POV-Ray

The following code is erroneously accepted by POV-Ray (tested with 3.7.0.beta.36):

pigment{
  slope { x }
  checker
}

The result is a checker pattern.

Apparently there is an EXIT statement missing in the slope-pattern parsing code in parstxtr.cpp.

The following scene shows how photons are “boosted” by pass_through objects; removing one of the boxes will reduce the effect; the effect can be seen with 3.6 as well as current betas:

global_settings {
  max_trace_level 10 // makes a difference!
  photons { spacing 0.02 }
}

camera {
  right x*image_width/image_height
  location  <0,2.6,-10>
  look_at   <0,0.75,0>
}

light_source {
  <500,500,150>
  color rgb 1.3
  photons {
    refraction on
    reflection on
  }
}

sky_sphere {
  pigment {
    gradient y
    color_map {
      [0.0 rgb <0.6,0.7,1.0>]
      [0.7 rgb <0.0,0.1,0.8>]
    }
  }
}

plane {
  y, 0
  texture { pigment { color rgb <1.0, 0.8, 0.6> } }
}

#declare M_Glass=
material {
  texture {
    pigment {rgbt 1}
    finish {
      ambient 0.0
      diffuse 0.05
      specular 0.6
      roughness 0.005
      reflection { 0.1, 1.0 fresnel on }
      conserve_energy
    }
  }
  interior {
    ior 1.5
    fade_power 1001
    fade_distance 0.9
    fade_color <0.5,0.8,0.6>
  }
}


sphere {
  <1.1,1,-1.3>, 1
  material { M_Glass }
  photons {
    target 1.0
    refraction on
    reflection on
  }
}

cylinder {
  <-1.2,0.01,0.8>, <-1.2,2.5,0.8>, 1
  material { M_Glass }
  photons {  // photon block for an object
    target 1.0
    refraction on
    reflection on
  }
}

box {
  <2.4,0,-2.3>, <2.6,4,-0.3>
  material { M_Glass }
  photons { pass_through }
}

box {
  <2.9,0,-2.3>, <3.1,4,-0.3>
  material { M_Glass }
  photons { pass_through }
}

The current Windows version of POV-Ray does not fully support forward slashes in pathnames; specifically, POV-Ray fails to recognize drive letters when followed by a forward slash, e.g. “C:/foo/bar.pov” or “C:/foo\bar.pov”, rejecting such names for e.g. Input_File_Name.

POV-Ray 3.7-generated JPEG image output files do not conform to the JFIF standard. Most importantly, the files written do not use the standard YCbCr color model (they seem to use plain RGB instead), nor do they have a proper JFIF tag.

As a consequence, some software may be unable to read the generated JPEG files properly. In addition, it seems that POV-Ray mixes up the Red and Blue channels.

Automatic removal of user-specified bounding boxes cannot be disabled in current POV-Ray 3.7 betas; the Remove_Bounds ini file setting and the +/-UR command line option are silently ignored.

OpenEXR output currently writes an alpha channel when Output_Alpha=off (-UA), and does not write an alpha channel when Output_Alpha=on (+UA), i.e. doing it just the wrong way round.

When using “filter all VALUE” with an image_map using a 4-bit (16-color) paletted bmp image, debug builds of POV-Ray fail with an assertion.

According to code analysis, other paletted image formats with <256 palette entries are also likely to be affected; similar assertion fails can be expected when using the “filter INDEX, VALUE” feature on such files with an index exceeding the palette size. “transmit” shows the same flaws.

If pretrace_start is set below pretrace_end, POV-Ray will run a high number of pretrace steps (without changing pretrace resolution).

‘povray -H10 -W20 myscene.pov’ will generate a file with a picture 10 pixels high and 20 pixels wide, BUT in the message pane it displays

Image resolution.....20 by 10 (rows 1 to 20, columns 1 to 10)

instead of

Image resolution.....20 by 10 (rows 1 to 10, columns 1 to 20)

or

Image resolution.....20 by 10 (columns 1 to 20, rows 1 to 10) 

polygon objects comprised of multiple “sub-polygons” don’t work properly if start/end points of sub-polygons do not exactly match, as can be demonstrated by the following code:

#default { texture { pigment { rgb 1 } finish { ambient 1.0} } }

camera {
  orthographic
  up 3.5*y
  right 3.5*x*image_width/image_height
  location  <0,0,-4>
  look_at   <0,0,0>
}

polygon { 8,
  // outer triangle
  0.70 * < cos(  0 *pi/180),sin(  0 *pi/180),0>
  0.70 * < cos(120 *pi/180),sin(120 *pi/180),0>
  0.70 * < cos(240 *pi/180),sin(240 *pi/180),0>
  0.70 * < cos(360 *pi/180),sin(360 *pi/180),0>

