POV-Ray

The Persistence of Vision Raytracer (POV-Ray).

This is the legacy Bug Tracking System for the POV-Ray project. Bugs listed here are being migrated to our github issue tracker. Please refer to that for new reports or updates to existing ones on this system.

IDCategoryTask TypeReported InPrioritySeveritySummaryStatusProgress  ascDue In Version
79Source codeFeature Request3.70 beta 35aVery LowLowFull-Featured Test-Scene to check the correctness of po...Tracked on GitHub
0%
Future release Task Description

Hi,

it would be nice if there exists a test scene (not a benchmark) which has a high coverage of povray source and can be used as correctness validation of povray. It schould be produce an image which can be compared to a golden reference image.

It may be also possible to create a regression test suite which does automatic comparision of the render results.

91Texture/Material/FinishFeature Request3.70 beta 36DeferLowSlope pattern applied to object is not transformed afte...Tracked on GitHub
0%
Future release Task Description

There is an big issue with the slope pattern: when the object it is applied to is instanced (again) with a transformation (in particular a rotation, as a translation would not impact.. but a shear might), the colours of the surfaces are changed.

  
object { p translate -5*x }
object { p rotate 220*y+20*x    translate 3*x }       

Nobody would expect the object to be different in appearance.
If slope {} is replaced with wood, all is fine. (as for others textures, i guess)

IMHO, the slope vector need to be adjusted for the later transformation(s) (so as to compensate the issue of using the Perturbed Normal vector).

This should not impact the AOI/FACING (experimental) patterns, as AOI definition is pretty clear about duplicating & transform if you think about it a bit, as well as FACING: for these two, it is expected to either use the ray(current point of view) or a fixed 3D point as reference. At the limit, discussion about moving the 3D point of FACING might also be opened to interpretation.

AOI/FACING are in task #19

99Refactoring/CleanupUnimp. Feature/TODO3.70 beta 36DeferVery LowRefactor engine (front- & back-end) code for Unicode su...Tracked on GitHub
0%
Future release Task Description

Front- & Back-end code should be refactored for full Unicode support in scene files and strings.

81Geometric PrimitivesDefinite Bug3.62Very LowMediumsphere_sweep generating artifactsTracked on GitHub
0%
Task Description

I’m running POV-Ray for (64 bit) Windows v3.62 on (64 bit) Windows Vista

This pov file:


#include "colors.inc"
#include "metals.inc"

light_source { <6, 9, -21> color White }
camera { location <0, 0, -3> look_at <0, 0, 0> }

sphere_sweep {
                cubic_spline
                6
                <-2.0, 0, 0> 0.05

                <0.000,0,0> 0.2
                <0.025,0,0> 0.2
                <0.050,0,0> 0.2
                <0.075,0,0> 0.2

                <3.0,0,0> 0.2
                pigment { color White }
}

Produces two strange artifacts: A disk at the center of the sweep, and a faint “halo” or veil which shows as 4 faint hyperbolas centered around the origin.

I have tried tweaking tolerance (for no other reason than I saw that someone else was tweaking it to solve a problem) but this does not seem to change things.

For a look at MY result when I run this, view this image:

riventree.comarchivebugdatapovrayspheresweepartifacts.jpg

Alain reports the same behavior in the latest version: “It’s still there with the latest version: 3.7 beta 35a.” This MAY move the status to “confirmed”, but I can’t do that

Someone else says that changing the scale (!) “solves” the problem by moving the disk and the halo offscreen, but that sounds like a bad idea to me.

-Jeff Evarts, first-time POVRay bug reporter

60Geometric PrimitivesDefinite Bug3.70 beta 34Very LowMediumArtifacts using prism in CSGTracked on GitHub
0%
Future release Task Description

Using prisms in intersecion or difference CSG objects may cause artifacts in POV-Ray 3.6.2 as well as 3.7.0.beta.34, as demonstrated by the following code:


camera {
  right    -x
  up        y*image_height/image_width
  location  <-24,19,12>
  look_at   <0,0,0>
}

light_source { <100,200,100> color rgb 1 }

plane { y, -2 pigment { color rgb 1 } }


#declare KeyValue = 1.366; // pick any you like

difference {
  prism {
    linear_sweep -0.5,0.5, 4
    
    <-3,20-17>,
    <-3,KeyValue>,
    <-6,-3>,
    <-0,-5>
  }
  intersection {
    cylinder { <-7,-0.51,1>, <-7, 0.51,1>, 4.0 }
    plane { z, KeyValue }
  }
  pigment { color rgb 0.5 } 
}

Apparently the surface of the other object becomes visible when it exactly coincides with a vertex of the prism; probably there is a failure of the inside() test for such values.

65Parser/SDLFeature Request3.70 beta 34Very LowLowAdd support for vectors with functionsTracked on GitHub
0%
Future release Task Description

Being able to have functions operate on vectors would be pretty nice to have.

70PhotonsUnimp. Feature/TODO3.70 beta 34LowHighload/save photons should be controlled via command lineTracked on GitHub
0%
Task Description

Just like radiosity load/save, the photon mapping load/save mechanism should be moved to the frontend and controlled via command-line switch, instead of being SDL-driven in the backend.

71User interfaceUnimp. Feature/TODO3.70 beta 34Very LowLowraise warning when command line option has no effectTracked on GitHub
0%
Task Description

Warnings should be raised when a command line option has no effect,
for example...

pvengine +am

is legal, but without the number after it, it has no effect.

pvengine +am7

should be an error, and also raises no warnings.

