.org/povray.newusers/thread/%3C4cf8fe22%241%40news.povray.org%3E/
|
|
174 | Setup/Install | Definite Bug | 3.70 beta 39 | Very Low | Medium | I/O Restriction defaults not being properly set for POV ... | Closed | |
3.70 RC7 |
Task Description
I/O Restriction defaults are not being properly set on a fresh install of POVWIN.
See this thread for more information.
|
|
173 | Other | Feature Request | 3.70 beta 39 | Very Low | Low | Prevent POV-Ray for Windows from stealing focus | Closed | |
|
Task Description
In some cases it may be desirable to run POV-Ray from a batch file, without causing it to “steal the focus”.
I suggest making this dependant on whether POV-Ray is run with the /EXIT parameter.
|
|
172 | Image format | Unimp. Feature/TODO | 3.70 beta 39 | Very Low | Low | Re-implement progressive image output | Tracked on GitHub | |
Future release |
Task Description
With previous versions of POV-Ray, it was possible to turn off display output, but still assess the output during render by viewing the output file as it was progressively generated. This allowed e.g. to run a long render on a remote machine as a background process, and check the output from time to time via FTP or similar.
|
|
171 | Geometric Primitives | Definite Bug | 3.62 | Very Low | Low | CSG bounding box computation broken with shearing trans ... | Closed | |
|
Task Description
Bounding box computation for CSG intersection appears to be broken when one member is an arbitrarily transformed plane.
// +W640 +H480 +MB1
#include "transforms.inc"
camera {
location <-0.2, 0.5, -4.0>
direction 1.5*z
right x*image_width/image_height
look_at <0.0, 0.0, 0.0>
}
sky_sphere {
pigment {
gradient y
color_map {
[0.0 rgb <0.6,0.7,1.0>]
[0.7 rgb <0.0,0.1,0.8>]
}
}
}
light_source {
<0, 0, 0> // light's position (translated below)
color rgb <1, 1, 1> // light's color
translate <-30, 30, -30>
}
plane {
y, -1
pigment { color rgb <0.7,0.5,0.3> }
}
intersection {
sphere {
0.0, 1 }
plane { -x, 0 transform { Shear_Trans(x,y+x*0.3,z) } }
texture {
pigment {
radial
frequency 8
color_map {
[0.00 color rgb <1.0,0.4,0.2> ]
[0.33 color rgb <0.2,0.4,1.0> ]
[0.66 color rgb <0.4,1.0,0.2> ]
[1.00 color rgb <1.0,0.4,0.2> ]
}
}
finish{
specular 0.6
}
}
rotate -y*5
}
|
|
170 | Refactoring/Cleanup | Unimp. Feature/TODO | 3.70 beta 39 | Very Low | Low | Reduce memory footprint of output image buffer | Closed | |
3.70 release |
Task Description
Currently, output image is buffered using POV-Ray’s RGBFT color model and floating point values, leading to a memory consumption of 20 bit per pixel. This is an unproportionally large memory footprint, given that the only further processing performed on the buffered data is conversion of the data to the desired output file format, which will typically use only 3 bytes per pixel (at most 12 bit per pixel).
The situation can be improved by choosing the output image buffer container based on the desired output file format and parameters. To this end, the following code changes should be made:
Bundle image file format handler code into classes (typically one per file format)
Include a method to determine the best data container type for the image buffer
Instantiate the desired image file format handler object prior to rendering, querying the handler object for an image buffer
In addition to picking a suitable image data container from the already existing palette, careful design might also allow to use custom containers to directly pass the data to a library (in case the library provides its own buffering anyway), or write it directly to the output file (e.g. when writing image data to stdout). To make this compatible with multithreaded rendering, the following changes would have to be made:
Add code to detect when a row of SMP blocks has been finished, and call a certain method on the image handler object
Design the custom containers in such a way that they can buffer any number of unfinished SMP block rows as needed
|
|
169 | Parser/SDL | Possible Bug | 3.6 | Very Low | Low | Error in Linux version using #while loop and SweepSplin ... | Closed | |
3.70 RC4 |
Task Description
I used POV-Ray to make an animation of my Morgan driving around a slalom course. (If you are curious, you can see the output on youtube under my user name, nojonushi.) To make the long swooping fenders I used Mike William’s SweepSpline macro.
The code rendered the 1189 frames in one go with no problems. But the wheels in that animation do not rotate, so I then added code to rotate the wheels. In the calculations I added I used a #while loop to step through the spline containing the route coordinates and total up the distance traveled. Running POV-Ray on this file produced a random number of images and then issued an error, e.g.
0:00:00 Processing Frame 456 of 1189
0:00:00 Parsing
File: mogslalom.pov Line: 1918 Parse Warning: Patch objects not allowed in intersection. File: mogslalom.pov Line: 2988 File Context (5 lines):
object {
SweepSpline(TFSpline,
Parse Error: Identifier expected, incomplete function call or spline call found instead.
Most of the parameters for the macro are missing. But this is after successfully generating, in this case, 455 images.
I have attached a text file with set-up and sample code that has given the error on two different machines.
|
|
168 | Texture/Material/Finish | Definite Bug | 3.70 beta 38 | Very Low | Medium | noise_generator default broken | Closed | |
3.70 beta 40 |
Task Description
[Original Title: “texture_map interpolation does not work correctly for some patterns”]
The below test scene should yield identical textures T_STRAND1 and T_STRAND2 but this is not the case. Reported and verified in
http://news.povray.org/povray.general/thread/%3C4cbd804b%241%40news.povray.org%3E/
The problem seems to affect bozo, bumps, dents, granite, spotted, and maybe wrinkles. The problem was reported earlier in
http://news.povray.org/povray.beta-test/thread/%3C48112367%241%40news.povray.org%3E
with a comment that 3.6 gives the expected results
#declare C_STRAND = color rgb 1;
#declare C_CLEAR = color rgb 0;
#declare T_STRAND = texture
{
pigment {color C_STRAND}
}
#declare T_CLEAR = texture
{
pigment {color C_CLEAR}
}
#declare T_STRANDS1 = texture
{
pigment
{
granite scale 2 color_map
{
[0.0 color C_STRAND]
[0.5 color C_CLEAR]
[1.0 color C_CLEAR]
}
}
}
#declare T_STRANDS2 = texture
{
granite scale 2 texture_map
{
[0.0 T_STRAND]
[0.5 T_CLEAR]
[1.0 T_CLEAR]
}
}
plane
{
z, 10
texture {T_STRANDS1}
//texture {T_STRANDS2}
}
|
|
167 | Other | Definite Bug | 3.70 beta 38 | Very Low | Medium | Core dump when rendering to huge dimensions | Closed | |
|
Task Description
From post in povray.general (circa 29 september 2010: “Maximum Resolution of Renders?”)
The ultimate goal would be a 41000×41000 image. However each time I have attempted to render that Pov-Ray has crashed on me. Even when using a single, simple test object (a plain white sphere that should use a single pixel). So I think this is running into a program limitation at present.
It won’t be for the faint hearted: a 30500 x 30500 does still produces the bug, but you’d better have 24 GB of true ram to test it. (it’s a render of a few “real” minutes if you do not swap, for any very quick scene (a 305 x 305 in 0.117s moved to 220s for 30500×30500 on my system when corrected))
With core-dumped enable, the issue is pointed in the creator of PixelContainer. The problem is due to the resize() parameter: despite the parameter being a size_t (8 bytes long on 64bits), the computation ( h * w * 5 ) use unsigned int for h & w (and signed int for 5).
As a consequence, the value of resize is computed as a signed int... havoc might happen when the signed bit (#31) is propagated to the #63 to #32 of size_t... vector does not enjoy a negative value for resize (and destroy itself: no iterator on coming soon call! hence the crash when the values in the vector are to be initialised)
30500²: (in hex)
1 15 3C 71 50 floats
4 54 F1 C5 40 bytes
Basic solution: promote the 5 to an unsigned long, forcing the computation to happen on unsigned long, avoiding promotion of silly sign-bit, and keeping the resize’s value as a good number.
aka: resize( w * h * 5) becomes resize ( w * h * 5ul )
This solution has been tested and seems fine (it’s just that in base/image/image.cpp, there is a lot of resize()!). For all resize(), the “ul” must be added. (and that means also that resize( w * h ) must be rewritten as ( w * h * 1ul ). )
|
|
166 | Texture/Material/Finish | Definite Bug | 3.70 beta 38 | Very Low | Low | quick_color does not work | Closed | |
|
Task Description
the quick_color feature doesn’t work when +qN or Quality=N is set to 5 or below
|
|
165 | Photons | Definite Bug | 3.6 | Very Low | Low | photon problem: image of projected image_map is clipped ... | Closed | |
3.70 RC4 |
Task Description
Hi,
I have a problem with photons. The following stripped down code simulates a slide projector:
#include "colors.inc"
global_settings {
#if (1) // switch photons on/off
photons { count 1000000 }
#end
}
camera { location <0, 0, 200> sky<0,1,0> look_at <0,200,-200> angle 90 }
// projection screen
plane { z, -200 texture { pigment { White } finish{ diffuse 1 ambient 0.1} } }
// slide
polygon {
5, <0,0,0>, <1,0,0>,<1,1,0>,<0,1,0>,<0,0,0>
pigment { image_map {jpeg "s7_0.9_320.jpg" interpolate 2 filter all 1.0 } }
translate <-0.5, 0.2, -0.3>
photons { target refraction on reflection off collect off }
}
// projector lamp
light_source { <0, 0, 0> color <1,1,1> }
——————————————-
A point light source projects through a image_map onto a screen.
Without photons the projected image is ok: http://img838.imageshack.us/i/test4woph.png/
With photons the left and right bottom corners of the image will be clipped: http://img101.imageshack.us/i/test4wph.png/
The size of clipped corners depends on the y-offset in the translate command.
The povray Version is: Persistence of Vision™ Ray Tracer Version 3.6.1 (Debian (x86_64-linux-gnu-g+ + 4.3.3 @ x86_64-pc-linux-gnu)) (the 3.7 beta has the same problem)
I posted this question in the general news group and got an answer by Christian Froeschlin, who could reproduce the problem and suggested as workaround to divide the slide into small stripes
http://news.povray.org/povray.general/thread/%3Cweb.4c972bdffcc128eac947b6de0%40news.povray.org%3E/
This works, but doesn’t explain the problem.
Does anyone have an idea, whats wrong?
Many thanks, Corvin
|
|
164 | Other | Feature Request | 3.70 beta 38 | Very Low | Low | Date/time stamp on rendered images | Closed | |
|
Task Description
I’d like to request the ability to create a date/time stamp on output images so that new renders don’t always overwrite old ones. Thanks.
|
|
163 | Parser/SDL | Unimp. Feature/TODO | 3.70 beta 38 | Very Low | Medium | no pigment warning | Closed | |
Future release |
Task Description
no warning is issued when an object/primitive has no pigment type given
|
|
162 | Geometric Primitives | Definite Bug | 3.6 | Very Low | Low | Character 101 (0x65) not found in /usr/share/fonts/true ... | Closed | |
3.70 beta 39 |
Task Description
The text object isn’t working with /usr/share/fonts/truetype/freefont/FreeSans.ttf. Used to work - taken from an old .pov file of mine.
Rebuilt from http://www.povray.org/redirect/www.povray.org/ftp/pub/povray/Official/Unix/povray-3.6.tar.bz2
$ povray +ifonttest.pov +ofonttest.png
Persistence of Vision™ Ray Tracer Version 3.6.1 (g++ 4.4.3 @ x86_64-unknown-linux-gnu) This is an unofficial version compiled by: darxus [at] chaosreignscom
.....
File: fonttest.pov Line: 8 Parse Warning: Character 101 (0×65) not found in /usr/share/fonts/truetype/freefont/FreeSans.ttf File: fonttest.pov Line: 8 Parse Warning: Character 115 (0×73) not found in /usr/share/fonts/truetype/freefont/FreeSans.ttf
Verification that the problem is not in the .ttf file, this works (imagemagick):
convert -background lightblue -fill blue -pointsize 48 -font /usr/share/fonts/truetype/freefont/FreeSans.ttf label:test fonttest.png
Problem verified when compiled from source on Ubuntu Lucid. Also exists in Ubuntu binaries from Lucid and Hardy.
|
|
161 | Image format | Definite Bug | 3.70 beta 38 | Very Low | Medium | error when writing jpg format (linux build) | Closed | |
3.70 release |
Task Description
There is a confirmed bug when writing jpg file format with the current linux build (beta39). when specifying +fj output format the following error occurs:
JPEG parameter struct mismatch: library thinks size is 372, caller expects 376 JPEG parameter struct mismatch: library thinks size is 372, caller expects 376 Render failed
this has been confirmed on ubuntu 10.4 and openSuSe 11.2 (assuming 32 bit version) as openSuSe 11.2 64-bit reports no problem
there has been a proposed fix to ~smp/source/base/image/jpeg.cpp that appears to work, however it requires some additional work to make it a platform (linux) and compiler (gcc) specific fix.
|
|
160 | Other | Feature Request | All | Very Low | Very Low | Parallel GPU processing support | Closed | |
|
Task Description
...for instance nVidia’s CUDA architecture, discussed here and other places.
General consensus is that it’s not worth the effort if only a partial set of POV-Ray’s features are possible.
|
|
159 | Frontend | Possible Bug | 3.70 beta 38 | Very Low | Low | Test bug for checking features of flyspray | Closed | |
|
Task Description
Test bug for checking features of flyspray.
|
|
158 | Other | Definite Bug | 3.70 beta 38 | Very Low | Low | Antialias Gamma reporting error | Closed | |
3.70 beta 39 |
Task Description
value is erroneously clipped to the range 0..1 before being displayed
|
|
157 | Include files | Definite Bug | 3.70 beta 37a | Very Low | Medium | Warnings when parsing include file provided by distribu ... | Closed | |
3.70 beta 39 |
Task Description
Include file golds.inc still provides warnings when parsed, a shame for a standard include file. (colors.inc is ok, I did not test the other includes)
File '/usr/local/share/povray-3.7/include/golds.inc' line 118: Parse Warning:
Expected pure RGB color expression, unexpected filter and transmit components
will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 119: Parse Warning:
Expected pure RGB color expression, unexpected filter and transmit components
will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 129: Parse Warning:
Expected pure RGB color expression, unexpected filter and transmit components
will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 130: Parse Warning:
Expected pure RGB color expression, unexpected filter and transmit components
will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 140: Parse Warning:
Expected pure RGB color expression, unexpected filter and transmit components
will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 141: Parse Warning:
Expected pure RGB color expression, unexpected filter and transmit components
will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 151: Parse Warning:
Expected pure RGB color expression, unexpected filter and transmit components
will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 152: Parse Warning:
Expected pure RGB color expression, unexpected filter and transmit components
will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 162: Parse Warning:
Expected pure RGB color expression, unexpected filter and transmit components
will have no effect.
File '/usr/local/share/povray-3.7/include/golds.inc' line 163: Parse Warning:
Expected pure RGB color expression, unexpected filter and transmit components
will have no effect.
|
|
156 | Other | Definite Bug | 3.70 beta 38 | Very Low | Low | Crash when reading from DF3 file with no data, using in ... | Closed | |
3.70 RC4 |
Task Description
A df3 file is written, with header 00 00 00 00 00 00 and no data (hypothetically valid df3 file). This file is used as density file for media, using interpolation. This causes a crash once Pov-Ray starts rendering the pixels that contain media. All pixels rendered before that render fine. Using no interpolation does not cause a crash.
Sample Scene: #fopen out “random.df3” write #write (out, uint16be <0,0,0>) #fclose out
box{0,1 pigment{rgbt 1} hollow interior{media{ density{density_file df3 “random.df3” interpolate 1}}}} // interpolate 2 also crashes, interpolate 0 does not.
System: Win7 x64, 3.7 Beta 38
|
|
155 | Runtime error | Definite Bug | 3.70 beta 38 | Very Low | Medium | Not able to run --benchmark | Closed | |
3.70 beta 39 |
Task Description
Compiled on linux (revision #5066), ./configure COMPILED_BY=”###” –disable-io-restrictions
the command: povray –benchmark
is failing: Failed to parse INI file
povray –version
povray: this pre-release version of POV-Ray for Unix expires in 27 day(s) and 5 hour(s) POV-Ray 3.7.0.beta.38
This is a time-limited beta test version which expires 31 Dec 2010. General distribution is strongly discouraged.
Copyright 1991-2003 Persistence of Vision Team Copyright 2003-2010 Persistence of Vision Raytracer Pty. Ltd.
Built-in features:
I/O restrictions: disabled
X Window display: enabled (using SDL)
Supported image formats: gif tga iff ppm pgm hdr png jpeg tiff openexr
Unsupported image formats: -
Compilation settings:
Build architecture: x86_64-unknown-linux-gnu
Built/Optimized for: x86_64-unknown-linux-gnu (using -march=native)
Compiler vendor: gnu
Compiler version: g++ 4.4.3
Compiler flags: -pipe -Wno-multichar -Wno-write-strings -fno-enforce-eh-specs -s -O3 -ffast-math -march=native -pthread
|
|
154 | Setup/Install | Possible Bug | 3.70 beta 37a | Very Low | Low | Installation on linux (unix ?) in $HOME/.povray/3.7 set ... | Closed | |
|
Task Description
Installation script (from sources) when run with a classical “sudo make install” would create povray.ini & povray.conf in $HOME/.povray/3.7 (so far so fine) with the owner as root and the permission to readonly for the real user.
Same goes for the owner of the 3.7 directories tree : .povray & .povray/3.7 are created with root owner, despite being in $HOME of the performing user.
Please fix ?
|
|
153 | Runtime error | Possible Bug | 3.70 beta 37a | Very Low | Low | Error determining I/O permissions when using .ini file | Closed | |
3.70 release |
Task Description
clipka anonymous@anonymous.org wrote: > Am 29.06.2010 04:27, schrieb jberry02: > > > First, note that this is the Windows version. > > Second the issue is not with opening the ini file, but with opening the scene > > file from within the ini file. > > > > I have a scene.ini file, that has a line: > > > > Input_File_Name=scene > > > > under POV-Ray 3.5 *and* POV-Ray 3.6, the scene defined in the file scene.pov is > > rendered properly using the parameters specified in the scene.ini file. The ini > > file is opened from the POV-Ray GUI, and run using the “Run” button. > > > > under POV-Ray 3.7, I get an error - I originally thought that it was simply not > > looking for scene.pov (i.e., it wasn’t adding the .pov extension when trying to > > open the scene file), but looking closer the error is *actually*: > > > > Input file ‘C:\[...]\scene’ not found; cannot determine I/O permission for > > write. > > Failed to start render: Cannot open file. > > > > In other words, it appears that the problem is that it isn’t adding the default > > ..pov extension when it is trying to do the I/O permission check. I do not have > > any special I/O permisssions configured for any version of POV-Ray (I get the > > pop-up dialogs), and this is a change in behavior from 3.6 to the current beta > > of 3.7. The scene.pov file is not in any of the POV-Ray directories - it is in > > a separate tree where I keep my scene files. > > Having looked at it in a debugger, I can confirm that there is a > problem, and that you don’t seem to be far off the mark: > > The error occurs when POV-Ray tries to determine the I/O permissions for > the /output/ file. If that isn’t explicitly specified with a path, > POV-Ray will try to get the path from the input file; however, it will > take the unprocessed parameter (in the sample case “scene”) rather than > the file name POV-Ray makes of it (”scene.pov”), and then attempts to > get the full /long/ path name of the file (remember the good old 8.3 > filenames for compatibility with 16-bit programs?), which only works > when the file exists. > > Would you mind submitting a bug report to <http://bugs.povray.org>?
|
|
152 | Parser/SDL | Feature Request | 3.70 beta 37a | Very Low | Low | Camera in object, union statements | Closed | |
|
Task Description
Currently, cameras placed inside object or union statements will halt the render with an error. Take for instance the following case:
#local temp_camera_1 = camera
{
orthographic
location z*-12
direction z
up y
right x*image_width/image_height
scale 32
}
#local temp_light_1 = light_source
{
0
color rgb 1
translate <-30, 30, -30>
}
#local temp_light_2 = light_source
{
0
color rgb 1
translate <-30, 30, +30>
}
union
{
object {temp_light_1}
object {temp_light_2}
// camera {temp_camera_1} // doesn't work!!!
}
//object {temp_camera_1} // doesn't work!!!
camera {temp_camera_1} // works!!!
Changing this behavior would make it possible to more easily apply transformations to scene objects and the camera at the same time in situations where the scene’s frame of reference is in motion relative to the rest of the scene, for instance in animations.
|
|
151 | Runtime error | Possible Bug | 3.70 beta 37a | Very Low | Low | No way to cancel save while parsing, never ending error... | Tracked on GitHub | |
|
Task Description
On Windows, when I try and save a file while it is being parsed prior to rendering, I get an error, “Failed to save file: The operation completed successfully”, with a single OK button to click. Despite the weird wording, I’m OK with that.
However after clicking OK I get the error, “Failed to save file ‘...’“, with three buttons: Cancel, Try Again, Continue. Not sure what “Continue” means in this context, given that the possibilities would seem to be covered by the other two buttons. Whatever.
Also, sometimes I get a message with only a single “Retry” button. Not sure what the exact message was.
Anyway, the real problem is that, regardless of which button I press, the program continues to spawning the same error message endlessly. Luckily there is a delay between them, but still it would be nice to have at least one of the three buttons *stop* POV-Ray from asking me again.
Also, once the program finishes parsing the file and it becomes possible once again to save the file, it does nothing. I.e. it doesn’t save the file. So what’s the point of the message and all the options? Why not just say, “Unable to save the file, file is parsing” and be done with it?
I think I recall the same behavior in 3.6.2, so it’s nothing new that’s been introduced.
|
|
150 | Frontend | Compatibility Issue | 3.70 beta 37a | Very Low | Low | Windows file association problems (Win7 only??) | Closed | |
|
Task Description
Windows allows you to associate programs with file extensions using the “Open with” file manager right-click menu extension.
I’m running Windows 7 64bit, and installed the 64 bit versions of 3.6.2 and the beta appropriately.
A couple of problems that I haven’t tested very thoroughly:
1. If you have both POV 3.6.2 and the beta installed at the same time, you can no longer using this dialog change the association to the beta once it has been created for 3.6.2. There’s no error or anything; it just opens the file inside 3.6.2 instead. Maybe because both versions appear as “POV-Ray for Windows” to this dialog? Would adding the version number to the name fix things? Anything I can do on my end of things to resolve this?
2. In POV-Ray 3.6.2, I can use this dialog to open *.inc, *.txt and other files in POV-Ray, but only if POV-Ray isn’t already running. If POV-Ray is already running I get an “Only /EDIT and /RENDER may be passed to previous instance” error. Files with the *.pov extension open properly regardless, without any error. I am unable to test this in the beta at the moment due to the first problem unfortunately. Could someone please test this with the beta and confirm whether the behavior also exists?
3. With the POV-Ray 3.7 beta, entering the following command in the command prompt results in the same error:
"C:\Program Files\POV-Ray for Windows v3.7\bin\pvengine64.exe" "D:\Working\Povray\GearHead\LoadingScreen\btr_maanji.pov"
If I change it to the following it works however:
"C:\Program Files\POV-Ray for Windows v3.7\bin\pvengine64.exe" /EDIT "D:\Working\Povray\GearHead\LoadingScreen\btr_maanji.pov"
Is this error/behavior really necessary? Would it be OK to instead change the behavior when the /EDIT flag is omitted in the command-line such that the file is opened in the editor by default, without throwing an error?
|
|
149 | User interface | Feature Request | 3.70 beta 37a | Very Low | Low | Tray icon: show render progress | Closed | |
|
Task Description
In the tray icon, I’d like to see the render progress indicated somehow icon itself. Either a set of numbers (percents), or a change in color of the icon (e.g. from top to bottom). Something like the attached images.
|
|
148 | Documentation | Feature Request | 3.70 beta 37a | Very Low | Low | Thumbnails in docs for shapes.inc, shapes_old.inc, shap ... | Closed | |
|
Task Description
The documentation entries for shapes.inc, shapes_old.inc, shapes2.inc, shapesq.inc, etc. should have thumbnails next to the object descriptions.
|
|
147 | Frontend | Possible Bug | 3.70 beta 37a | Very Low | Low | Statistic_File not working? | Closed | |
|
Task Description
In POV 3.6 you could set the Statistic_File option to a custom file and folder path. In the beta I get an “Cannot open file” error. Has the feature been intentionally removed or did it become broken?
|
|
146 | Parser/SDL | Possible Bug | 3.70 beta 37a | Very Low | Low | Macros are finnicky about how you type your code | Closed | |
|
Task Description
Macros are finicky about how you type your code. What works outside macros sometimes fails inside them. For more information see the threads:
“Problems with macro (3.6)”, in p.a-u, 06-09-10 “Bad operands”, in p.g, 05-20-10
Still not sure *what* exactly the problem was, but one of my workarounds ended up working.
|
|
145 | Parser/SDL | Feature Request | 3.70 beta 37a | Very Low | Low | Stack trace report on error | Tracked on GitHub | |
|
Task Description
In other languages if you encounter an error you’ll often be presented with a stack trace showing not only the file and line number the error occurred at, but also any calling functions and _their_ calling functions and so on.
Currently, Povray reports the line number of the error as well as the last five or so lines prior to the error. This is usually OK in simple scenes, but breaks down when you start making use of inclusion and macros.
Let’s say you have a macro located in a file that you then include in your scene. Within your scene you call the macro multiple times, passing input to it. However, by accident you pass _invalid_ input to the macro at some point, resulting in an error when parsing. In this case Povray will report the error as belonging to the macro whereas the actual bug exists in the calling code. If the macro is called more than once in your scene it can be difficult to figure out _which_ instance is the one supplying the bad input.
Not sure how much of this is achievable in Povray.
|
|
144 | Image format | Compatibility Issue | 3.6 | Very Low | Medium | povray compatibility issue with png-1.4 | Closed | |
3.70 beta 39 |
Task Description
source/png_pov.cpp included in povray-3.6.1 contains calls to an internal function of libpng (png_write_finish_row) which was removed from the public interface quite a while ago, so linking fails.
Also, in the 1.4 releases of libpng, the info_struct “trans” member was renamed to trans_alpha. This causes a compilation error in the same file.
A suggestion for the solution: a) remove the png_write_finish_row prototype and function call b) add something like: #if PNG_LIBPNG_VER < 10400 #define trans_alpha trans #endif and change cmap[index].Transmit = 255 - r_info_ptr→trans[index]; to cmap[index].Transmit = 255 - r_info_ptr→trans_alpha[index]; (two occurrences).
|
|
143 | Backend | Feature Request | 3.70 beta 37a | Very Low | Low | explicit Output_File_Name for images/animations | Closed | |
|
Task Description
The ability to specify an exact name for output images during animations would be great. As it is, POV-Ray appends a numerical designation to each image (e.g. image001.png, image002.png, etc. Overriding this behavior would allow certain tasks to be accomplished without cluttering the hard drive. For instance, an image could be rendered over and over again. Certain things like cellular automata, ripple tank simulations and feedback fractals could be performed without the resulting long list of images in a given directory.
The command line option could be in the form of +oefile/+Output_File_Name_Exact=file or some such.
|
|
142 | Texture/Material/Finish | Feature Request | 3.70 beta 37a | Very Low | Low | camera_view pigment from MegaPOV | Tracked on GitHub | |
Future release |
Task Description
I probably don’t have to explain why the camera_view pigment in MegaPOV was important, but I will list some reasons anyway:
1) post-processing could be performed in-scene 2) new types of focal blur effects could be created 3) feedback fractals were possible
I’m sure there are many others, as this is one of those features that has undetermined potential!
|
|
141 | Documentation | Compatibility Issue | 3.70 beta 37a | Very Low | Low | Document changed behavior processing INI files | Closed | |
3.70 release |
Task Description
The documentation assumes that INI files (as well as the command line!) are parsed and processed instantly. This no longer holds true for POV-Ray 3.7, where parsing INI files (and the command line) and processing it are separate operations that occur at different times. As such, one consequence is that INI file options only take effect after reading the whole INI file, and possibly later.
As such, documentation statements such as <http://www.povray.org/documentation/view/3.6.1/222/> “Note: that these options take effect immediately when specified. Obviously any error or warning messages that might occur before the option is read will not be affected.”
Are no longer correct. It needs to be explained that options only take effect after the INI file has been read. An error in the INi file causes other options _not_ to take effect because reading of the INi file is aborted prematurely.
|
|
140 | Platform-specific | Feature Request | 3.70 beta 37a | Very Low | Low | "Reload" option in File menu | Tracked on GitHub | |
|
Task Description
Would be great to have a “Reload” option in the File menu to manually reload the current file from disk, discarding all subsequent changes since the last save.
|
|
139 | Platform-specific | Feature Request | 3.70 beta 37a | Very Low | Low | "Delete" option in File menu | Closed | |
|
Task Description
Would be nice to have a “Delete” option in the File menu to delete the current file from disk.
|
|
138 | User interface | Feature Request | 3.70 beta 37a | Very Low | Low | "Rename" option in File menu | Tracked on GitHub | |
|
Task Description
Would be great if there were a “Rename” option in the editor File menu to rename the current file name. Otherwise, you have to close the file, rename it in file manager, then open the file again, thus loosing the current tab position and undo history for the file.
|
|
137 | Include files | Feature Request | 3.70 beta 37a | Very Low | Low | atand function | Closed | |
3.70 beta 38 |
Task Description
There already exist atan, atan2 and atan2d functions, why not atand?
|