POV-Ray

The Persistence of Vision Raytracer (POV-Ray).

This is the legacy Bug Tracking System for the POV-Ray project. Bugs listed here are being migrated to our github issue tracker. Please refer to that for new reports or updates to existing ones on this system.

IDCategoryTask TypeReported InPriority  descSeveritySummaryStatusProgressDue In Version
7RadiosityUnimp. Feature/TODO3.70 beta 32LowMediumRe-implement Radiosity render abort/continue supportTracked on GitHub
0%
Task Description

For proper render abort/continue support, radiosity cache data must be written to (or read from) disk even if the user does not explicitly opt to have a sample data file written/read. This feature has temporarily been dropped from 3.7 beta and is still pending re-implementation.

To meet high-reproducibility requirements in conjunction with SMP operation, it may be necessary to extend the 3.6 radiosity cache file format.

70PhotonsUnimp. Feature/TODO3.70 beta 34LowHighload/save photons should be controlled via command lineTracked on GitHub
0%
Task Description

Just like radiosity load/save, the photon mapping load/save mechanism should be moved to the frontend and controlled via command-line switch, instead of being SDL-driven in the backend.

313RadiosityDefinite Bug3.70 releaseLowHighradiosity.cpp pov::RadiosityFunction::BeforeTile assert...Tracked on GitHub
20%
Task Description

With 3.7.0 final, rendering attached files (for Computer Engineering college course),
which renders without issues in povray 3.6.1, fails with following error:

...
==== [Rendering...] ========================================================
povray: backend/lighting/radiosity.cpp:324: virtual void pov::RadiosityFunction::BeforeTile(int, unsigned int): Assertion `(pts >= PRETRACE_FIRST) && (pts <= PRETRACE_MAX)' failed.

Command line:

povray +K0.6500 \
+FN +Q9 +MB1 \
+W600 +H400 \
+AM1 +A0.0 +R2 \
+D +SP32 +EP4 \
+L/usr/share/povray-3.7/include \
+Imain.pov \
+Omain-0.6500.png

Using Arch Linux testing current:
Linux archmidi 3.12.0-1-ARCH #1 SMP PREEMPT Wed Nov 6 09:06:27 CET 2013 x86_64 GNU/Linux

Downstream bug report:
https://bugs.archlinux.org/task/37689

4Subsurface ScatteringUnimp. Feature/TODO3.70 beta 32Very LowLowIntegrate Subsurface Scattering with standard lighting ...Tracked on GitHub
90%
Future release Task Description

Subsurface Scattering still uses its own rudimentary code to compute illumination from classic light sources; this must be changed to use the standard light source & shadow handling code, to add support for non-trivial light sources (e.g. spotlights, cylindrical lights, area lights), partially-transparent shadowing objects etc.

20User interfaceFeature Request3.70 beta 32Very LowVery Lowrender window behaviorTracked on GitHub
0%
Task Description

When changing the behavior of the render window, “Keep above main”, requires restarting the POV editor to take effect. It would be nice either to get a warning to restart, or to get it to work without restarting.

26Geometric PrimitivesDefinite Bug3.61Very LowLowArtifacts rendering a cloth which has two-side texturesTracked on GitHub
0%
Future release Task Description

Dear PovRay maintainers and developers, congratulations for your great RayTracer!

We think that we have found a bug while we were rendering a piece of cloth.

In this piece of cloth were defined two textures, one for one side and one for the another side:

  texture { mesh_tex0_0 }
  interior_texture { mesh_tex0_1 }
  • Please: Look at line 77414 of the attached file “test.pov” to see

these definitions in their original context.

We have found some artifacts in the final rendering, in concrete near some wrinkles,
please, look at the attached file “render_artifacts.tga”, I have painted a big green arrow
near the artifacts, maybe you’ll need to do a zoom to see them more accurately.

They are as though the texture of the other side was painted in the incorrect side.

Fortunately, we have a patch to fix this bug (thanks to Denis Steinemann, he made the
implementation for PovRay 3.5, so I have adapted these changes to release 3.6.1)

Although we have found this bug in the Windows and Linux 3.6.1 releases,
the patch was generated in Linux (using the source code release of “povray-3.6.1”).

To apply this patch, inside the parent folder of the directory “povray-3.6.1” execute:

            patch -p0 < other_side_artifacts.patch

And the “povray-3.6.1” will be patched and you will get a console output like this:

 patching file povray-3.6.1/source/lighting.cpp
 patching file povray-3.6.1/source/mesh.cpp
 patching file povray-3.6.1/source/render.cpp

We don’t know if this “hack” is enough smart to apply in the next release,
but we think that it fixes the bug (the artifacts dissapear).

Best regards and thank you very much for your great RayTracer!

27OtherFeature Request3.70 beta 32Very LowLowAdd texture support to background statementTracked on GitHub
0%
Future release Task Description

Adding full texture statement support to the background statement (with a scale of 1/1) aligned with the image_map direction of an image would allow i.e. specifying an image as background easily.