85OtherFeature RequestNot applicableDeferLowAspect ratio issuesTracked on GitHub
0%
Future release Task Description

Background

When rendering an image, there are actually three aspect ratios involved:

1) The aspect ratio of the camera, set with the up and right vectors.

2) The aspect ratio of the rendered image, set with the +W and +H parameters.

3) The aspect ratio of the pixels in the intended target medium. While this is very often 1:1, it’s definitely not always so (anamorphic images are common in some media, such as DVDs).

The aspect ratio of the camera does not (and arguably should not, although some people might disagree) define the aspect ratio of the image resolution, but the aspect ratio of the image as shown on the final medium. In other words, it defines how the image should be displayed, not what the resolution of the image should be.

This of course means that the aspect ratio of the target medium pixels has to be taken into account when specifying the image resolution. If the target medium pixels are not 1:1 (eg. when rendering for a medium with non-square pixels, or when rendering an anamorphic image eg. for a DVD), the proper resolution has to be specified so that the aspect ratio of the displayed image remains the same as the one specified in the camera block.

This isn’t generally a problem. It usually goes like “my screen is physically 4:3, so I design my scene for that aspect ratio, but the resolution of my screen is mxn which is not 4:3, but that doesn’t matter; I just render with +Wm +Hn and I get a correct image for my screen”.

However, problems start when someone renders an image using an image aspect ratio / pixel aspect ratio combination which does not match the camera aspect ratio. By far the most common situation is rendering a scene with a 4:3 camera for a screen with square pixels but with a non-4:3 resolution (most typically 16:9 or 16:10 nowadays). The image will be horizontally
stretched.

In a few cases the effect is the reverse: The scene (and thus the camera) has been designed for some less-typical aspect ratio, eg. a cinematic 2.4:1 aspect ratio, but then someone renders the image with a 4:3 resolution. The resulting image will be horizontally squeezed.

In a few cases this is actually the correct and desired behavior, ie. when you are really rendering the image in an anamorphic format (eg. for a DVD). However, often it’s an inadverted mistake.

Some people argue that this default behavior should be changed. However, there are also good arguments why it should not be changed. Some argue that POV-Ray should have more features (at the SDL level, at the command-line level or both) to control this behavior.

There are several possible situations, which is why this issue is so complicated. These situations may include:

- The scene author doesn’t really care what aspect ratio is used to render the image, even if it means that additional parts of the scenery become visible or parts are cropped away when using a different aspect ratio than what he used.

In this case the choice of camera aspect ratio should be up to the person who renders the image, and thus selectable on the command-line. However, he should have an easy choice of how changing the aspect ratio affects the image: Should it extend the viewing range, or should it crop part of it, compared to the original?

And this, of course, while still making it possible to render for an anamorphic format.

- The author wants to support different aspect ratios, but he wants to control precisely how it affects the composition of the image. Maybe he never wants anything cropped away within certain limits, but instead the image should always be extended in whichever direction is necessary due to the aspect ratio. Or maybe he wants to allow cropping the image, but only up to a certain point. Or whatever.

In this case the choice of camera aspect ratio should be up to the author, and thus selectable in the scene file, while still allowing some changes from the command-line.

- The author designed his scene for a precise aspect ratio and nothing else, and doesn’t want the image to be rendered in any other aspect ratio. Maybe he used some very peculiar aspect ratio (eg. something like 1:2, ie. twice as tall as wide) for artistic composition reasons, and wants the image rendered with that aspect ratio, period.

Perhaps the author should be able to completely forbid the change of camera aspect ratio in the command-line.

Of course anamorphic rendering should still be supported for targets with a different pixel aspect ratio.

Possible solution

This solution does not necessarily address all the problems described above perfectly, but could be a good starting point for more ideas:

Add a way to specify in the camera block minimum and maximum limits for the horizontal and vertical viewing angles (and if any of them is unspecified, it’s unlimited). Of course for this to be useful in any way, there should also be a way to change the camera and pixel aspect ratios from the command line.

The idea with this is that the author of the scene can use these angle limits to define a rectangular “protected zone” at the center of the view, using the minimum angle limits. In other words, no matter how the camera aspect ratio is modified, the horizontal and/or vertical viewing angles will never get smaller than these minimum angles. This ensures that the image will never be cropped beyond a certain limit, only extended either horizontally or vertically to ensure that the “protected zone” always remains fully visible regardless of what aspect ratio is used.

The maximum angles can be used for the reverse: They ensure that no scenery beyond a certain point will ever become visible, no matter what aspect ratio is used. This can be used to make sure that unmodelled parts of the scene never come into view. Thus the image will always be cropped to ensure this, depending on the aspect ratio.

I’m not completely sure what should be done if both minimum and maximum angles are specified, and the user specifies an aspect ratio which would break these limits. An error message could be a possibility. At least it would be a way for the author to make sure his scene is never rendered using an aspect ratio he doesn’t want. He can use these angle limits to give some leeway how much the aspect ratio can change, to an extent, or he could even force a specific aspect ratio and nothing else (by specifying that both the minimum and maximum angles are the same).

So in short:

- Add a “minimum/maximum horizontal/vertical angles” feature to the camera block. These can be used to define a “protected zone” in the image which must not be breached by command-line options.

- Add a command-line syntax to change the camera aspect ratio (which automatically obeys the “protected zone” settings). Could perhaps give an error message if the command-line options break the limits in the scene camera.

- Add a command-line syntax to specify a pixel aspect ratio other than 1:1. This can be used to render anamorphic versions of the image on purpose (iow. not by mistake).

This can probably be made backwards-compatible in that if none of these new features are used, the behavior could be the same as currently (or at least similar).

86Parser/SDLFeature RequestNot applicableDeferVery LowAdd support for more RNG typesTracked on GitHub
0%
Future release Task Description

The current 32-bit linear congruential generator used as RNG in POV-Ray is sometimes quite limited for some purposes and in a few cases its poor quality shows up (as has been demonstrated more than once in the newsgroup). Thus it would be nice if POV-Ray offered additional, higher-quality random number generators, besides the current one (which should probably remain for backwards compatibility). These RNGs could include algorithms like the Mersenne Twister and the ISAAC RNG, both of which have very decent quality and have an enormous periods (while at the same time being very fast).

After a long discussion, the following syntax for specifying the RNG type and seed (which may be larger than 32 bits) has been suggested:

seed(<value>) | seed(<type>, <value> [, <values>])

For example:

#declare Seed1 = seed(123); // Use the current RNG, with seed 123
#declare Seed2 = seed(1, 123); // Identical to the previous one
#declare Seed3 = seed(2, 456, 789, 123); // Use RNG algorithm #2,
                                         // with a large seed (96 bits specified here)

A C++ implementation of the ISAAC RNG can be found at http://warp.povusers.org/IsaacRand.zip

87Geometric PrimitivesFeature RequestNot applicableDeferVery LowAdd new feature: Reference objectTracked on GitHub
0%
Future release Task Description

When you instantiate an object several times, eg:

object { MyObj translate -x*10 }
object { MyObj translate x*10 }

POV-Ray will copy that object in memory, at least for most types of objects. Not for all of them, though. Most famously if MyObj is a mesh, it won’t be copied, but only a reference to the original will be used, thus saving memory. (There are a few other primitives which also don’t cause a copy, such as bicubic_patch and blob, but those are naturally not so popular as mesh, so it’s a less known fact.)

AFAIK the reason why referencing (rather than copying) is not used for all types of objects is rather complicated, and mostly related to how transformations are applied to these objects. For example if the object being instantiated is a union, the translates above will be (AFAIK) applied to the individual members of the union rather than to the union object itself.

Copying, however, can be quite detrimental in some situations. For example if you have a huge union, and you want to instantiate it many times, the memory usage will be that many times larger (compared to just one instance). This is sometimes something which the user would not want, even if it made the rendering slightly slower as a consequence. (In other words, better to be able to render the scene in the first place, rather than running out of memory.)

Redesigning POV-Ray so that all objects would be referenced rather than copied would probably be a huge job, and in some cases a questionable one. There probably are situations where the current method really produces faster rendering times, so redesigning POV-Ray so that it would always reference instead of copy, could make some scenes render slower.

So this got me thinking about an alternative approach: How hard would it be to create a special object which sole purpose is to act as a reference to another object, without copying it? This special reference object would act as any regular object, would have its own transformation matrix and all that data related to objects, but its sole purpose is to simply be a “wrapper” which references an existing object. It could be, for example, like this:

object_ref { MyObj translate -x*10 }
object_ref { MyObj translate x*10 }

The end result would be exactly identical as earlier, but the difference is that now MyObj behaves in the same way as a mesh (in the sense that it’s not instantiated twice, but only once, even though it appears twice in the scene), regardless of what MyObj is.

In some cases this might render slightly slower than the first version (because POV-Ray has to apply the transformations of the object_ref first, after which it applies whatever transformations are inside MyObj), but that’s not the point here. The point is to save memory if MyObj is large.

An object_ref would behave like any other object, so you could do things like:

#declare MyObjRef = object_ref { MyObj };

object { MyObjRef translate -x*10 }
object { MyObjRef translate x*10 }

(The only thing being instantiated (and copied) here is the “MyObjRef” object, not the object it’s referring to, so that actual object is still stored in memory only once.)

In some situations it might even be so that referenced objects actually render faster than if the objects were copied because references increase data locality, lessening cache misses.

I believe this could be a rather useful feature and should be seriously considered, unless there are some major obstacles in implementing it.

96Texture/Material/FinishFeature RequestNot applicableVery LowLowUser-defined warpsTracked on GitHub
0%
Future release Task Description

User-defined warps would be nice to have, something along the lines of:

warp {
  function { MyFnX(x,y,z) } // function to compute pattern-space x-coordinate from object-space <x,y,z> coordinate
  function { MyFnY(x,y,z) } // ditto for pattern-space y coordinate
  function { MyFnZ(x,y,z) } // ditto for pattern-space z coordinate
}

// a displacement warp:
warp {
  function { x + MyFnX(x,y,z) }
  function { y + MyFnY(x,y,z) }
  function { z + MyFnZ(x,y,z) }
}
248Parser/SDLFeature RequestNot applicableVery LowLowImplement mechanism to compute direction of a splineTracked on GitHub
0%
Future release Task Description

The SDL currently provides no way to compute the exact direction of a spline at a given location, even though mathematically this is a piece of cake: The first-order derivative of any spline section gives you the “speed” as a vector function, and is trivial to compute for polynomial splines (which are behind all spline types that POV-Ray supports); the normalized “speed” vector, in turn, gives the “pure” direction.