  // inner triangle
  0.35 * < cos(  0 *pi/180),sin(  0 *pi/180),0>
  0.35 * < cos(120 *pi/180),sin(120 *pi/180),0>
  0.35 * < cos(240 *pi/180),sin(240 *pi/180),0>
  0.35 * < cos(360 *pi/180),sin(360 *pi/180),0>
}

Note that the end points /should/ be identical. There are however some minor rounding differences, which mess up polygon computations. Compare with the following code, which leads to the desired results:

polygon { 8,
  // outer triangle
  0.70 * < cos(  0 *pi/180),sin(  0 *pi/180),0>
  0.70 * < cos(120 *pi/180),sin(120 *pi/180),0>
  0.70 * < cos(240 *pi/180),sin(240 *pi/180),0>
  0.70 * < cos(  0 *pi/180),sin(  0 *pi/180),0>

  // inner triangle
  0.35 * < cos(  0 *pi/180),sin(  0 *pi/180),0>
  0.35 * < cos(120 *pi/180),sin(120 *pi/180),0>
  0.35 * < cos(240 *pi/180),sin(240 *pi/180),0>
  0.35 * < cos(  0 *pi/180),sin(  0 *pi/180),0>
}

Code inspection shows that the polygon insideness testing code tests for precise equality of the points, whereas the general policy of POV-Ray is to accept slight rounding differences.

original post on povray.beta-test:

POV-Ray 3.7.0.RC3 on Slackware 13.0 x86_64.
I pointed povray to use the calibri.ttf font over on my Windows 7 partition.
The result is garbled - strange letters with accents appear instead of the
expected text. (KDE's kfontview opens calibri.ttf OK, with nothing strange).

Pointing povray to use other fonts of Win7, e.g. comic.ttf and arial.ttf, was
OK.

I solved the problem by pushing calibri.ttf through fontforge and resaving it
as mycalibri.ttf.

Cheers,
Peter

Confirmed with development version on Windows XP x64.

Possibly a similar problem as  FS#162 .

original posting from povray.beta-test:

I get this error message:
"Parse Error: bad allocation  Render failed"
- after the code below has been running for about 3 seconds.

// ===== 1 ======= 2 ======= 3 ======= 4 ======= 5 ======= 6 ======= 7

#version 3.7;

#while (true)
  #local Fn = function { transform { translate <0, 0, 0> } }
  #undef Fn
#end // while

// ===== 1 ======= 2 ======= 3 ======= 4 ======= 5 ======= 6 ======= 7

I'm using POV-Ray for Windows - Version 3.7.0.RC3.msvc9-sse2.win32
The operating system is Windows XP.

With the code above, the error messages has so far appeared every time
right after 3318K tokens have been parsed. But with other versions of
my code, the error message does not always show up. (Sometimes the
render finishes and sometimes the parsing stops at different "times".)

[...]

Other users report no error message, but memory consumption rising to about 1.2 GB.

The following SDL code causes a hard crash during parsing if _3024_dot_dat is undefined:

light_source {
    <0, 0, 0>
    color rgb 0.5*<1,0.905882,0.211765>
    fade_distance 500
    fade_power 1.6
    looks_like {_3024_dot_dat texture {
        pigment { rgbf <1,0.905882,0.211765,0.90> }
        finish { ambient 0.6 diffuse 0 phong 0.5 phong_size 40
            reflection 0.9
            refraction 1 ior 1.25
            }
        }
}    } 

The following scene reders differently with POV-Ray 3.7.0.RC3 than with POV-Ray 3.6.2:

camera
{
    right x*image_width/image_height
    location  <0, 0, -5>
    look_at   <0, 0, 0>
}

light_source
{
    <0,0,0>
    color rgb 1
    looks_like
    {
        box {
            <-1,-1,-0.1>, <1,1,0.1>
            pigment { wood }
            finish { ambient 5.0 diffuse 0 specular 0 phong 0 reflection 0 }
            scale 0.5
        }
    }
    translate <1,0,0>
}

plane
{
    <0, 1, 0>, -1
    texture
    {
        pigment { color rgb <0.5, 0.5, 0.55> }
        finish { specular 1.0 }
    }
}

See attachments for the output. As can be seen, POV-Ray 3.7 does translate the shape of the looks_like object along with the light source, but fails to translate the textures.

Subsurface scattering must be made radiosity-aware.

The following scene, showing an almost cylindrical cone floating above a plane, renders fine in POV 3.6.2, but is obviously broken in 3.7.0.beta.34:

camera {
  right     x
  up        y*image_height/image_width
  location  <80,50,40>
  look_at   <0,0,0>
}

light_source { <500,500,500> color rgb 1 }

cone {
  <0,0,30>, 11.303000, <0,0,-30>, 11.302999
  texture { pigment { color rgb 1 } }
}

plane { y, -20 texture { pigment { color rgb 0.3 } } }

The error occurs even with the -MB option, indicating that the problem has nothing to do with bounding, but is in the cone intersection testing code.

Bounding box computation for CSG intersection appears to be broken when one member is an arbitrarily transformed plane.

// +W640 +H480 +MB1

#include "transforms.inc"

camera {
  location  <-0.2, 0.5, -4.0>
  direction 1.5*z
  right     x*image_width/image_height
  look_at   <0.0, 0.0,  0.0>
}

sky_sphere {
  pigment {
    gradient y
    color_map {
      [0.0 rgb <0.6,0.7,1.0>]
      [0.7 rgb <0.0,0.1,0.8>]
    }
  }
}

light_source {
  <0, 0, 0>            // light's position (translated below)
  color rgb <1, 1, 1>  // light's color
  translate <-30, 30, -30>
}

plane {
  y, -1
  pigment { color rgb <0.7,0.5,0.3> }
}

intersection {
  sphere {
    0.0, 1 }
  plane { -x, 0 transform { Shear_Trans(x,y+x*0.3,z) } }
  texture {
    pigment {
      radial
      frequency 8
      color_map {
        [0.00 color rgb <1.0,0.4,0.2> ]
        [0.33 color rgb <0.2,0.4,1.0> ]
        [0.66 color rgb <0.4,1.0,0.2> ]
        [1.00 color rgb <1.0,0.4,0.2> ]
      }
    }
    finish{
      specular 0.6
    }
  }
  rotate -y*5
}

According to the docs, the panoramic camera...

[...] uses a type of cylindrical projection to be able to use viewing angles larger than 180 degrees with a tolerable lateral-stretching distortion. The angle keyword is used to determine the viewing angle.

However, current implementation differs (and probably always has): The angle keyword has no effect, and the effective viewing angle is fixed to 180 degrees. Also note that this behaviour is identical to the spherical camera with angle 180,180, making the panoramic camera obsolete.

I propose to deprecate the “panoramic” keyword; should the keyword be encountered in a camera block, the code for the spherical camera should be used instead, except that the angle setting should be forced to 180,180; this should be accompanied by a parse warning.

Some sample scenes are no longer up-to-date, causing warnings, and should be fixed. For instance, the advanced/benchmark scene still includes “Buffer_Output=Off” and “Buffer_Size=0” in its .ini file. This should be checked systematically, and fixed as appropriate.

Trace level is not handled properly with blobs using per-component reflective or refractive textures, leading to lockups. Stepping through the code, it seems that POV-Ray fails to properly mark the blob object as increasing the trace level.

(Until this bug is fixed, the issue can be worked around in most cases by assigning a reflective texture to the blob as a whole.)

The configure script for unix uses a dumb string compare to test whether libpng version is 1.2.5 or higher, leading it to reject (for instance) libpng 1.2.27 and unnecessarily compile and statically link the older libpng version it comes with.

POV-Ray 3.7 does not show output options, such as:

Output Options
  Image resolution 640 by 480 (rows 1 to 480, columns 1 to 640).
  Output file: D:\foo\test.png, 24 bpp PNG
  Graphic display......On  (gamma: 2.2)
  Mosaic preview.......Off
  CPU usage histogram..Off
  Continued trace......Off

(the above is what 3.6 used to show)

Currently, output image is buffered using POV-Ray’s RGBFT color model and floating point values, leading to a memory consumption of 20 bit per pixel. This is an unproportionally large memory footprint, given that the only further processing performed on the buffered data is conversion of the data to the desired output file format, which will typically use only 3 bytes per pixel (at most 12 bit per pixel).

The situation can be improved by choosing the output image buffer container based on the desired output file format and parameters. To this end, the following code changes should be made:

• Bundle image file format handler code into classes (typically one per file format)
• Include a method to determine the best data container type for the image buffer
• Instantiate the desired image file format handler object prior to rendering, querying the handler object for an image buffer

In addition to picking a suitable image data container from the already existing palette, careful design might also allow to use custom containers to directly pass the data to a library (in case the library provides its own buffering anyway), or write it directly to the output file (e.g. when writing image data to stdout). To make this compatible with multithreaded rendering, the following changes would have to be made:

• Add code to detect when a row of SMP blocks has been finished, and call a certain method on the image handler object
• Design the custom containers in such a way that they can buffer any number of unfinished SMP block rows as needed

In some cases it may be desirable to run POV-Ray from a batch file, without causing it to “steal the focus”.

I suggest making this dependant on whether POV-Ray is run with the /EXIT parameter.

Thin tori exhibit artifacts in 3.7.0 RC3 when the camera is placed inside the torus close to its “center plane”, as can be demonstrated with the following scene:

camera {
  location  <0.0, 0.0, -0.5>
  direction 1.5*z
  right     x*image_width/image_height
  look_at   <0.0, 0.0,  0.0>
  angle 1
}

light_source { <-30, 30, -30> color rgb 1 }

torus {
  1, 0.001
  texture { pigment { color red 1 } }
}

A pigment statement not wrapped in a texture statement does not properly override a pigment previously defined for the object. In the following SDL code:

  #declare PLANE = plane { y,0
    texture {
      pigment { checker color rgb 1 color rgb 0 scale 0.1 }
  } }
  object { PLANE
    pigment { checker color red 1 color blue 1 scale 1.0 }
  }

the scaling of the pigment previously specified for the PLANE object is retained for the new pigment. Compare:

  #declare PLANE = plane { y,0
    texture {
      pigment { checker color rgb 1 color rgb 0 scale 0.1 }
  } }
  object { PLANE
    texture {
      pigment { checker color red 1 color blue 1 scale 1.0 }
  } }

which behaves as expected.

The issue has been around at least since POV-Ray 3.6.2.

Blobs are currently limited to 1,000,000 components (with each cylindrical component counting as three: one cylinder + two end hemispheres); this limit may have served a historic purpose, but is now entirely arbitrary: The remaining code is limited only by the available RAM and the numeric limits of the int data type. The arbitrary maximum components limit per blob should therefore be removed.

Aside from unnecessarily limiting the power of the blob component, another drawback of the current test is that it is only performed after parsing of all the blob’s components, potentially hours after the limit had actually been reached.

The following scene has four spheres with different pigment color & filter settings:

- Left: filter 1
- Right: filter 0

- Top: red 0.0 green 0.5 blue 1.0
- Bottom: red 0.00 green 0.05 blue 0.10 (10% of the above)

Background is set to black, so that we only see the diffuse component of the object’s effective color.

Theoretically, both left spheres should be invisible, as they are fully transmissive (with a filtering effect), but apparently with a high filter setting, reducing an object’s pigment color actually increases the object’s effective diffuse color.

//+w600 +h600

global_settings{ assumed_gamma 1.0 }

camera {
  orthographic
  location  <0,0,-10>
  right 4*x
  up 4*y
  look_at   <0,0,0>
}

light_source{<10,10,-10> color rgb 1 parallel }

background { color rgb 0 }

default {
  finish {
    ambient 0
    diffuse 1
    specular 0
    phong 0
    reflection { 0.0 }
  }
}


sphere { <-1, 1, 0>, 0.8 texture { pigment { color rgb <0,0.5,1.0> filter 1.0 } } }
sphere { < 1, 1, 0>, 0.8 texture { pigment { color rgb <0,0.5,1.0> filter 0.0 } } }

sphere { <-1,-1, 0>, 0.8 texture { pigment { color rgb <0,0.5,1.0>*0.1 filter 1.0 } } }
sphere { < 1,-1, 0>, 0.8 texture { pigment { color rgb <0,0.5,1.0>*0.1 filter 0.0 } } }

This bug has been around in 3.6 already.

For some particularly “heavy” SDL scripts, it might be desirable to override (or complement) the standard “Parsing 47110815K tokens” progress information with some more helpful custom info, e.g. “Planting trees... (37%)”, or “Generating terrain mesh row 47 of 500”.

In POV-Ray 3.6 (including 3.62), checker and cells patterns are off by 0.001 (1e-3) units, as can be demonstrated with this scene:

camera {
  location  <0.0, 0.0, -5.0>
  direction 1.5*z
  right     x*image_width/image_height
  look_at   <0.0, 0.0,  0.0>
}

box { <-1,-1,0>, <0,0,1> pigment { checker color rgb 1 color rgb 0 scale   0.2 translate <-0.5,-0.5,0> } finish { ambient 1 diffuse 0 } }
box { < 1, 1,0>, <0,0,1> pigment { checker color rgb 1 color rgb 0 scale   0.2 translate < 0.5, 0.5,0> } finish { ambient 1 diffuse 0 } }
box { < 1,-1,0>, <0,0,1> pigment { checker color rgb 1 color rgb 0 scale 200.0 translate < 0.5,-0.5,0> } finish { ambient 1 diffuse 0 } }
box { <-1, 1,0>, <0,0,1> pigment { checker color rgb 1 color rgb 0 scale 200.0 translate <-0.5, 0.5,0> } finish { ambient 1 diffuse 0 } }

The same can be demonstrated for the cells pattern.

POV-Ray 3.7 beta 34 is “clean”.