28FrontendFeature Request3.70 beta 32Very LowLow#debug message not displayed.Tracked on GitHub
0%
Future release Task Description

The #debug message stream is only being flushed when it hits a newline character,
instead of after each #debug statement. This means that some final strings don’t show up.

#debug "This line prints,\n but this line doesn't."
41OtherFeature Request3.70 beta 32Very LowLowimprove command-line parsing error messagesTracked on GitHub
0%
Task Description

POV-Ray 3.6, upon encountering problems when parsing command line and/or .ini file options, would quote the offending option in the error message.

POV-Ray 3.7 currently just reports that there is some problem with the command line, without providing any details. I suggest changing this, as the information may be helpful at times.

42OtherDefinite Bug3.70 beta 32Very LowMediumcommand line parameters are not parsed properly on UnixTracked on GitHub
0%
Task Description

POV-Ray does not follow common practice on command-line handling; for instance:

povray +i"My File"

entered on a Unix shell would be passed to POV-Ray as

povray
+iMy File

(each line representing a distinct parameter here), which POV-Ray would further dissect, interpreting it as

povray
+iMy
File

To achieve the desired effect, one would actually have to quote the string twice:

povray +i"'My File'"

which the shell would translate to

povray
+i'My File'

which POV-Ray would interpret as

povray
+iMy File

In both cases, this is obviously not what a Unix user would expect.

The further dissecting of individual command-line parameters may have had its valid roots in the peculiarities of DOS’ command-line handling, but to my knowledge all major contemporary operating systems follow a concept akin to Unix, passing a list of parameters instead of a monolithic command line, and burdening the respective command shells with the task of dissecting command lines into parameters.

Therefore I suggest to disable this anachronistic feature in favor of contemporary standards; a compiler flag might be used to allow for easy re-enabling of the feature, for compiling POV-Ray on exotic targets.

- edit -

It has been pointed out that the described behaviour differs from 3.6, so I’m promoting this to a bug and changing the title.

44RadiosityFeature RequestAllVery LowLowImprove Normals Handling in RadiosityTracked on GitHub
0%
Future release Task Description

Currently, radiosity does not make use of the fact that pertubed normals would theoretically just require a different weighting of already-sampled rays, leading to the following issues:

  • Honoring normal pertubations in radiosity leads to an increased number of samples, slowing down sample cache lookup.
  • The increased number of samples is generated from a proportionally higher number of sample rays, slowing down pretrace even further.
  • Low-amplitude pertubations tend to be smoothed out; “reviving” these is only possible by increasing the general sample density.
  • Handling of multi-layered textures with different normal pertubations is currently poorly implemented.

As a solution, I propose to store for each radiosity sample not only the resulting illumination for a perfectly unpertubed normal, but from the same set of sample rays also compute the illumination for an additional set of about a dozen standardized pertubed-normal directions, and interpolate among these when computing the radiosity-based illumination for a particular point that has a pertubed normal.

For backwards compatibility, this method of dealing with pertubed normals in radiosity might be activated by a different value for the “normal” statement in the radiosity block, say, “normal 2”.

47PreviewPossible Bug3.70 beta 32Very LowLowRender Preveiw window can become disabledTracked on GitHub
0%
Task Description

If a render is continued with the +c option and the render had completed, the render preview window will disappear and the show/hide render window button will be grayed. Even after the scene is modified and the command line options have been changed, the show/hide button will still be grayed.

Opening or changing to another scene and rendering will not restore the button, nor will rendering with +d. However, if a trace is started using -d, halted, then continued using +d (or allowed to finish completely with -d and a new one is started using +d), then the preview window is restored.

This behavior is different from 3.6.1, which correctly always showed the preview window (since +d is default) unless -d was specified.

50Runtime errorPossible Bug3.70 beta 32Very LowMediumFrequent segfaults with photon scenesTracked on GitHub
0%
Task Description

I observe frequent segfaults with POV-Ray 3.7 betas when rendering scenes using photons:

  • Debian Linux 4.0r5 “etch” for AMD64
  • AMD Phenom X4 9650 2.3GHz, 6 GB RAM
  • POV-Ray compiled with Intel icpc 11.0

Segfaults are sporadic but frequent (occurring in roughly 50% of all photon renders).

60Geometric PrimitivesDefinite Bug3.70 beta 34Very LowMediumArtifacts using prism in CSGTracked on GitHub
0%
Future release Task Description

Using prisms in intersecion or difference CSG objects may cause artifacts in POV-Ray 3.6.2 as well as 3.7.0.beta.34, as demonstrated by the following code:


camera {
  right    -x
  up        y*image_height/image_width
  location  <-24,19,12>
  look_at   <0,0,0>
}

light_source { <100,200,100> color rgb 1 }

plane { y, -2 pigment { color rgb 1 } }


#declare KeyValue = 1.366; // pick any you like

difference {
  prism {
    linear_sweep -0.5,0.5, 4
    
    <-3,20-17>,
    <-3,KeyValue>,
    <-6,-3>,
    <-0,-5>
  }
  intersection {
    cylinder { <-7,-0.51,1>, <-7, 0.51,1>, 4.0 }
    plane { z, KeyValue }
  }
  pigment { color rgb 0.5 } 
}

Apparently the surface of the other object becomes visible when it exactly coincides with a vertex of the prism; probably there is a failure of the inside() test for such values.