For exact direction/speed computations, I propose to extend the SDL invocation syntax as follows to allow for evaluating a spline’s derivative:

    SPLINE_INVOCATION:
        SPLINE_IDENTIFIER ( FLOAT [, SPLINE_TYPE] [, FLOAT] )

or

    SPLINE_INVOCATION:
        SPLINE_IDENTIFIER ( FLOAT [, FLOAT] [, SPLINE_TYPE] )

where the second FLOAT will specify the order of derivative to evaluate (defaulting to 0). In order to compute the position, direction, and acceleration of an object traveling along a certain spline, one could then for instance use:

    #declare S        = spline { ... }
    #declare Pos      = S(Time);
    #declare VSpeed   = S(Time,1);
    #declare VAccel   = S(Time,2);
    #declare Dir      = vnormalize(VSpeed);
    #declare Speed    = vlength(VSpeed);
    #declare AccelDir = vnormalize(VAccel);
    #declare GForce   = vlength(VAccel) / 9.81;

Alternatively, a mechanism may be devised to create a spline representing another spline’s derivative; however, it would be debatable whether the syntax should be parameter-like (being an added information that could be overridden again when creating other splines from such a derived spline), or operation-like (converting the spline), and in the latter case how it should affect spline type (and consequently control points); so the spline invocation parameter approach might be more straightforward, with less potential surprises for the user.

282Image formatFeature RequestNot applicableDeferLowUnrendered region should be transparent, not blackTracked on GitHub
0%
Future release Task Description

When rendering only a region of a file, using the command-line options +sc/+sr/+ec/+er, the area of the image that is excluded comes out as black in the final PNG.

Expected behaviour is for it to be transparent.

6Subsurface ScatteringUnimp. Feature/TODO3.70 beta 32DeferLowIntegrate Subsurface Scattering with PhotonsTracked on GitHub
0%
Future release Task Description

Subsurface scattering must be made photon-aware.

7RadiosityUnimp. Feature/TODO3.70 beta 32LowMediumRe-implement Radiosity render abort/continue supportTracked on GitHub
0%
Task Description

For proper render abort/continue support, radiosity cache data must be written to (or read from) disk even if the user does not explicitly opt to have a sample data file written/read. This feature has temporarily been dropped from 3.7 beta and is still pending re-implementation.

To meet high-reproducibility requirements in conjunction with SMP operation, it may be necessary to extend the 3.6 radiosity cache file format.

8RadiosityUnimp. Feature/TODO3.70 beta 32DeferLowImprove Radiosity "Cross-Talk" Rejection in CornersTracked on GitHub
0%
Future release Task Description

Near concave edges, radiosity samples may be re-used at a longer distance away from the edge than towards the edge; there is code in place to ensure this, but it only works properly where two surfaces meet roughly rectangularly, while failing near the junction of three surfaces or non-rectangular edges, potentially causing “cross-talk”.

It should be investigated how the algorithm can be improved or replaced to better cope with non-trivial geometry.

20User interfaceFeature Request3.70 beta 32Very LowVery Lowrender window behaviorTracked on GitHub
0%
Task Description

When changing the behavior of the render window, “Keep above main”, requires restarting the POV editor to take effect. It would be nice either to get a warning to restart, or to get it to work without restarting.

27OtherFeature Request3.70 beta 32Very LowLowAdd texture support to background statementTracked on GitHub
0%
Future release Task Description

Adding full texture statement support to the background statement (with a scale of 1/1) aligned with the image_map direction of an image would allow i.e. specifying an image as background easily.

28FrontendFeature Request3.70 beta 32Very LowLow#debug message not displayed.Tracked on GitHub
0%
Future release Task Description

The #debug message stream is only being flushed when it hits a newline character,
instead of after each #debug statement. This means that some final strings don’t show up.

#debug "This line prints,\n but this line doesn't."
41OtherFeature Request3.70 beta 32Very LowLowimprove command-line parsing error messagesTracked on GitHub
0%
Task Description

POV-Ray 3.6, upon encountering problems when parsing command line and/or .ini file options, would quote the offending option in the error message.

POV-Ray 3.7 currently just reports that there is some problem with the command line, without providing any details. I suggest changing this, as the information may be helpful at times.

42OtherDefinite Bug3.70 beta 32Very LowMediumcommand line parameters are not parsed properly on UnixTracked on GitHub
0%
Task Description

POV-Ray does not follow common practice on command-line handling; for instance:

povray +i"My File"

entered on a Unix shell would be passed to POV-Ray as

povray
+iMy File

(each line representing a distinct parameter here), which POV-Ray would further dissect, interpreting it as

povray
+iMy
File

To achieve the desired effect, one would actually have to quote the string twice:

povray +i"'My File'"

which the shell would translate to

povray
+i'My File'

which POV-Ray would interpret as

povray
+iMy File

In both cases, this is obviously not what a Unix user would expect.

The further dissecting of individual command-line parameters may have had its valid roots in the peculiarities of DOS’ command-line handling, but to my knowledge all major contemporary operating systems follow a concept akin to Unix, passing a list of parameters instead of a monolithic command line, and burdening the respective command shells with the task of dissecting command lines into parameters.

Therefore I suggest to disable this anachronistic feature in favor of contemporary standards; a compiler flag might be used to allow for easy re-enabling of the feature, for compiling POV-Ray on exotic targets.

- edit -

It has been pointed out that the described behaviour differs from 3.6, so I’m promoting this to a bug and changing the title.

47PreviewPossible Bug3.70 beta 32Very LowLowRender Preveiw window can become disabledTracked on GitHub
0%
Task Description

If a render is continued with the +c option and the render had completed, the render preview window will disappear and the show/hide render window button will be grayed. Even after the scene is modified and the command line options have been changed, the show/hide button will still be grayed.

Opening or changing to another scene and rendering will not restore the button, nor will rendering with +d. However, if a trace is started using -d, halted, then continued using +d (or allowed to finish completely with -d and a new one is started using +d), then the preview window is restored.

This behavior is different from 3.6.1, which correctly always showed the preview window (since +d is default) unless -d was specified.

50Runtime errorPossible Bug3.70 beta 32Very LowMediumFrequent segfaults with photon scenesTracked on GitHub
0%
Task Description

I observe frequent segfaults with POV-Ray 3.7 betas when rendering scenes using photons:

  • Debian Linux 4.0r5 “etch” for AMD64
  • AMD Phenom X4 9650 2.3GHz, 6 GB RAM
  • POV-Ray compiled with Intel icpc 11.0

Segfaults are sporadic but frequent (occurring in roughly 50% of all photon renders).

58Parser/SDLUnimp. Feature/TODO3.70 beta 32DeferLowallow SDL code to detect optional featuresTracked on GitHub
0%
Task Description

Some features are optional in custom builds of POV-Ray (I’m thinking about OpenEXR in particular); it would be nice to have a syntax for an SDL script to check for support of such features, so it may take some fallback action if the feature is not supported.

44RadiosityFeature RequestAllVery LowLowImprove Normals Handling in RadiosityTracked on GitHub
0%
Future release Task Description

Currently, radiosity does not make use of the fact that pertubed normals would theoretically just require a different weighting of already-sampled rays, leading to the following issues:

  • Honoring normal pertubations in radiosity leads to an increased number of samples, slowing down sample cache lookup.
  • The increased number of samples is generated from a proportionally higher number of sample rays, slowing down pretrace even further.
  • Low-amplitude pertubations tend to be smoothed out; “reviving” these is only possible by increasing the general sample density.
  • Handling of multi-layered textures with different normal pertubations is currently poorly implemented.

As a solution, I propose to store for each radiosity sample not only the resulting illumination for a perfectly unpertubed normal, but from the same set of sample rays also compute the illumination for an additional set of about a dozen standardized pertubed-normal directions, and interpolate among these when computing the radiosity-based illumination for a particular point that has a pertubed normal.

For backwards compatibility, this method of dealing with pertubed normals in radiosity might be activated by a different value for the “normal” statement in the radiosity block, say, “normal 2”.

242OtherFeature RequestAllDeferVery LowAlgorithm to fix the so-called shadow line artifactTracked on GitHub
0%
Task Description

The so-called shadow line artifact (http://wiki.povray.org/content/Knowledgebase:The_Shadow_Line_Artifact) which affects objects with a ‘normal’ statement as well as smooth meshes and heightfields can be really annoying sometimes. Currently the only way to remove it is to make the object shadowless, which isn’t a good solution except in very special cases.

This algorithm could remove the artifact: If the actual normal vector of the object points away from the light source (its dot-product with the light vector is negative) but the perturbed normal points towards it (dot-product positive), then ignore the first shadow-test intersection with the object itself.

There are alternative ways of implementing an equivalent functionality:

- Don’t check the condition (if it’s too difficult to check due to how the code is designed) but always ignore the first intersection with the objects itself. This will work properly with closed surfaces but not with open ones, so it might need to be a feature for the user to turn on with a keyword (similar to eg. ‘double_illuminate’).

- Alternatively, don’t ignore the first intersection, but instead ignore the “opposite side” of the object’s surface (again, possibly only if a keyword has been specified). In other words, if we are rendering the outer side of the object, ignore its inner side when shadow-testing, and vice-versa.

- Perhaps simply add a feature to make surfaces one-sided (similarly to how they can be made so in OpenGL and similar scanline rendering systems). In other words, the inner side of a surface is completely ignored everywhere, making the object virtually invisible from the inside. The advantage of this feature would be that it can have uses other than simply removing the shadow line artifact.

243Geometric PrimitivesUnimp. Feature/TODOAllDeferLowSphere sweep behaves wrong when scaledTracked on GitHub
0%
Future release Task Description

The sphere_sweep renders well when specified directly, but when it is scaled, its bounding box is calculated incorrectly, which clips the object so it almost disappears.

The effect is present for all three types of splines.

I’m attaching a test scene and the rendering result. The saving of the object with #declare has no effect, I just wanted to show both transformed and untransformed version.

I don’t think this issue is related to other artifacts occuring with sphere_sweep, as it is obviously an issue of the internal bounding box.

245OtherFeature RequestAllDeferLowPOVMS message queue can fill up with GB of data for ver...Tracked on GitHub
0%
Future release Task Description

With very fast renders and very large output files, the message queue can fill up because the producers are not limited by IO, while the consumer performance is limited by disk IO. Consequently, the message queue can fill up to exhaust all available memory. The solution is to build in some better control of pending output data in the message queue on the producer side. This will also pave the way for message communication over slow links (i.e. a network).

311User interfacePossible Bug3.70 releaseVery LowLowElepsed time error on very long rendersTracked on GitHub
0%
3.71 release Task Description

On a very long render, around day 24, the elapsed time display becomes incorrect, showing 4294967272d 4294967272h 4294967272m 4294967272s.

Found on Windows 7 64 bits and reproduced on Windows 7 32 bits.
NOT reported on other platforms.

319Texture/Material/FinishFeature Request3.70 releaseVery LowLowAdd interior to #default directiveTracked on GitHub
0%
Task Description

When working with predefined materials, it would be useful to have something like:

#if (!Use_photons)
  #default { interior { caustics 1 } }
#end

#include "my_predefined_materials.inc"

Default medias or IORs could also be useful.

323User interfacePossible Bug3.70 releaseVery LowVery LowTooltip for render speed status bar has wrong unitTracked on GitHub
0%
Task Description

Tooltip popup for render speed always displays as “Pixels per Second” rather than matching status bar. I’ve noticed it in 3 renders so far. Most of my renders are fast enough not to see any other unit besides PPS, but I should be able to reproduce again if necessary.

324Geometric PrimitivesDefinite Bug3.70 releaseVery LowHigh3.7 mesh2 rendering artifact, regression from 3.6Tracked on GitHub
0%
Task Description

Povray 3.7 has rendering artifact in meshes with polygons that meet at shallow angles. Please see the attached file.

The part of concern is the mesh2, which produces the partly-transparent faces of a shallow pyramid. The file result-3_6.png shows the output of povray-3.6, and the file result-3_7.png shows the output of povray-3.7. In 3.7, you can see a thin light-colored margin all around the base of the pyramid, especially thick under the top cylinder. In 3.6, this artifact is absent. For comparison purposes, I have inserted a “#version 3.6;” directive at the top of the file so that the output images are as close to each other as possible. However, the artifact is still present in 3.7 without this directive.

The attached scene file is only a small part of a much larger scene, where this artifact shows up in numerous very obvious places, where it doesn’t in 3.6. I have hunted in the documentation and online for ways to solve this problem, but haven’t found anything. Because of this, I am forced to stay with 3.6 for production use, which is quite unfortunate since I’d like to take advantage of the new features of 3.7.

326OtherDefinite Bug3.70 releaseVery LowLowrestricted setting ignored in 3.7Tracked on GitHub
0%
Task Description

Due to a typo in the conf file parser (introduced, I think, in refactoring after 3.6), the restricted setting is ignored, and access checks aren’t performed.

Fixing this reveals some other issues:

  • %INSTALLDIR%/../../etc is incompletely canonicalized to /usr/local/share/../etc, not /usr/local/etc
  • read+write paths are added to the read list only, so writing is impossible

See attached patch.

Relatedly, I think it would be nice to add a new replacement token %CONFDIR% instead of %INSTALLDIR%/../../etc.

Also, there’s a realpath function that could simplify path handling, though I’m not sure if it’s available on all platforms.

327Parser/SDLFeature Request3.70 releaseVery LowLowSupport for non-ASCII characters in filename stringsTracked on GitHub
0%
Task Description

pov 3.7 Can not identify the Chinese.I give the texture map filename in chinese,it turns out parse error.

328User interfaceDefinite Bug3.70 releaseVery LowMediumAscii char '=' in filenames causes command line parsing...Tracked on GitHub
0%
Task Description

The following command fails with parsing error:
povray +OqXfFbD0Vg5XjZgi5sOefkvdF_oCGrZ1ChVhrQw==.png +IqXfFbD0Vg5XjZgi5sOefkvdF_oCGrZ1ChVhrQw==.pov +W1000 +H1000

The following command succeeds:
povray +OqXfFbD0Vg5XjZgi5sOefkvdF_oCGrZ1ChVhrQw.png +IqXfFbD0Vg5XjZgi5sOefkvdF_oCGrZ1ChVhrQw.pov +W1000 +H1000

Any option that gets a filename as parameter will fail if it contains ‘=’.

It is a regression, as it worked fine with 3.6.

333User interfaceFeature Request3.70 releaseVery LowLowMake text in "about" alt+b dialog selectable with the m...Tracked on GitHub
0%
Task Description

When you press alt+b or access the “about” dialog in the Help menu it displays some text including software version number and list of contributors.

It would be nice to be able to select and copy this text using this mouse. Sometimes in the newsgroup I have to tell people what version of POVray I am using, and typing the version number can be a pain.

334Texture/Material/FinishFeature Request3.70 releaseVery LowLowHLS colorsTracked on GitHub
0%
Task Description

It would be nice to be able to specify colors in HLS as well as RGB.

Currently, you can use a macor to convert individual colors. But this does not work in color_maps where you want smooth gradations/interpolations between two or several colors.

335Parser/SDLPossible Bug3.70 releaseVery LowLowmacro works in variable but not in arrayTracked on GitHub
0%
Task Description

This doesn’t work:

#declare pavement_object = array[2]
{

object {trash_can_macro()	scale 3/4			translate -x * 1/2},
object {potted_plant_macro(_CT_rand2)	scale 3/4	scale 3/2	translate -x * 1/2}

}

This does work:

#declare trash_can_object = object {trash_can_macro()};
#declare potted_plant_object = object {potted_plant_macro(_CT_rand2)};
#declare pavement_object = array[2]
{

object {trash_can_object	scale 3/4			translate -x * 1/2},
object {potted_plant_object	scale 3/4	scale 3/2	translate -x * 1/2}

}

Logically, I cannot see a reason for this to be so.

26Geometric PrimitivesDefinite Bug3.61Very LowLowArtifacts rendering a cloth which has two-side texturesTracked on GitHub
0%
Future release Task Description

Dear PovRay maintainers and developers, congratulations for your great RayTracer!

We think that we have found a bug while we were rendering a piece of cloth.

In this piece of cloth were defined two textures, one for one side and one for the another side:

  texture { mesh_tex0_0 }
  interior_texture { mesh_tex0_1 }
  • Please: Look at line 77414 of the attached file “test.pov” to see

these definitions in their original context.

We have found some artifacts in the final rendering, in concrete near some wrinkles,
please, look at the attached file “render_artifacts.tga”, I have painted a big green arrow
near the artifacts, maybe you’ll need to do a zoom to see them more accurately.

They are as though the texture of the other side was painted in the incorrect side.

Fortunately, we have a patch to fix this bug (thanks to Denis Steinemann, he made the
implementation for PovRay 3.5, so I have adapted these changes to release 3.6.1)

Although we have found this bug in the Windows and Linux 3.6.1 releases,
the patch was generated in Linux (using the source code release of “povray-3.6.1”).

To apply this patch, inside the parent folder of the directory “povray-3.6.1” execute:

            patch -p0 < other_side_artifacts.patch

And the “povray-3.6.1” will be patched and you will get a console output like this:

 patching file povray-3.6.1/source/lighting.cpp
 patching file povray-3.6.1/source/mesh.cpp
 patching file povray-3.6.1/source/render.cpp

We don’t know if this “hack” is enough smart to apply in the next release,
but we think that it fixes the bug (the artifacts dissapear).

Best regards and thank you very much for your great RayTracer!

145Parser/SDLFeature Request3.70 beta 37aVery LowLowStack trace report on errorTracked on GitHub
10%
Task Description

In other languages if you encounter an error you’ll often be presented with a stack trace showing not only the file and line number the error occurred at, but also any calling functions and _their_ calling functions and so on.

Currently, Povray reports the line number of the error as well as the last five or so lines prior to the error. This is usually OK in simple scenes, but breaks down when you start making use of inclusion and macros.

Let’s say you have a macro located in a file that you then include in your scene. Within your scene you call the macro multiple times, passing input to it. However, by accident you pass _invalid_ input to the macro at some point, resulting in an error when parsing. In this case Povray will report the error as belonging to the macro whereas the actual bug exists in the calling code. If the macro is called more than once in your scene it can be difficult to figure out _which_ instance is the one supplying the bad input.

Not sure how much of this is achievable in Povray.

313RadiosityDefinite Bug3.70 releaseLowHighradiosity.cpp pov::RadiosityFunction::BeforeTile assert...Tracked on GitHub
20%
Task Description

With 3.7.0 final, rendering attached files (for Computer Engineering college course),
which renders without issues in povray 3.6.1, fails with following error:

...
==== [Rendering...] ========================================================
povray: backend/lighting/radiosity.cpp:324: virtual void pov::RadiosityFunction::BeforeTile(int, unsigned int): Assertion `(pts >= PRETRACE_FIRST) && (pts <= PRETRACE_MAX)' failed.

Command line:

povray +K0.6500 \
+FN +Q9 +MB1 \
+W600 +H400 \
+AM1 +A0.0 +R2 \
+D +SP32 +EP4 \
+L/usr/share/povray-3.7/include \
+Imain.pov \
+Omain-0.6500.png

Using Arch Linux testing current:
Linux archmidi 3.12.0-1-ARCH #1 SMP PREEMPT Wed Nov 6 09:06:27 CET 2013 x86_64 GNU/Linux

Downstream bug report:
https://bugs.archlinux.org/task/37689

75Geometric PrimitivesUnimp. Feature/TODO3.70 beta 34Very LowMediumReplace POV_MALLOC with std::vector in shape codeTracked on GitHub
30%
Future release Task Description

In the files bezier.cpp, fpmetric.cpp, fractal.cpp, hfield.cpp, isosurf.cpp, lathe.cpp, poly.cpp, polygon.cpp, prism.cpp, sor.cpp, and sphsweep.cpp the use of POV_MALLOC can be replaced by std::vector quite easily because the containing class already is a C++ class. As this is a low hanging fruit for continued code cleanup, it should be done sooner rather than later.

275Light sourceDefinite Bug3.70 RC7Very LowLowcircular area lights exhibit anisotropyTracked on GitHub
50%
Future release Task Description

circular area lights exhibit some anisotropy, being brighter along the diagonals than on average, as can be demonstrated with the following scene:

//+w800 +h800
#version 3.7;
global_settings{assumed_gamma 1}
plane{-z,-10 pigment{rgb 1} finish{ambient 0 brilliance 0}}
disc{0,z,10000,0.5}
camera{orthographic location z look_at 10*z up y*12 right x*12}
light_source{-10*z rgb 10 area_light 10*x 10*y 257 257 adaptive 4 circular}
287Light sourceDefinite Bug3.70 RC7Very LowLowarea_illumination shadow calculationTracked on GitHub
50%
Future release Task Description

not sure if this is something needing further work or an intended effect.

Shadows from and area light with area_illumination on seem to follow the same shadow calculation as a standard area light by giving more weight to lights near the center of the array. I would assume the shadows would be calculated similarly to individual lights in the same pattern as the array by evenly distributing the amount of shadow equally for each light. But this is not what I see.

The code sample below when rendered with scene 1 will show shadows grouped near the center from the area light with area_illumination. If scene 1 is commented out and scene 2 is uncommented then rendered, you will see evenly distributed shadows from individual lights. Area lighting with area_illumination I would assume should give a result identical to scene 2. If scene 1 is rendered with area_illumination off, the shadow calculation is exactly the same as with area_illumination on.

example images rendered on win32 XP

#version 3.7;

global_settings {
 ambient_light 0
 assumed_gamma 1
}

camera {
  location <0, 3, -5>
  look_at <0, 2, 0>
}

background { rgb <.3, .5, .8> }
plane { y,0 pigment { rgb .7 } }
torus { 1.5,.1 rotate 90*x translate 4*z pigment { rgb .2 } }
plane { -z,-7 pigment { rgb .7 } }

/*
// scene 1
light_source{
  y
  1
  area_light 3*x, z, 7, 1
  area_illumination on
}
union {
 sphere { 0,.05 }
 sphere { .5*x,.05 }
 sphere { x,.05 }
 sphere { 1.5*x,.05 }
 sphere { -.5*x,.05 }
 sphere { -x,.05 }
 sphere { -1.5*x,.05 }
 translate y
  hollow pigment { rgbt 1 } interior { media { emission 10 } }
}
// end scene 1
*/


// scene 2
#declare Light = light_source {
  0
  1/7
  looks_like { sphere { 0,.05 hollow pigment { rgbt 1 } interior { media { emission 10 } } } }
}

union {
 object { Light }
 object { Light translate .5*x }
 object { Light translate x }
 object { Light translate 1.5*x }
 object { Light translate -.5*x }
 object { Light translate -x }
 object { Light translate -1.5*x }
 translate y
}
// end scene 2

301OtherDefinite Bug3.70 RC7Very LowLowFallback to default image size causes wrong values to b...Tracked on GitHub
50%
Task Description

When resolution is not specified (neither via POVRAY.INI nor via QUICKRES.INI nor via command line or custom .ini file), random values are displayed for image resolution in the Image Output Options message output. (The actual render will be performed at the default size of 160×120 pixels though.)

206OtherPossible Bug3.70 RC3Very LowLow"Cannot open file" error when text output files specifi...Tracked on GitHub
50%
3.71 release Task Description

I created an INI file which specifies the Input_File_Name, Output_File_Name, and also the Render_File and the remaining four text outputs as double-quoted absolute paths on my disk. When I run the render, I get the following output:

Preset INI file is ‘C:\USERS\TPREAL\DOCUMENTS\POV-RAY\V3.7\INI\QUICKRES.INI’, section is ‘[512×384, No AA]’.
Preset source file is ‘D:\Ruby\POV-Rb\ini\20110521_004037_Noix.ini’.
Rendering with 2 threads.
-
Cannot open file.
Render failed
-
CPU time used: kernel 0.06 seconds, user 0.02 seconds, total 0.08 seconds.
Elapsed time 0.52 seconds.

And the render does not start. The five text output files are not even created, and where the output image should be, there is a file with extension pov-state. The render works as it should only when I remove all five lines defining the five text output files. The paths I specify for the files are correct (paths exist and files do not, no white-spaces or anything), read/write restrictions are disabled in POV-Ray. This used to work in 3.6 and does not work now in 3.7 RC3. The error happens no matter if I run the render using GUI or command line.

(Also please note that the error message is really not useful here, it does not say which file it failed to open, and not even if it was an attempt to open for read or for write.)

I’d be really glad if you could correct this as it’s a critical functionality for me. I’m generating the POV-Ray code automatically and I need to parse the text output automatically to return the status to the generator.

183Texture/Material/FinishPossible Bug3.70 beta 40Very LowLowcutaway_textures broken with child unionsTracked on GitHub
50%
Future release Task Description

When using cutaway_textures in a CSG object that has union children, results are not as expected; instead, surfaces in the union children that have no explicit texture will be rendered with the default texture instead. This is not the case for e.g. difference children.

Example:

#default { texture { pigment { rgb 1 } } }

camera {
  right x*image_width/image_height
  location  <0,1.5,-4>
  look_at   <0,1,0>
}

light_source { <500,500,-500> color rgb 1 }

#declare U = union {
  sphere { <0,-0.1,-1>, 0.3 }
  sphere { <0, 0.1,-1>, 0.3 pigment { color red 1 } }
}

intersection {
  sphere { <0,0,0>, 1 pigment { color green 1 } }
  object { U }
  cutaway_textures
  rotate y*90
}

When declaring U as an intersection instead, the results are as expected, with the surface of the first sphere in U being rendered with the texture defined in the outer intersection.

98Refactoring/CleanupUnimp. Feature/TODO3.70 beta 36DeferMediumRefactor Windows UI code for Unicode supportTracked on GitHub
50%
Future release Task Description

Windows UI code should be refactored to use _TCHAR throughout instead of char, as well as the corresponding string function macros, to head for Unicode support.

196Subsurface ScatteringDefinite Bug3.70 RC3Very LowLowMore SSLT CaveatsTracked on GitHub
90%
Future release Task Description

when a prism is differenced with a primitive (cylinder in this case) if sslt is used it causes a seq fault. Reference distribution file logo.inc and the Povray_Logo_Prism definition.

Showing tasks 51 - 100 of 103 Page 2 of 3 - 1 - 2 - 3 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing