|
20 | User interface | Feature Request | 3.70 beta 32 | Very Low | Very Low | render window behavior | Tracked on GitHub | |
|
Task Description
When changing the behavior of the render window, “Keep above main”, requires restarting the POV editor to take effect. It would be nice either to get a warning to restart, or to get it to work without restarting.
|
|
323 | User interface | Possible Bug | 3.70 release | Very Low | Very Low | Tooltip for render speed status bar has wrong unit | Tracked on GitHub | |
|
Task Description
Tooltip popup for render speed always displays as “Pixels per Second” rather than matching status bar. I’ve noticed it in 3 renders so far. Most of my renders are fast enough not to see any other unit besides PPS, but I should be able to reproduce again if necessary.
|
|
86 | Parser/SDL | Feature Request | Not applicable | Defer | Very Low | Add support for more RNG types | Tracked on GitHub | |
Future release |
Task Description
The current 32-bit linear congruential generator used as RNG in POV-Ray is sometimes quite limited for some purposes and in a few cases its poor quality shows up (as has been demonstrated more than once in the newsgroup). Thus it would be nice if POV-Ray offered additional, higher-quality random number generators, besides the current one (which should probably remain for backwards compatibility). These RNGs could include algorithms like the Mersenne Twister and the ISAAC RNG, both of which have very decent quality and have an enormous periods (while at the same time being very fast).
After a long discussion, the following syntax for specifying the RNG type and seed (which may be larger than 32 bits) has been suggested:
seed(<value>) | seed(<type>, <value> [, <values>])
For example:
#declare Seed1 = seed(123); // Use the current RNG, with seed 123
#declare Seed2 = seed(1, 123); // Identical to the previous one
#declare Seed3 = seed(2, 456, 789, 123); // Use RNG algorithm #2,
// with a large seed (96 bits specified here)
A C++ implementation of the ISAAC RNG can be found at http://warp.povusers.org/IsaacRand.zip
|
|
87 | Geometric Primitives | Feature Request | Not applicable | Defer | Very Low | Add new feature: Reference object | Tracked on GitHub | |
Future release |
Task Description
When you instantiate an object several times, eg:
object { MyObj translate -x*10 }
object { MyObj translate x*10 }
POV-Ray will copy that object in memory, at least for most types of objects. Not for all of them, though. Most famously if MyObj is a mesh, it won’t be copied, but only a reference to the original will be used, thus saving memory. (There are a few other primitives which also don’t cause a copy, such as bicubic_patch and blob, but those are naturally not so popular as mesh, so it’s a less known fact.)
AFAIK the reason why referencing (rather than copying) is not used for all types of objects is rather complicated, and mostly related to how transformations are applied to these objects. For example if the object being instantiated is a union, the translates above will be (AFAIK) applied to the individual members of the union rather than to the union object itself.
Copying, however, can be quite detrimental in some situations. For example if you have a huge union, and you want to instantiate it many times, the memory usage will be that many times larger (compared to just one instance). This is sometimes something which the user would not want, even if it made the rendering slightly slower as a consequence. (In other words, better to be able to render the scene in the first place, rather than running out of memory.)
Redesigning POV-Ray so that all objects would be referenced rather than copied would probably be a huge job, and in some cases a questionable one. There probably are situations where the current method really produces faster rendering times, so redesigning POV-Ray so that it would always reference instead of copy, could make some scenes render slower.
So this got me thinking about an alternative approach: How hard would it be to create a special object which sole purpose is to act as a reference to another object, without copying it? This special reference object would act as any regular object, would have its own transformation matrix and all that data related to objects, but its sole purpose is to simply be a “wrapper” which references an existing object. It could be, for example, like this:
object_ref { MyObj translate -x*10 }
object_ref { MyObj translate x*10 }
The end result would be exactly identical as earlier, but the difference is that now MyObj behaves in the same way as a mesh (in the sense that it’s not instantiated twice, but only once, even though it appears twice in the scene), regardless of what MyObj is.
In some cases this might render slightly slower than the first version (because POV-Ray has to apply the transformations of the object_ref first, after which it applies whatever transformations are inside MyObj), but that’s not the point here. The point is to save memory if MyObj is large.
An object_ref would behave like any other object, so you could do things like:
#declare MyObjRef = object_ref { MyObj };
object { MyObjRef translate -x*10 }
object { MyObjRef translate x*10 }
(The only thing being instantiated (and copied) here is the “MyObjRef” object, not the object it’s referring to, so that actual object is still stored in memory only once.)
In some situations it might even be so that referenced objects actually render faster than if the objects were copied because references increase data locality, lessening cache misses.