65Parser/SDLFeature Request3.70 beta 34Very LowLowAdd support for vectors with functionsTracked on GitHub
0%
Future release Task Description

Being able to have functions operate on vectors would be pretty nice to have.

71User interfaceUnimp. Feature/TODO3.70 beta 34Very LowLowraise warning when command line option has no effectTracked on GitHub
0%
Task Description

Warnings should be raised when a command line option has no effect,
for example...

pvengine +am

is legal, but without the number after it, it has no effect.

pvengine +am7

should be an error, and also raises no warnings.

75Geometric PrimitivesUnimp. Feature/TODO3.70 beta 34Very LowMediumReplace POV_MALLOC with std::vector in shape codeTracked on GitHub
30%
Future release Task Description

In the files bezier.cpp, fpmetric.cpp, fractal.cpp, hfield.cpp, isosurf.cpp, lathe.cpp, poly.cpp, polygon.cpp, prism.cpp, sor.cpp, and sphsweep.cpp the use of POV_MALLOC can be replaced by std::vector quite easily because the containing class already is a C++ class. As this is a low hanging fruit for continued code cleanup, it should be done sooner rather than later.

79Source codeFeature Request3.70 beta 35aVery LowLowFull-Featured Test-Scene to check the correctness of po...Tracked on GitHub
0%
Future release Task Description

Hi,

it would be nice if there exists a test scene (not a benchmark) which has a high coverage of povray source and can be used as correctness validation of povray. It schould be produce an image which can be compared to a golden reference image.

It may be also possible to create a regression test suite which does automatic comparision of the render results.

81Geometric PrimitivesDefinite Bug3.62Very LowMediumsphere_sweep generating artifactsTracked on GitHub
0%
Task Description

I’m running POV-Ray for (64 bit) Windows v3.62 on (64 bit) Windows Vista

This pov file:


#include "colors.inc"
#include "metals.inc"

light_source { <6, 9, -21> color White }
camera { location <0, 0, -3> look_at <0, 0, 0> }

sphere_sweep {
                cubic_spline
                6
                <-2.0, 0, 0> 0.05

                <0.000,0,0> 0.2
                <0.025,0,0> 0.2
                <0.050,0,0> 0.2
                <0.075,0,0> 0.2

                <3.0,0,0> 0.2
                pigment { color White }
}

Produces two strange artifacts: A disk at the center of the sweep, and a faint “halo” or veil which shows as 4 faint hyperbolas centered around the origin.

I have tried tweaking tolerance (for no other reason than I saw that someone else was tweaking it to solve a problem) but this does not seem to change things.

For a look at MY result when I run this, view this image:

riventree.comarchivebugdatapovrayspheresweepartifacts.jpg

Alain reports the same behavior in the latest version: “It’s still there with the latest version: 3.7 beta 35a.” This MAY move the status to “confirmed”, but I can’t do that

Someone else says that changing the scale (!) “solves” the problem by moving the disk and the halo offscreen, but that sounds like a bad idea to me.

-Jeff Evarts, first-time POVRay bug reporter

96Texture/Material/FinishFeature RequestNot applicableVery LowLowUser-defined warpsTracked on GitHub
0%
Future release Task Description

User-defined warps would be nice to have, something along the lines of:

warp {
  function { MyFnX(x,y,z) } // function to compute pattern-space x-coordinate from object-space <x,y,z> coordinate
  function { MyFnY(x,y,z) } // ditto for pattern-space y coordinate
  function { MyFnZ(x,y,z) } // ditto for pattern-space z coordinate
}

// a displacement warp:
warp {
  function { x + MyFnX(x,y,z) }
  function { y + MyFnY(x,y,z) }
  function { z + MyFnZ(x,y,z) }
}
106DistributionUnimp. Feature/TODO3.70 beta 37Very LowLowUpdate sample scenes and include files for POV-Ray 3.7 ...Tracked on GitHub
0%
Task Description

Most sample scenes and include files were designed at times when POV-Ray did not to any proper gamma handling, or still used the inferior 3.6 “assumed_gamma” mechanism.

All the scenes and include files should be reviewed, and updated to fit the new 3.7 gamma model.

The primary task will probably be gamma-adjusting literal color values and ambient parameters; I suggest using macros (which ideally should be defined in an include file) to be set according to the #version statement, so the scene/include file could be kept compatible with older versions.

108Parser/SDLFeature Request3.70 beta 37Very LowLowmotion_blur feature similar to Megapov versionTracked on GitHub
0%
Future release Task Description

motion_blur which is a simple and effective feature to use in Megapov to simulate motion blur of, e.g. bird wings, propellers or running animals, would be a neat addition to version 3.7 and later.

In Megapov, the feature requires a line of code in the global_settings{} e.g.: motion_blur 10, 2
and a declaration for the moving object. e.g.:

motion_blur {
  type 0
  object{MyObject  material{MyMaterial rotate x*clock*2}}
  rotate x*clock*10
}

type represents several types of pre-defined motions.

Thanks,

Thomas

115Texture/Material/FinishFeature Request3.70 beta 37aVery LowLowMore cutaway_texturesTracked on GitHub
0%
Future release Task Description

Think this is still a problem. See the attached scene file. Find the WindowFrameSegment declaration for more info. The scene as-is shows the problem (SOME portions of the difference inherit the color of the room) the window opening is scaled larger to show that they AREN’T touching. The problem goes away when (in WindowFrameSegment) the 1st occurrence of the applied texture is commented out and the 2nd occurrence is uncommented, and cutaway_textures is commented out.

118Light sourceFeature Request3.70 beta 37aVery LowLowMore efficient handling of fading lightsTracked on GitHub
0%
3.71 release Task Description

Currently, fading light sources are used for lighting and shadow
calculations even when so far away as to no longer have any effect
on the outcome. The proposed solution is to add a new keyword
fade_cutoff_distance which tells povray to ignore the light
source when alluminating a point at larger distance.

A sample implementation is provided in the attached files. These
changes are still based on beta 34 as sources for the current beta
are not yet available, and starting to merge changes to beta 35
only at this time didn’t seem worth the effort. Also, please
disregard, changes in the CVS header comments (I also use
CVS locally for managing source files).

Further considerations regarding this feature:

- For special effects this feature can also be used if the light
source does not actually use fading. On the other hand, cutting
the light at some distances can be considered an extreme form
of fading which may justify the keyword name anyhow.

- Depending on how  FS#46  is implemented, the test for cutoff may
then be needed at another location as well.

- The default value currently is 0 (or *no* cutoff distance). For
#version 3.7 of higher, the default could be chosen automatically
based on the light source intensity and adc_bailout, although it
may then need to be overriden by the user for extreme pigments.

127Parser/SDLFeature Request3.70 beta 37aVery LowLowExpandable arraysTracked on GitHub
0%
Future release Task Description

Currently, arrays are of a fixed size. You can’t add or remove items to/from an array. I think it would like arrays to be expandable with no fixed and pre-determined size.

131OtherFeature Request3.70 beta 37aVery LowLowAbility to change the order of editor tabs by dragging ...Tracked on GitHub
0%
Future release Task Description

See Notepad++ or EditPad Lite for examples.

It would be nice to be able to drag tabs in the editor window to change their order, so as to group opened files together by relevance for instance.

138User interfaceFeature Request3.70 beta 37aVery LowLow"Rename" option in File menuTracked on GitHub
0%
Task Description

Would be great if there were a “Rename” option in the editor File menu to rename the current file name. Otherwise, you have to close the file, rename it in file manager, then open the file again, thus loosing the current tab position and undo history for the file.

140Platform-specificFeature Request3.70 beta 37aVery LowLow"Reload" option in File menuTracked on GitHub
0%
Task Description

Would be great to have a “Reload” option in the File menu to manually reload the current file from disk, discarding all subsequent changes since the last save.

142Texture/Material/FinishFeature Request3.70 beta 37aVery LowLowcamera_view pigment from MegaPOVTracked on GitHub
0%
Future release Task Description

I probably don’t have to explain why the camera_view pigment in MegaPOV was important, but I will list some reasons anyway:

1) post-processing could be performed in-scene
2) new types of focal blur effects could be created
3) feedback fractals were possible

I’m sure there are many others, as this is one of those features that has undetermined potential!

145Parser/SDLFeature Request3.70 beta 37aVery LowLowStack trace report on errorTracked on GitHub
10%
Task Description

In other languages if you encounter an error you’ll often be presented with a stack trace showing not only the file and line number the error occurred at, but also any calling functions and _their_ calling functions and so on.

Currently, Povray reports the line number of the error as well as the last five or so lines prior to the error. This is usually OK in simple scenes, but breaks down when you start making use of inclusion and macros.

Let’s say you have a macro located in a file that you then include in your scene. Within your scene you call the macro multiple times, passing input to it. However, by accident you pass _invalid_ input to the macro at some point, resulting in an error when parsing. In this case Povray will report the error as belonging to the macro whereas the actual bug exists in the calling code. If the macro is called more than once in your scene it can be difficult to figure out _which_ instance is the one supplying the bad input.

Not sure how much of this is achievable in Povray.

151Runtime errorPossible Bug3.70 beta 37aVery LowLowNo way to cancel save while parsing, never ending error...Tracked on GitHub
0%
Task Description

On Windows, when I try and save a file while it is being parsed prior to rendering, I get an error, “Failed to save file: The operation completed successfully”, with a single OK button to click. Despite the weird wording, I’m OK with that.

However after clicking OK I get the error, “Failed to save file ‘...’“, with three buttons: Cancel, Try Again, Continue. Not sure what “Continue” means in this context, given that the possibilities would seem to be covered by the other two buttons. Whatever.

Also, sometimes I get a message with only a single “Retry” button. Not sure what the exact message was.

Anyway, the real problem is that, regardless of which button I press, the program continues to spawning the same error message endlessly. Luckily there is a delay between them, but still it would be nice to have at least one of the three buttons *stop* POV-Ray from asking me again.