I believe this could be a rather useful feature and should be seriously considered, unless there are some major obstacles in implementing it.
|
|
99 | Refactoring/Cleanup | Unimp. Feature/TODO | 3.70 beta 36 | Defer | Very Low | Refactor engine (front- & back-end) code for Unicode su... | Tracked on GitHub | |
Future release |
Task Description
Front- & Back-end code should be refactored for full Unicode support in scene files and strings.
|
|
129 | Parser/SDL | Feature Request | 3.70 beta 37a | Defer | Very Low | Hash arrays | Tracked on GitHub | |
Future release |
Task Description
Currently, array items may only be referenced by their index number (an integer). It would be nice to also be able to assign string values as array indexes, as in other scripting languages.
|
|
133 | Geometric Primitives | Feature Request | 3.70 beta 37a | Defer | Very Low | Subdivision support | Tracked on GitHub | |
Future release |
Task Description
Someone built a version of Povray with internal support for automatic subdivision of meshes. See:
http://www.cise.ufl.edu/~xwu/Pov-Sub/
Would like to see this feature added natively to Povray.
|
|
237 | User interface | Definite Bug | 3.70 RC3 | Defer | Very Low | Glitch in displaying rendered pixels and percentage | Tracked on GitHub | |
|
Task Description
When rendering in multiple passes (radiosity in my case), the elapsed pixels and percentage, written to terminal are first displayed like this: Rendered 126202 of 360000 pixels (35%) Then on the second stage the output text becomes shorter and you see Rendered 25344 of 360000 pixels (7%)%) The contents of the previous status are not erased, so the longer text persists (note the duplicate percentage sign and closing parenthesis). Such a glitch could have more drastic effect in rare cases.
I’m running Version 3.7.0.RC3 (g++ 4.6.2 x86_64-unknown-linux-gnu) compiled for the Arch Linux package.
|
|
242 | Other | Feature Request | All | Defer | Very Low | Algorithm to fix the so-called shadow line artifact | Tracked on GitHub | |
|
Task Description
The so-called shadow line artifact (http://wiki.povray.org/content/Knowledgebase:The_Shadow_Line_Artifact) which affects objects with a ‘normal’ statement as well as smooth meshes and heightfields can be really annoying sometimes. Currently the only way to remove it is to make the object shadowless, which isn’t a good solution except in very special cases.
This algorithm could remove the artifact: If the actual normal vector of the object points away from the light source (its dot-product with the light vector is negative) but the perturbed normal points towards it (dot-product positive), then ignore the first shadow-test intersection with the object itself.
There are alternative ways of implementing an equivalent functionality:
- Don’t check the condition (if it’s too difficult to check due to how the code is designed) but always ignore the first intersection with the objects itself. This will work properly with closed surfaces but not with open ones, so it might need to be a feature for the user to turn on with a keyword (similar to eg. ‘double_illuminate’).
- Alternatively, don’t ignore the first intersection, but instead ignore the “opposite side” of the object’s surface (again, possibly only if a keyword has been specified). In other words, if we are rendering the outer side of the object, ignore its inner side when shadow-testing, and vice-versa.
- Perhaps simply add a feature to make surfaces one-sided (similarly to how they can be made so in OpenGL and similar scanline rendering systems). In other words, the inner side of a surface is completely ignored everywhere, making the object virtually invisible from the inside. The advantage of this feature would be that it can have uses other than simply removing the shadow line artifact.
|
|
272 | Other | Feature Request | 3.70 RC6 | Defer | Very Low | Minor change, significant speedup in cubic polynomial s... | Tracked on GitHub | |
3.71 release |
Task Description
While familiarizing myself with the code, I found some small changes in the solve_cubic function that lead to a significant speedup.
In my experience, “pow” is by far the slowest function in math.h and replacing it with simpler functions usually makes a tremendous impact on the speed (it’s an order of magnitude slower than sqrt/exp/cbrt/log).
solve_cubic has a “pow” function that can be replaced by cbrt (cubic root), which is standard in ISO-C99 and should be available on all systems. Separate benchmarks of solve_cubic function show this change almost doubles the speed and does not lower the accuracy. As solve_cubic is part of the solution of quartic equation, this improves the speed for many primitives. Testing with a scene containing many torus intersection tests (attached below) I still observed almost 10% speedup (Intel, 4 threads, 2 hyperthreaded cores, antialiasing on, 600×600: from 91 to 84 seconds). And this is for a torus, where a lot of time is spent in the solve_quartic and cubic solver is only called once! Similar speedup should be expected for prism, ovus, sor and blob.
I do believe the cubic solver can be done without trigonometry, but that would mean changing the algorithm, introducing new bugs and requiring a lot of testing. However, the trigonometric evaluation can still be simplified (3% speedup in full torus benchmark).
These changes don’t affect the algorithm at all, they are mathematically identical to the existing code, so the changes can be applied immediately. I also included other changes just as suggestions. Every change is commented and marked with [SC 2.2013].
This sadly does not speedup the sturm solver, which uses bisection and regula-falsi and looks very optimized already.
The test scene I used has a lot of torus intersections from various directions (shadow rays, main rays, transmitted rays).
|
|
300 | Other | Feature Request | 3.70 RC7 | Defer | Very Low | Reference Documentation Support | Tracked on GitHub | |
|
Task Description
As emerged as an idea during the discussion of FS#299, an SDL / POV-Ray editor feature would be useful that allows API documentation via formal comments, e.g. in include files:
/**
* Creates a car object.
* @param a
* description of param a
* ...
*/
#macro car(a,b,c)
...
#end
In addition to the ability of (auto-)generating a documentation file from such comments, an editor window feature would be convenient that allows popup display of a macro’s (object’s / parameter’s / ...) documentation section.
|
|
303 | Other | Definite Bug | 3.70 RC7 | Defer | Very Low | wrong bit depth reported for OpenEXR file format | Tracked on GitHub | |
|
Task Description
When using OpenEXR output file format, POV-Ray erroneously reports it as “24 bpp EXR” in the message output, while in fact it generates a 3×16 = 48 bpp file.
|
|
4 | Subsurface Scattering | Unimp. Feature/TODO | 3.70 beta 32 | Very Low | Low | Integrate Subsurface Scattering with standard lighting ... | Tracked on GitHub | |
Future release |
Task Description
Subsurface Scattering still uses its own rudimentary code to compute illumination from classic light sources; this must be changed to use the standard light source & shadow handling code, to add support for non-trivial light sources (e.g. spotlights, cylindrical lights, area lights), partially-transparent shadowing objects etc.
|
|
26 | Geometric Primitives | Definite Bug | 3.61 | Very Low | Low | Artifacts rendering a cloth which has two-side textures | Tracked on GitHub | |
Future release |
Task Description
Dear PovRay maintainers and developers, congratulations for your great RayTracer!
We think that we have found a bug while we were rendering a piece of cloth.
In this piece of cloth were defined two textures, one for one side and one for the another side:
texture { mesh_tex0_0 }
interior_texture { mesh_tex0_1 }
these definitions in their original context.
We have found some artifacts in the final rendering, in concrete near some wrinkles, please, look at the attached file “render_artifacts.tga”, I have painted a big green arrow near the artifacts, maybe you’ll need to do a zoom to see them more accurately.
They are as though the texture of the other side was painted in the incorrect side.
Fortunately, we have a patch to fix this bug (thanks to Denis Steinemann, he made the implementation for PovRay 3.5, so I have adapted these changes to release 3.6.1)
Although we have found this bug in the Windows and Linux 3.6.1 releases, the patch was generated in Linux (using the source code release of “povray-3.6.1”).
To apply this patch, inside the parent folder of the directory “povray-3.6.1” execute:
patch -p0 < other_side_artifacts.patch
And the “povray-3.6.1” will be patched and you will get a console output like this:
patching file povray-3.6.1/source/lighting.cpp
patching file povray-3.6.1/source/mesh.cpp
patching file povray-3.6.1/source/render.cpp
We don’t know if this “hack” is enough smart to apply in the next release, but we think that it fixes the bug (the artifacts dissapear).
Best regards and thank you very much for your great RayTracer!
|
|
27 | Other | Feature Request | 3.70 beta 32 | Very Low | Low | Add texture support to background statement | Tracked on GitHub | |
Future release |
Task Description
Adding full texture statement support to the background statement (with a scale of 1/1) aligned with the image_map direction of an image would allow i.e. specifying an image as background easily.
|
|
28 | Frontend | Feature Request | 3.70 beta 32 | Very Low | Low | #debug message not displayed. | Tracked on GitHub | |
Future release |
Task Description
The #debug message stream is only being flushed when it hits a newline character, instead of after each #debug statement. This means that some final strings don’t show up.
#debug "This line prints,\n but this line doesn't."
|
|
41 | Other | Feature Request | 3.70 beta 32 | Very Low | Low | improve command-line parsing error messages | Tracked on GitHub | |
|
Task Description
POV-Ray 3.6, upon encountering problems when parsing command line and/or .ini file options, would quote the offending option in the error message.
POV-Ray 3.7 currently just reports that there is some problem with the command line, without providing any details. I suggest changing this, as the information may be helpful at times.
|
|
44 | Radiosity | Feature Request | All | Very Low | Low | Improve Normals Handling in Radiosity | Tracked on GitHub | |
Future release |
Task Description
Currently, radiosity does not make use of the fact that pertubed normals would theoretically just require a different weighting of already-sampled rays, leading to the following issues:
Honoring normal pertubations in radiosity leads to an increased number of samples, slowing down sample cache lookup.
The increased number of samples is generated from a proportionally higher number of sample rays, slowing down pretrace even further.
Low-amplitude pertubations tend to be smoothed out; “reviving” these is only possible by increasing the general sample density.
Handling of multi-layered textures with different normal pertubations is currently poorly implemented.
As a solution, I propose to store for each radiosity sample not only the resulting illumination for a perfectly unpertubed normal, but from the same set of sample rays also compute the illumination for an additional set of about a dozen standardized pertubed-normal directions, and interpolate among these when computing the radiosity-based illumination for a particular point that has a pertubed normal.
For backwards compatibility, this method of dealing with pertubed normals in radiosity might be activated by a different value for the “normal” statement in the radiosity block, say, “normal 2”.
|
|
47 | Preview | Possible Bug | 3.70 beta 32 | Very Low | Low | Render Preveiw window can become disabled | Tracked on GitHub | |
|
Task Description
If a render is continued with the +c option and the render had completed, the render preview window will disappear and the show/hide render window button will be grayed. Even after the scene is modified and the command line options have been changed, the show/hide button will still be grayed.
Opening or changing to another scene and rendering will not restore the button, nor will rendering with +d. However, if a trace is started using -d, halted, then continued using +d (or allowed to finish completely with -d and a new one is started using +d), then the preview window is restored.
This behavior is different from 3.6.1, which correctly always showed the preview window (since +d is default) unless -d was specified.
|
|
65 | Parser/SDL | Feature Request | 3.70 beta 34 | Very Low | Low | Add support for vectors with functions | Tracked on GitHub | |
Future release |
Task Description
Being able to have functions operate on vectors would be pretty nice to have.
|
|
71 | User interface | Unimp. Feature/TODO | 3.70 beta 34 | Very Low | Low | raise warning when command line option has no effect | Tracked on GitHub | |
|
Task Description
Warnings should be raised when a command line option has no effect, for example...
pvengine +am
is legal, but without the number after it, it has no effect.
pvengine +am7
should be an error, and also raises no warnings.
|
|
79 | Source code | Feature Request | 3.70 beta 35a | Very Low | Low | Full-Featured Test-Scene to check the correctness of po... | Tracked on GitHub | |
Future release |
Task Description
Hi,
it would be nice if there exists a test scene (not a benchmark) which has a high coverage of povray source and can be used as correctness validation of povray. It schould be produce an image which can be compared to a golden reference image.
It may be also possible to create a regression test suite which does automatic comparision of the render results.
|
|
96 | Texture/Material/Finish | Feature Request | Not applicable | Very Low | Low | User-defined warps | Tracked on GitHub | |
Future release |
Task Description
User-defined warps would be nice to have, something along the lines of:
warp {
function { MyFnX(x,y,z) } // function to compute pattern-space x-coordinate from object-space <x,y,z> coordinate
function { MyFnY(x,y,z) } // ditto for pattern-space y coordinate
function { MyFnZ(x,y,z) } // ditto for pattern-space z coordinate
}
// a displacement warp:
warp {
function { x + MyFnX(x,y,z) }
function { y + MyFnY(x,y,z) }
function { z + MyFnZ(x,y,z) }
}
|
|
106 | Distribution | Unimp. Feature/TODO | 3.70 beta 37 | Very Low | Low | Update sample scenes and include files for POV-Ray 3.7 ... | Tracked on GitHub | |
|
Task Description
Most sample scenes and include files were designed at times when POV-Ray did not to any proper gamma handling, or still used the inferior 3.6 “assumed_gamma” mechanism.
All the scenes and include files should be reviewed, and updated to fit the new 3.7 gamma model.
The primary task will probably be gamma-adjusting literal color values and ambient parameters; I suggest using macros (which ideally should be defined in an include file) to be set according to the #version statement, so the scene/include file could be kept compatible with older versions.
|
|
108 | Parser/SDL | Feature Request | 3.70 beta 37 | Very Low | Low | motion_blur feature similar to Megapov version | Tracked on GitHub | |
Future release |
Task Description
motion_blur which is a simple and effective feature to use in Megapov to simulate motion blur of, e.g. bird wings, propellers or running animals, would be a neat addition to version 3.7 and later.
In Megapov, the feature requires a line of code in the global_settings{} e.g.: motion_blur 10, 2 and a declaration for the moving object. e.g.:
motion_blur {
type 0
object{MyObject material{MyMaterial rotate x*clock*2}}
rotate x*clock*10
}
type represents several types of pre-defined motions.
Thanks,
Thomas
|
|
115 | Texture/Material/Finish | Feature Request | 3.70 beta 37a | Very Low | Low | More cutaway_textures | Tracked on GitHub | |
Future release |
Task Description
Think this is still a problem. See the attached scene file. Find the WindowFrameSegment declaration for more info. The scene as-is shows the problem (SOME portions of the difference inherit the color of the room) the window opening is scaled larger to show that they AREN’T touching. The problem goes away when (in WindowFrameSegment) the 1st occurrence of the applied texture is commented out and the 2nd occurrence is uncommented, and cutaway_textures is commented out.
|
|
118 | Light source | Feature Request | 3.70 beta 37a | Very Low | Low | More efficient handling of fading lights | Tracked on GitHub | |
3.71 release |
Task Description
Currently, fading light sources are used for lighting and shadow calculations even when so far away as to no longer have any effect on the outcome. The proposed solution is to add a new keyword fade_cutoff_distance which tells povray to ignore the light source when alluminating a point at larger distance.
A sample implementation is provided in the attached files. These changes are still based on beta 34 as sources for the current beta are not yet available, and starting to merge changes to beta 35 only at this time didn’t seem worth the effort. Also, please disregard, changes in the CVS header comments (I also use CVS locally for managing source files).
Further considerations regarding this feature:
- For special effects this feature can also be used if the light source does not actually use fading. On the other hand, cutting the light at some distances can be considered an extreme form of fading which may justify the keyword name anyhow.
- Depending on how FS#46 is implemented, the test for cutoff may then be needed at another location as well.
- The default value currently is 0 (or *no* cutoff distance). For #version 3.7 of higher, the default could be chosen automatically based on the light source intensity and adc_bailout, although it may then need to be overriden by the user for extreme pigments.
|
|
127 | Parser/SDL | Feature Request | 3.70 beta 37a | Very Low | Low | Expandable arrays | Tracked on GitHub | |
Future release |
Task Description
Currently, arrays are of a fixed size. You can’t add or remove items to/from an array. I think it would like arrays to be expandable with no fixed and pre-determined size.
|
|
131 | Other | Feature Request | 3.70 beta 37a | Very Low | Low | Ability to change the order of editor tabs by dragging ... | Tracked on GitHub | |
Future release |
Task Description
See Notepad++ or EditPad Lite for examples.
It would be nice to be able to drag tabs in the editor window to change their order, so as to group opened files together by relevance for instance.
|
|
138 | User interface | Feature Request | 3.70 beta 37a | Very Low | Low | "Rename" option in File menu | Tracked on GitHub | |
|
Task Description
Would be great if there were a “Rename” option in the editor File menu to rename the current file name. Otherwise, you have to close the file, rename it in file manager, then open the file again, thus loosing the current tab position and undo history for the file.
|
|
140 | Platform-specific | Feature Request | 3.70 beta 37a | Very Low | Low | "Reload" option in File menu | Tracked on GitHub | |
|
Task Description
Would be great to have a “Reload” option in the File menu to manually reload the current file from disk, discarding all subsequent changes since the last save.
|
|
142 | Texture/Material/Finish | Feature Request | 3.70 beta 37a | Very Low | Low | camera_view pigment from MegaPOV | Tracked on GitHub | |
Future release |
Task Description
I probably don’t have to explain why the camera_view pigment in MegaPOV was important, but I will list some reasons anyway:
1) post-processing could be performed in-scene 2) new types of focal blur effects could be created 3) feedback fractals were possible
I’m sure there are many others, as this is one of those features that has undetermined potential!
|
|
145 | Parser/SDL | Feature Request | 3.70 beta 37a | Very Low | Low | Stack trace report on error | Tracked on GitHub | |
|
Task Description
In other languages if you encounter an error you’ll often be presented with a stack trace showing not only the file and line number the error occurred at, but also any calling functions and _their_ calling functions and so on.
Currently, Povray reports the line number of the error as well as the last five or so lines prior to the error. This is usually OK in simple scenes, but breaks down when you start making use of inclusion and macros.
Let’s say you have a macro located in a file that you then include in your scene. Within your scene you call the macro multiple times, passing input to it. However, by accident you pass _invalid_ input to the macro at some point, resulting in an error when parsing. In this case Povray will report the error as belonging to the macro whereas the actual bug exists in the calling code. If the macro is called more than once in your scene it can be difficult to figure out _which_ instance is the one supplying the bad input.
Not sure how much of this is achievable in Povray.
|
|
151 | Runtime error | Possible Bug | 3.70 beta 37a | Very Low | Low | No way to cancel save while parsing, never ending error... | Tracked on GitHub | |
|
Task Description
On Windows, when I try and save a file while it is being parsed prior to rendering, I get an error, “Failed to save file: The operation completed successfully”, with a single OK button to click. Despite the weird wording, I’m OK with that.
However after clicking OK I get the error, “Failed to save file ‘...’“, with three buttons: Cancel, Try Again, Continue. Not sure what “Continue” means in this context, given that the possibilities would seem to be covered by the other two buttons. Whatever.
Also, sometimes I get a message with only a single “Retry” button. Not sure what the exact message was.
Anyway, the real problem is that, regardless of which button I press, the program continues to spawning the same error message endlessly. Luckily there is a delay between them, but still it would be nice to have at least one of the three buttons *stop* POV-Ray from asking me again.
Also, once the program finishes parsing the file and it becomes possible once again to save the file, it does nothing. I.e. it doesn’t save the file. So what’s the point of the message and all the options? Why not just say, “Unable to save the file, file is parsing” and be done with it?
I think I recall the same behavior in 3.6.2, so it’s nothing new that’s been introduced.
|
|
172 | Image format | Unimp. Feature/TODO | 3.70 beta 39 | Very Low | Low | Re-implement progressive image output | Tracked on GitHub | |
Future release |
Task Description
With previous versions of POV-Ray, it was possible to turn off display output, but still assess the output during render by viewing the output file as it was progressively generated. This allowed e.g. to run a long render on a remote machine as a background process, and check the output from time to time via FTP or similar.
|
|
177 | Light source | Feature Request | 3.70 beta 39 | Very Low | Low | Add support for conserve_energy to shadow computations | Tracked on GitHub | |
|
Task Description
The following scene gives a comparison of current conserve_energy handling in standard shadow computations vs. photons.
Note how the rather highly reflective slabs fail to cast shadows, except where the photons target sphere enforces computation of shadow brightness to be done by the photons algorithm.
For more realistic shadowing without the need to enable photons, I suggest do add proper conserve_energy handling to the shadow computation code (which shouldn’t be too much effort).
global_settings {
max_trace_level 10
photons { spacing 0.003 media 10 }
}
camera {
right x*image_width/image_height
location <-2,2.6,-10>
look_at <0,0.75,0>
}
light_source {
<500,300,150>
color rgb 1.3
photons {
refraction on
reflection on
}
}
sky_sphere {
pigment {
gradient y
color_map {
[0.0 rgb <0.6,0.7,1.0>]
[0.7 rgb <0.0,0.1,0.8>]
}
}
}
plane {
y, 0
texture { pigment { color rgb 0.7 } }
}
#declare M_Glass=
material {
texture {
pigment {rgbt 1}
finish {
ambient 0.0
diffuse 0
specular 0.2 // just to give a hint where the sphere is
}
}
interior { ior 1.0 }
}
#declare M_PseudoGlass=
material {
texture {
pigment {rgbt 1}
finish {
ambient 0.0
diffuse 0.5
specular 0.6
roughness 0.005
reflection { 0.3, 1.0 fresnel on }
conserve_energy
}
}
interior { ior 1.5 }
}
sphere {
<1.1,1,-1.3>, 1
material { M_Glass }
photons {
target 1.0
refraction on
reflection on
}
}
// behind target object
box {
<-0.2,0,-2.3>, <0.0,4,0.3>
material { M_PseudoGlass }
rotate z*1 // just to better see the reflection of the horizon
}
// before target object
box {
<2.4,0,-2.3>, <2.6,4,-0.3>
material { M_PseudoGlass }
photons { pass_through }
rotate z*1 // just to better see the reflection of the horizon
}
|
|
178 | Texture/Material/Finish | Feature Request | 3.70 beta 39 | Very Low | Low | Modify metallic reflection code to better work with con... | Tracked on GitHub | |
|
Task Description
The combination of metallic reflection with conserve_energy causes the reflection to lose colour, as demonstrated by the following scene:
global_settings {
max_trace_level 10
}
camera {
right x*image_width/image_height
location <-2,2.6,-10>
look_at <0,0.75,0>
}
light_source {
<500,300,150>
color rgb 1.3
}
sky_sphere {
pigment {
gradient y
color_map {
[0.0 rgb <0.6,0.7,1.0>]
[0.7 rgb <0.0,0.1,0.8>]
}
}
}
plane {
y, 0
texture { pigment { color rgb 0.7 } }
}
#declare M=
material {
texture {
pigment {rgbt <1.0,0.7,0.2,0.99>}
finish {
ambient 0.0
diffuse 0.5
specular 0.6
roughness 0.005
reflection { 0.8, 1.0 metallic }
conserve_energy
}
}
interior { ior 1.5 }
}
box {
<-0.2,0,-2.3>, <0.0,4,0.3>
material { M }
rotate z*5
rotate x*2
}
|
|
183 | Texture/Material/Finish | Possible Bug | 3.70 beta 40 | Very Low | Low | cutaway_textures broken with child unions | Tracked on GitHub | |
Future release |
Task Description
When using cutaway_textures in a CSG object that has union children, results are not as expected; instead, surfaces in the union children that have no explicit texture will be rendered with the default texture instead. This is not the case for e.g. difference children.
Example:
#default { texture { pigment { rgb 1 } } }
camera {
right x*image_width/image_height
location <0,1.5,-4>
look_at <0,1,0>
}
light_source { <500,500,-500> color rgb 1 }
#declare U = union {
sphere { <0,-0.1,-1>, 0.3 }
sphere { <0, 0.1,-1>, 0.3 pigment { color red 1 } }
}
intersection {
sphere { <0,0,0>, 1 pigment { color green 1 } }
object { U }
cutaway_textures
rotate y*90
}
When declaring U as an intersection instead, the results are as expected, with the surface of the first sphere in U being rendered with the texture defined in the outer intersection.
|
|
196 | Subsurface Scattering | Definite Bug | 3.70 RC3 | Very Low | Low | More SSLT Caveats | Tracked on GitHub | |
Future release |
Task Description
when a prism is differenced with a primitive (cylinder in this case) if sslt is used it causes a seq fault. Reference distribution file logo.inc and the Povray_Logo_Prism definition.
|
|
202 | Geometric Primitives | Definite Bug | 3.70 RC3 | Very Low | Low | Numerical oddities in Julia_Fractal | Tracked on GitHub | |
|
Task Description
I understand that some things have changed in the way certain computations in POV-Ray decide when something is “good enough” and I think this is biting me in Julia_Fractal (where, of course, the highest-resolution computations are needed).
The bug has been posted here:
http://news.povray.org/povray.bugreports/thread/%3Cweb.4dbf2e26b56a53c15b4449250%40news.povray.org%3E/
Including a short .pov file and instructions that reproduce it.
(It pops up in other configurations and view angles as well, but this one captures in in a way that makes it clear it’s a bug: the distance of the camera from the origin appears to change the shape of the rendered object).
This appeared first on a Windows Server 2003 machine, it is apparently confirmable on at least one other system as per that thread.
|
|
205 | Documentation | Unimp. Feature/TODO | 3.70 RC3 | Very Low | Low | Syntax documentation uses inconsistent notation | Tracked on GitHub | |
|
Task Description
The syntax notation used in the main documentation is different than that used in the quick-reference section. This should be changed for consistency, using the superior quick-reference notation throughout.
|
|
206 | Other | Possible Bug | 3.70 RC3 | Very Low | Low | "Cannot open file" error when text output files specifi... | Tracked on GitHub | |
3.71 release |
Task Description
I created an INI file which specifies the Input_File_Name, Output_File_Name, and also the Render_File and the remaining four text outputs as double-quoted absolute paths on my disk. When I run the render, I get the following output:
Preset INI file is ‘C:\USERS\TPREAL\DOCUMENTS\POV-RAY\V3.7\INI\QUICKRES.INI’, section is ‘[512×384, No AA]’. Preset source file is ‘D:\Ruby\POV-Rb\ini\20110521_004037_Noix.ini’. Rendering with 2 threads. - Cannot open file. Render failed - CPU time used: kernel 0.06 seconds, user 0.02 seconds, total 0.08 seconds. Elapsed time 0.52 seconds.
And the render does not start. The five text output files are not even created, and where the output image should be, there is a file with extension pov-state. The render works as it should only when I remove all five lines defining the five text output files. The paths I specify for the files are correct (paths exist and files do not, no white-spaces or anything), read/write restrictions are disabled in POV-Ray. This used to work in 3.6 and does not work now in 3.7 RC3. The error happens no matter if I run the render using GUI or command line.
(Also please note that the error message is really not useful here, it does not say which file it failed to open, and not even if it was an attempt to open for read or for write.)
I’d be really glad if you could correct this as it’s a critical functionality for me. I’m generating the POV-Ray code automatically and I need to parse the text output automatically to return the status to the generator.
|
|
222 | Geometric Primitives | Definite Bug | 3.70 RC3 | Very Low | Low | incorrect render of CSG merge with radiosity | Tracked on GitHub | |
Future release |
Task Description
The problem arises when I am trying to trace a radiosity scene without conventional lighting that has a GSG merge object. There are a coincident surfaces, but these surfaces are first merged, then the texture applied. The texture is a simple solig color non-transfluent pigment, default normal, default finish etc..
Problem consists when adding antialiasing, changing resolution, changing camera view-point etc.; when I replace merge with union, the problem disappeared.
The scene was checked on two different machines with different versions of POV-Ray:
Gentoo Linux, kernel 2.6.39-r3, i686 Intel(R) Xeon(TM) CPU 2.80GHz GenuineIntel, 2G RAM (this is Dell PowerEdge 2650 server with 2 dual-core Intel Xeon MP processors); Persistence of Vision™ Ray Tracer Version 3.7.0.RC3 (i686-pc-linux-gnu-g++ 4.5.3 @ i686-pc-linux-gnu)
Gentoo Linux, kernel 2.6.37-r4, x86_64 AMD Athlon™ X2 Dual Core Processor BE-2350, 2G RAM (non-branded machine); Persistence of Vision™ Ray Tracer Version 3.6.1 (x86_64-pc-linux-gnu-g++ 4.4.4 @ x86_64-pc-linux-gnu)
(scene has been adapted slightly to be rendered with 3.6, the adaptation was to change “emission” with “ambient” and replace gamma “srgb” with “2.2”)
Both machines generate similar images.
The attachment is an archive containing sources of minimal scenes with these problems, and sample pictures I generated from them on my machines.
|
|
226 | Geometric Primitives | Possible Bug | 3.70 RC3 | Very Low | Low | Near-coincident surface accuracy | Tracked on GitHub | |
|
Task Description
This is a transparent box very close to a plane.
box {
-1, 1
pigment { rgbf <0, 0, 1, 1> }
}
plane {
#if (version < 3.7)
y, -1.0000007
#else
y, -1.00007
#end
pigment { rgb 1 }
finish { ambient 1 }
}
camera {
location <1, 2, 3>
look_at 0
}
The box is placed 100 times closer to the plane for 3.6, but both 3.6 and 3.7 produce exactly the same black artifact (attached).
So apparently 3.7 is less accurate. (And the exact factor 100 feels suspicious.)
|
|
229 | Image format | Feature Request | 3.70 RC3 | Very Low | Low | Clock value into EXIF data for PNG | Tracked on GitHub | |
|
Task Description
The best time for a picture....
I set the day time and so the position of the sun by “clock=”
Normal I document my source very good, but this time, I forgot the clock seting for the picture of my book cover.
So I would find it very practicall to put the clock value and other setings for rendering into EXIF data of the picture.
|
|
230 | User interface | Feature Request | 3.70 RC3 | Very Low | Low | Improved handling of animations | Tracked on GitHub | |
|
Task Description
October to middle November, I prodduced a 5 minutes video mainly py POVRAY.
Here a part of the video.ini file
#
# szenes based on games.pov #
#game-pat #Initial_Frame=450 - time scale 1000 - 30 seconds #Final_Frame=899 #Initial_Clock=-12500 #Final_Clock=17500
#game-lost - time scale 1000 - 22 seconds #Initial_Frame=0 #Final_Frame=659 #Initial_Clock=2000 #Final_Clock=24000
#game-lost - time scale 3000 - 12 seconds - fast through the night #Initial_Frame=0 #Final_Frame=359 #Initial_Clock=24000 #Final_Clock=60000
#book-cover #clock=64000
#game-sunrise - time scale 1000 - 35 seconds #Initial_Frame=0 #Final_Frame=1049 #Initial_Clock=60000 #Final_Clock=95000
Now imagine all the problems:
One computer crashes often because of thermal problems. Last picture rendere 487.
Now calculate the setings, that this computer continues the task at 487
Or 2 computers should render a scene.
Sounds very easy. Something like computer 1 makes 0..499 computer 2 makes 500..999.
But the computers are different in speed and the pictures are very different in computation time.
So it would be best
computer 1: 0 to 999 computer 2: 999 to 0
They would meet in the middle, where ever this middle is.
So it would be much easier with
#game-sunrise - time scale 1000 - 35 seconds Initial_Frame=0 Final_Frame=1049 Initial_Clock=60000 Final_Clock=95000 Initial_Task=487 Final_Task=1049
So I have not to calculate the exact clock seting, when a computer sould continue a task after crashing at picture 487
#game-sunrise - time scale 1000 - 35 seconds Initial_Frame=0 Final_Frame=1049 Initial_Clock=60000 Final_Clock=95000 Initial_Task=1049 Final_Task=0
This would be the reverse calcualtion order. Starting with picture 1049 and going down 1048..1047
|
|
240 | Geometric Primitives | Feature Request | 3.70 RC3 | Very Low | Low | Object for efficient automatic periodic pavement | Tracked on GitHub | |
|
Task Description
Whenever some object is to be periodically repeated in some kind of grid, you can achieve this with macros, but it a) wastes a lot of resources
even if object references are implemented in the future, wrapper with its own transformation matrix still takes space and bookkeeping
b) is not infinite
annoying when making infinite planar tiling with arbitrary objects
like an approximate water surface or tiling with real bricks
or anything that needs to extend to horizon
c) is not optimized for periodicity
I think it can be very efficiently implemented as an object that takes a finite object argument (like CSG functions) and can be periodic in either 1D,2D or (possibly dangeorous?) 3D with specified period. In each dimension, the number of repetitions can be any integer or even infinity (or max_int). Something like periodicity <2,2,Infinity> 2 copies in 1 direction, 2 in the other, infinite in the third grid_separation <1,2,2> 1 unit size in first direction, 2 unit sizes in the other two
All the code needs to do is raytrace in the current unit cell and if the ray passes uninterrupted, pass it through the neighbouring unit cell (which means trace a translated ray through the same object). The object itself would just feel an additional clipping box, everything else would work seamlessly.
In case of infinite column of transparent object, max_trace stops the infinite loop anyway.
This is just a suggestion, I realize this is more of a long-term change but it is quite easy to implement and would simplify a large number of projects.
|
|
246 | Other | Possible Bug | 3.70 RC6 | Very Low | Low | Regression on scale limit between 3.7 and previous rele... | Tracked on GitHub | |
|
Task Description
From Thomas de Groot
Using the following code for a (sky) sphere in a scene, with light source well outside the sphere; works correctly until the above scale value. Use a value of >=100*10e4 and the sphere becomes black.
#version 3.7;
global_settings{ assumed_gamma 1.0 }
#declare T_sky =
texture {
pigment {
gradient y
pigment_map {
[0.0 srgb <1.0,0.7,0.6>*1 transmit 0.5]
[1.0 srgb <0.8,0.1,0.0>*1 transmit 0.5]
}
}
finish {
emission 0.9
diffuse 0.0
}
}
#declare T_cosmos =
texture {
pigment {
color rgbt <0,0,0,1>
}
finish {
ambient 0.0
diffuse 0.0
}
}
sphere {
<0,0,0>,1
texture {T_sky}
interior_texture {T_cosmos}
no_shadow
no_reflection
inverse
scale 99.9*10e4
}
Working with windows version of POV-Ray and Win7 x64
Is this normal for version 3.7 RC5? I seem to remember that with lower versions of POV-Ray on could go at least to 10e6. Especially with the Ringworld scenes back in 2010 the scales used where much larger without any black out.
I can indeed confirm that the Ringworld scene does not render correctly anymore, with identical black out.
|
|
248 | Parser/SDL | Feature Request | Not applicable | Very Low | Low | Implement mechanism to compute direction of a spline | Tracked on GitHub | |
Future release |
Task Description
The SDL currently provides no way to compute the exact direction of a spline at a given location, even though mathematically this is a piece of cake: The first-order derivative of any spline section gives you the “speed” as a vector function, and is trivial to compute for polynomial splines (which are behind all spline types that POV-Ray supports); the normalized “speed” vector, in turn, gives the “pure” direction.
For exact direction/speed computations, I propose to extend the SDL invocation syntax as follows to allow for evaluating a spline’s derivative:
SPLINE_INVOCATION:
SPLINE_IDENTIFIER ( FLOAT [, SPLINE_TYPE] [, FLOAT] )
or
SPLINE_INVOCATION:
SPLINE_IDENTIFIER ( FLOAT [, FLOAT] [, SPLINE_TYPE] )
where the second FLOAT will specify the order of derivative to evaluate (defaulting to 0). In order to compute the position, direction, and acceleration of an object traveling along a certain spline, one could then for instance use:
#declare S = spline { ... }
#declare Pos = S(Time);
#declare VSpeed = S(Time,1);
#declare VAccel = S(Time,2);
#declare Dir = vnormalize(VSpeed);
#declare Speed = vlength(VSpeed);
#declare AccelDir = vnormalize(VAccel);
#declare GForce = vlength(VAccel) / 9.81;
Alternatively, a mechanism may be devised to create a spline representing another spline’s derivative; however, it would be debatable whether the syntax should be parameter-like (being an added information that could be overridden again when creating other splines from such a derived spline), or operation-like (converting the spline), and in the latter case how it should affect spline type (and consequently control points); so the spline invocation parameter approach might be more straightforward, with less potential surprises for the user.
|
|
252 | Photons | Definite Bug | 3.70 RC6 | Very Low | Low | photons and light_group is broken | Tracked on GitHub | |
|
Task Description
photons are not working when used with a light_group. verified in NG posting in p.general a simple scene file is attached.
|