Also, once the program finishes parsing the file and it becomes possible once again to save the file, it does nothing. I.e. it doesn’t save the file. So what’s the point of the message and all the options? Why not just say, “Unable to save the file, file is parsing” and be done with it?

I think I recall the same behavior in 3.6.2, so it’s nothing new that’s been introduced.

172Image formatUnimp. Feature/TODO3.70 beta 39Very LowLowRe-implement progressive image outputTracked on GitHub
0%
Future release Task Description

With previous versions of POV-Ray, it was possible to turn off display output, but still assess the output during render by viewing the output file as it was progressively generated. This allowed e.g. to run a long render on a remote machine as a background process, and check the output from time to time via FTP or similar.

177Light sourceFeature Request3.70 beta 39Very LowLowAdd support for conserve_energy to shadow computationsTracked on GitHub
0%
Task Description

The following scene gives a comparison of current conserve_energy handling in standard shadow computations vs. photons.

Note how the rather highly reflective slabs fail to cast shadows, except where the photons target sphere enforces computation of shadow brightness to be done by the photons algorithm.

For more realistic shadowing without the need to enable photons, I suggest do add proper conserve_energy handling to the shadow computation code (which shouldn’t be too much effort).

global_settings {
  max_trace_level 10
  photons { spacing 0.003 media 10 }
}

camera {
  right x*image_width/image_height
  location  <-2,2.6,-10>
  look_at   <0,0.75,0>
}

light_source {
  <500,300,150>
  color rgb 1.3
  photons {
    refraction on
    reflection on
  }
}

sky_sphere {
  pigment {
    gradient y
    color_map {
      [0.0 rgb <0.6,0.7,1.0>]
      [0.7 rgb <0.0,0.1,0.8>]
    }
  }
}

plane {
  y, 0
  texture { pigment { color rgb 0.7 } }
}

#declare M_Glass=
material {
  texture {
    pigment {rgbt 1}
    finish {
      ambient 0.0
      diffuse 0
      specular 0.2 // just to give a hint where the sphere is
    }
  }
  interior { ior 1.0 }
}

#declare M_PseudoGlass=
material {
  texture {
    pigment {rgbt 1}
    finish {
      ambient 0.0
      diffuse 0.5
      specular 0.6
      roughness 0.005
      reflection { 0.3, 1.0 fresnel on }
      conserve_energy
    }
  }
  interior { ior 1.5 }
}


sphere {
  <1.1,1,-1.3>, 1
  material { M_Glass }
  photons {
    target 1.0
    refraction on
    reflection on
  }
}

// behind target object
box {
  <-0.2,0,-2.3>, <0.0,4,0.3>
  material { M_PseudoGlass }
  rotate z*1 // just to better see the reflection of the horizon
}

// before target object
box {
  <2.4,0,-2.3>, <2.6,4,-0.3>
  material { M_PseudoGlass }
  photons { pass_through }
  rotate z*1 // just to better see the reflection of the horizon
}
178Texture/Material/FinishFeature Request3.70 beta 39Very LowLowModify metallic reflection code to better work with con...Tracked on GitHub
0%
Task Description

The combination of metallic reflection with conserve_energy causes the reflection to lose colour, as demonstrated by the following scene:

global_settings {
  max_trace_level 10
}

camera {
  right x*image_width/image_height
  location  <-2,2.6,-10>
  look_at   <0,0.75,0>
}

light_source {
  <500,300,150>
  color rgb 1.3
}

sky_sphere {
  pigment {
    gradient y
    color_map {
      [0.0 rgb <0.6,0.7,1.0>]
      [0.7 rgb <0.0,0.1,0.8>]
    }
  }
}

plane {
  y, 0
  texture { pigment { color rgb 0.7 } }
}

#declare M=
material {
  texture {
    pigment {rgbt <1.0,0.7,0.2,0.99>}
    finish {
      ambient 0.0
      diffuse 0.5
      specular 0.6
      roughness 0.005
      reflection { 0.8, 1.0 metallic }
      conserve_energy
    }
  }
  interior { ior 1.5 }
}

box {
  <-0.2,0,-2.3>, <0.0,4,0.3>
  material { M }
  rotate z*5
  rotate x*2
}
181BackendUnimp. Feature/TODO3.70 beta 40Very LowMediumUnimplemented, altered or missing features to document ...Tracked on GitHub
0%
Task Description

This is a list of unimplemented features and things to fix with respect to 3.7 vs 3.6 compatibility. They either need to be fixed in code, or failing that, to be documented prior to release.


Create_INI works differently from 3.6. Prior versions of POV-Ray would write all options to the file, even if they were not supplied by the user (non-supplied options would take the default value). Currently in 3.7, only supplied options are written, because the front-end does not send unused options to the back-end. The proper fix for this would be to have a set of defines that establish the defaults all in one place (currently we rely on hard-coded values scattered around the code), and for the Output_INI_Option() function to look up and use the default when not supplied. As this is not likely to be done before 3.7 release, we need to document it as a temporary situation.

The following messages are marked as ‘currently not supported by code’ in povmsgid.h. We need to check where this comment is correct and if so the docs need to be updated to indicate this (for items that are already documented). Some items may be re-implemented later, and some may never be:

  • kPOVAttrib_TestAbort
  • kPOVAttrib_TestAbortCount
  • kPOVAttrib_VideoMode
  • kPOVAttrib_Palette
  • kPOVAttrib_DisplayGammaType
  • kPOVAttrib_FieldRender
  • kPOVAttrib_OddField
  • kPOVAttrib_AntialiasGammaType
  • kPOVAttrib_LightBuffer
  • kPOVAttrib_VistaBuffer
  • kPOVAttrib_DrawVistas

This bug should be edited to add/remove items as time goes by.

183Texture/Material/FinishPossible Bug3.70 beta 40Very LowLowcutaway_textures broken with child unionsTracked on GitHub
50%
Future release Task Description

When using cutaway_textures in a CSG object that has union children, results are not as expected; instead, surfaces in the union children that have no explicit texture will be rendered with the default texture instead. This is not the case for e.g. difference children.

Example:

#default { texture { pigment { rgb 1 } } }

camera {
  right x*image_width/image_height
  location  <0,1.5,-4>
  look_at   <0,1,0>
}

light_source { <500,500,-500> color rgb 1 }

#declare U = union {
  sphere { <0,-0.1,-1>, 0.3 }
  sphere { <0, 0.1,-1>, 0.3 pigment { color red 1 } }
}

intersection {
  sphere { <0,0,0>, 1 pigment { color green 1 } }
  object { U }
  cutaway_textures
  rotate y*90
}

When declaring U as an intersection instead, the results are as expected, with the surface of the first sphere in U being rendered with the texture defined in the outer intersection.

196Subsurface ScatteringDefinite Bug3.70 RC3Very LowLowMore SSLT CaveatsTracked on GitHub
90%
Future release Task Description

when a prism is differenced with a primitive (cylinder in this case) if sslt is used it causes a seq fault. Reference distribution file logo.inc and the Povray_Logo_Prism definition.

202Geometric PrimitivesDefinite Bug3.70 RC3Very LowLowNumerical oddities in Julia_FractalTracked on GitHub
0%
Task Description

I understand that some things have changed in the way certain computations in POV-Ray decide when something is “good enough” and I think this is biting me in Julia_Fractal (where, of course, the highest-resolution computations are needed).

The bug has been posted here:

http://news.povray.org/povray.bugreports/thread/%3Cweb.4dbf2e26b56a53c15b4449250%40news.povray.org%3E/

Including a short .pov file and instructions that reproduce it.

(It pops up in other configurations and view angles as well, but this one captures in in a way that makes it clear it’s a bug: the distance of the camera from the origin appears to change the shape of the rendered object).

This appeared first on a Windows Server 2003 machine, it is apparently confirmable on at least one other system as per that thread.

205DocumentationUnimp. Feature/TODO3.70 RC3Very LowLowSyntax documentation uses inconsistent notationTracked on GitHub
0%
Task Description

The syntax notation used in the main documentation is different than that used in the quick-reference section. This should be changed for consistency, using the superior quick-reference notation throughout.

206OtherPossible Bug3.70 RC3Very LowLow"Cannot open file" error when text output files specifi...Tracked on GitHub
50%
3.71 release Task Description

I created an INI file which specifies the Input_File_Name, Output_File_Name, and also the Render_File and the remaining four text outputs as double-quoted absolute paths on my disk. When I run the render, I get the following output:

Preset INI file is ‘C:\USERS\TPREAL\DOCUMENTS\POV-RAY\V3.7\INI\QUICKRES.INI’, section is ‘[512×384, No AA]’.
Preset source file is ‘D:\Ruby\POV-Rb\ini\20110521_004037_Noix.ini’.
Rendering with 2 threads.
-
Cannot open file.
Render failed
-
CPU time used: kernel 0.06 seconds, user 0.02 seconds, total 0.08 seconds.
Elapsed time 0.52 seconds.

And the render does not start. The five text output files are not even created, and where the output image should be, there is a file with extension pov-state. The render works as it should only when I remove all five lines defining the five text output files. The paths I specify for the files are correct (paths exist and files do not, no white-spaces or anything), read/write restrictions are disabled in POV-Ray. This used to work in 3.6 and does not work now in 3.7 RC3. The error happens no matter if I run the render using GUI or command line.

(Also please note that the error message is really not useful here, it does not say which file it failed to open, and not even if it was an attempt to open for read or for write.)

I’d be really glad if you could correct this as it’s a critical functionality for me. I’m generating the POV-Ray code automatically and I need to parse the text output automatically to return the status to the generator.

222Geometric PrimitivesDefinite Bug3.70 RC3Very LowLowincorrect render of CSG merge with radiosityTracked on GitHub
0%
Future release Task Description

The problem arises when I am trying to trace a radiosity scene without conventional lighting that has a GSG merge object. There are a coincident surfaces, but these surfaces are first merged, then the texture applied. The texture is a simple solig color non-transfluent pigment, default normal, default finish etc..

Problem consists when adding antialiasing, changing resolution, changing camera view-point etc.; when I replace merge with union, the problem disappeared.

The scene was checked on two different machines with different versions of POV-Ray:

  1. Gentoo Linux, kernel 2.6.39-r3, i686 Intel(R) Xeon(TM) CPU 2.80GHz GenuineIntel, 2G RAM (this is Dell PowerEdge 2650 server with 2 dual-core Intel Xeon MP processors); Persistence of Vision™ Ray Tracer Version 3.7.0.RC3 (i686-pc-linux-gnu-g++ 4.5.3 @ i686-pc-linux-gnu)
  2. Gentoo Linux, kernel 2.6.37-r4, x86_64 AMD Athlon™ X2 Dual Core Processor BE-2350, 2G RAM (non-branded machine); Persistence of Vision™ Ray Tracer Version 3.6.1 (x86_64-pc-linux-gnu-g++ 4.4.4 @ x86_64-pc-linux-gnu)

(scene has been adapted slightly to be rendered with 3.6, the adaptation was to change “emission” with “ambient” and replace gamma “srgb” with “2.2”)

Both machines generate similar images.

The attachment is an archive containing sources of minimal scenes with these problems, and sample pictures I generated from them on my machines.

226Geometric PrimitivesPossible Bug3.70 RC3Very LowLowNear-coincident surface accuracyTracked on GitHub
0%
Task Description

This is a transparent box very close to a plane.

box {
    -1, 1
    pigment { rgbf <0, 0, 1, 1> }
}

plane {
    #if (version < 3.7)
        y, -1.0000007
    #else
        y, -1.00007
    #end
    pigment { rgb 1 }
    finish { ambient 1 }
}

camera {
    location <1, 2, 3>
    look_at 0
}

The box is placed 100 times closer to the plane for 3.6, but both 3.6 and 3.7 produce exactly the same black artifact (attached).

So apparently 3.7 is less accurate. (And the exact factor 100 feels suspicious.)

227Refactoring/CleanupUnimp. Feature/TODO3.70 RC3Very LowHighFixed Vector LimitationsTracked on GitHub
0%
Task Description

See this documentation entry for more details.

229Image formatFeature Request3.70 RC3Very LowLowClock value into EXIF data for PNGTracked on GitHub
0%
Task Description

The best time for a picture....

I set the day time and so the position of the sun by “clock=”

Normal I document my source very good, but this time,
I forgot the clock seting for the picture of my book cover.

So I would find it very practicall to put the clock value
and other setings for rendering
into EXIF data of the picture.

230User interfaceFeature Request3.70 RC3Very LowLowImproved handling of animationsTracked on GitHub
0%
Task Description

October to middle November, I prodduced a 5 minutes video mainly py POVRAY.

Here a part of the video.ini file

#

# szenes based on games.pov
#

#game-pat
#Initial_Frame=450 - time scale 1000 - 30 seconds
#Final_Frame=899
#Initial_Clock=-12500
#Final_Clock=17500

#game-lost - time scale 1000 - 22 seconds
#Initial_Frame=0
#Final_Frame=659
#Initial_Clock=2000
#Final_Clock=24000

#game-lost - time scale 3000 - 12 seconds - fast through the night
#Initial_Frame=0
#Final_Frame=359
#Initial_Clock=24000
#Final_Clock=60000

#book-cover
#clock=64000

#game-sunrise - time scale 1000 - 35 seconds
#Initial_Frame=0
#Final_Frame=1049
#Initial_Clock=60000
#Final_Clock=95000

Now imagine all the problems:

One computer crashes often because of thermal problems.
Last picture rendere 487.

Now calculate the setings, that this computer continues the task at 487

Or 2 computers should render a scene.

Sounds very easy. Something like computer 1 makes 0..499 computer 2 makes 500..999.

But the computers are different in speed and the pictures are
very different in computation time.

So it would be best

computer 1: 0 to 999
computer 2: 999 to 0

They would meet in the middle, where ever this middle is.

So it would be much easier with

#game-sunrise - time scale 1000 - 35 seconds
Initial_Frame=0
Final_Frame=1049
Initial_Clock=60000
Final_Clock=95000
Initial_Task=487
Final_Task=1049

So I have not to calculate the exact clock seting,
when a computer sould continue a task after crashing at picture 487

#game-sunrise - time scale 1000 - 35 seconds
Initial_Frame=0
Final_Frame=1049
Initial_Clock=60000
Final_Clock=95000
Initial_Task=1049
Final_Task=0

This would be the reverse calcualtion order.
Starting with picture 1049 and going down 1048..1047

240Geometric PrimitivesFeature Request3.70 RC3Very LowLowObject for efficient automatic periodic pavementTracked on GitHub
0%
Task Description

Whenever some object is to be periodically repeated in some kind of grid, you can achieve this with macros, but it
a) wastes a lot of resources

 even if object references are implemented in the future, wrapper with its own transformation matrix still takes space and bookkeeping

b) is not infinite

 annoying when making infinite planar tiling with arbitrary objects
 like an approximate water surface or tiling with real bricks
 or anything that needs to extend to horizon

c) is not optimized for periodicity

I think it can be very efficiently implemented as an object that takes a finite object argument (like CSG functions) and can be periodic in either 1D,2D or (possibly dangeorous?) 3D with specified period. In each dimension, the number of repetitions can be any integer or even infinity (or max_int). Something like
periodicity <2,2,Infinity> 2 copies in 1 direction, 2 in the other, infinite in the third
grid_separation <1,2,2>
1 unit size in first direction, 2 unit sizes in the other two

All the code needs to do is raytrace in the current unit cell and if the ray passes uninterrupted, pass it through the neighbouring unit cell (which means trace a translated ray through the same object). The object itself would just feel an additional clipping box, everything else would work seamlessly.

In case of infinite column of transparent object, max_trace stops the infinite loop anyway.

This is just a suggestion, I realize this is more of a long-term change but it is quite easy to implement and would simplify a large number of projects.

246OtherPossible Bug3.70 RC6Very LowLowRegression on scale limit between 3.7 and previous rele...Tracked on GitHub
0%
Task Description

From Thomas de Groot

Using the following code for a (sky) sphere in a scene, with light source well outside the sphere;
works correctly until the above scale value. Use a value of >=100*10e4 and the sphere becomes black.

#version 3.7;
global_settings{ assumed_gamma 1.0 }

#declare T_sky =
texture {
  pigment {
    gradient y
    pigment_map {
      [0.0 srgb <1.0,0.7,0.6>*1 transmit 0.5]
      [1.0 srgb <0.8,0.1,0.0>*1 transmit 0.5]
    }
  }
  finish {
    emission 0.9
    diffuse 0.0
  }
}

#declare T_cosmos =
texture {
  pigment {
    color rgbt <0,0,0,1>
  }
  finish {
    ambient 0.0
    diffuse 0.0
  }
}

sphere {
  <0,0,0>,1
  texture {T_sky}
  interior_texture {T_cosmos}
  no_shadow
  no_reflection
  inverse
  scale 99.9*10e4
}

Working with windows version of POV-Ray and Win7 x64

Is this normal for version 3.7 RC5? I seem to remember that with lower
versions of POV-Ray on could go at least to 10e6. Especially with the
Ringworld scenes back in 2010 the scales used where much larger without
any black out.

I can indeed confirm that the Ringworld scene does not render correctly anymore, with identical black out.

248Parser/SDLFeature RequestNot applicableVery LowLowImplement mechanism to compute direction of a splineTracked on GitHub
0%
Future release Task Description

The SDL currently provides no way to compute the exact direction of a spline at a given location, even though mathematically this is a piece of cake: The first-order derivative of any spline section gives you the “speed” as a vector function, and is trivial to compute for polynomial splines (which are behind all spline types that POV-Ray supports); the normalized “speed” vector, in turn, gives the “pure” direction.

For exact direction/speed computations, I propose to extend the SDL invocation syntax as follows to allow for evaluating a spline’s derivative:

    SPLINE_INVOCATION:
        SPLINE_IDENTIFIER ( FLOAT [, SPLINE_TYPE] [, FLOAT] )

or

    SPLINE_INVOCATION:
        SPLINE_IDENTIFIER ( FLOAT [, FLOAT] [, SPLINE_TYPE] )

where the second FLOAT will specify the order of derivative to evaluate (defaulting to 0). In order to compute the position, direction, and acceleration of an object traveling along a certain spline, one could then for instance use:

    #declare S        = spline { ... }
    #declare Pos      = S(Time);
    #declare VSpeed   = S(Time,1);
    #declare VAccel   = S(Time,2);
    #declare Dir      = vnormalize(VSpeed);
    #declare Speed    = vlength(VSpeed);
    #declare AccelDir = vnormalize(VAccel);
    #declare GForce   = vlength(VAccel) / 9.81;

Alternatively, a mechanism may be devised to create a spline representing another spline’s derivative; however, it would be debatable whether the syntax should be parameter-like (being an added information that could be overridden again when creating other splines from such a derived spline), or operation-like (converting the spline), and in the latter case how it should affect spline type (and consequently control points); so the spline invocation parameter approach might be more straightforward, with less potential surprises for the user.

251Parser/SDLPossible Bug3.70 RC6Very LowMediumScene / include files of >2GB size may cause problemsTracked on GitHub
0%
3.71 release Task Description

Code inspection shows that we’re still using fseek() and ftell() in various places (including text file input), which can’t handle file positions of 2GB and beyond (except on 64-bit linux machines); those calls need to be examined and (where appropriate) replaced with the fseek64() macro we’re already defining (but currently not using), and a to-be-defined ftell64() macro.

One potential (untested) error scenario would be a scene file calling a macro that is defined at the end of a > 2GB long include file.

252PhotonsDefinite Bug3.70 RC6Very LowLowphotons and light_group is brokenTracked on GitHub
0%
Task Description

photons are not working when used with a light_group. verified in NG posting in p.general a simple scene file is attached.

Showing tasks 1 - 50 of 103 Page 1 of 31 - 2 - 3 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing